← Commit history
README.md+66−17
@@ -2,26 +2,26 @@  **GR** · Timers / Clock Oscillators · SOP-14 -NE556 from GR, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.+NE556 from GR, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | DISCHARGE1 | output | Timer 1 discharge pin. Open-collector NPN transistor to GND; used to discharge the external timing capacitor when the internal flip-flop is set. VCE(sat) ~0.15 V @ 15 mA, leakage ~10 nA. |-| 2 | THRESHOLD1 | input | Timer 1 threshold input. When VTHRES rises above 2/3 VCC the internal comparator resets the flip-flop and drives OUT low. Input current ~250 nA typ. |-| 3 | CONTROL1 | input | Timer 1 control voltage. Direct access to the 2/3 VCC comparator reference; typically bypassed to GND with 10 nF. VCONT ~10 V typ at VCC=15 V; ~3.3 V typ at VCC=5 V. |-| 4 | RESET1 | input | Timer 1 active-low reset. When pulled below ~0.7 V the timer output is forced low and the discharge transistor turns on, regardless of TRIG/THRES. Tie to VCC when reset is not used. |-| 5 | OUTPUT1 | output | Timer 1 push-pull output. Sources or sinks up to 200 mA. VOH ~12.0 V at IOH=-200 mA (VCC=15 V); VOL ~2.7 V at IOL=200 mA. Rise/fall ~100 ns with CL=15 pF. |-| 6 | TRIGGER1 | input | Timer 1 active-low trigger input. When VTRIG falls below 1/3 VCC the flip-flop is set, driving OUT high and turning off the discharge transistor. Input current ~500 nA typ. |-| 7 | GND | power_in | Device ground, shared by both timers. 0 V reference. |-| 8 | TRIGGER2 | input | Timer 2 active-low trigger input. When VTRIG falls below 1/3 VCC the flip-flop is set, driving OUT high and turning off the discharge transistor. Input current ~500 nA typ. |-| 9 | OUTPUT2 | output | Timer 2 push-pull output. Sources or sinks up to 200 mA. VOH ~12.0 V at IOH=-200 mA (VCC=15 V); VOL ~2.7 V at IOL=200 mA. |-| 10 | RESET2 | input | Timer 2 active-low reset. When pulled below ~0.7 V the timer output is forced low and the discharge transistor turns on. Tie to VCC when reset is not used. |-| 11 | CONTROL2 | input | Timer 2 control voltage. Direct access to the 2/3 VCC comparator reference; typically bypassed to GND with 10 nF. |-| 12 | THRESHOLD2 | input | Timer 2 threshold input. When VTHRES rises above 2/3 VCC the internal comparator resets the flip-flop and drives OUT low. |-| 13 | DISCHARGE2 | output | Timer 2 discharge pin. Open-collector NPN transistor to GND; used to discharge the external timing capacitor. |-| 14 | VCC | power_in | Positive supply, shared by both timers. Operating range 4.5 V to 16 V; absolute maximum 18 V. ICC ~11 mA typ at VCC=15 V (output high). |+| 1 | Discharge | passive | Discharge pin of the first 555 timer, which switches to ground when the output is low, with on-voltage VDISL of 0.15 to 0.5 V at 15 mA and off-state leakage of 10 nA max at 15 V (VCC = 15 V). |+| 2 | Threshold | input | Threshold comparator input of the first timer, with threshold voltage of 8.8 to 11.2 V at VCC = 15 V and threshold current of 250 nA max at 11.2 V. |+| 3 | Control Voltage | passive | Control voltage node of the first timer, specified at 8 to 11 V with VCC = 15 V and 2.6 to 4 V with VCC = 5 V. |+| 4 | Reset | input | Active-low reset input of the first timer; a low level forces the output low and the discharge on, with reset current of up to 10 µA at VRESET = 0.4 V and VCC = 15 V. |+| 5 | Output | output | Output of the first timer, which can sink up to 200 mA (VOL 2.7 V max at IOL = 200 mA, VCC = 15 V) and gives VOH of 12.0 V min at IOH = -200 mA with VCC = 15 V. |+| 6 | Trigger | input | Trigger input of the first timer, with trigger voltage of 4.5 to 5.6 V at VCC = 15 V and trigger current of 500 nA max at VTRIG = 0 V. |+| 7 | GND | power_in | Ground reference shared by both timers and the supply. |+| 8 | Trigger | input | Trigger input of the second timer, with trigger voltage of 4.5 to 5.6 V at VCC = 15 V and trigger current of 500 nA max at VTRIG = 0 V. |+| 9 | Output | output | Output of the second timer, which can sink up to 200 mA (VOL 2.7 V max at IOL = 200 mA, VCC = 15 V) and gives VOH of 12.0 V min at IOH = -200 mA with VCC = 15 V. |+| 10 | Reset | input | Active-low reset input of the second timer; a low level forces the output low and the discharge on, with reset current of up to 10 µA at VRESET = 0.4 V and VCC = 15 V. |+| 11 | Control Voltage | passive | Control voltage node of the second timer, specified at 8 to 11 V with VCC = 15 V and 2.6 to 4 V with VCC = 5 V. |+| 12 | Threshold | input | Threshold comparator input of the second timer, with threshold voltage of 8.8 to 11.2 V at VCC = 15 V and threshold current of 250 nA max at 11.2 V. |+| 13 | Discharge | passive | Discharge pin of the second timer, which switches to ground when the output is low, with on-voltage VDISL of 0.15 to 0.5 V at 15 mA and off-state leakage of 10 nA max at 15 V (VCC = 15 V). |+| 14 | VCC | power_in | Supply pin for both timers, with operating supply range of 4.5 to 16 V and absolute maximum of 18 V. |  ## Key specifications @@ -32,6 +32,55 @@ NE556 from GR, in a SOP-14. Pinout and pin descriptions extracted from the manuf | Category | RTC | | Pins | 14 | +## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Supply voltage | VCC |  |  | 18 | V |  | 2 |+| Power dissipation | PD |  |  | 400 | mW |  | 2 |+| Operating temperature | TA | 0 |  | 70 | ℃ |  | 2 |+| Storage temperature | TS | -65 |  | 150 | ℃ |  | 2 |+| Soldering temperature | TW |  |  | 260 | ℃ | 10 s | 2 |+| Operating voltage | VCC | 4.5 |  | 16 | V |  | 3 |+| Supply current (VOUT high) | ICC |  | 5 | 10 | mA | VCC=5V, VOUT=H, RL=∞ | 3 |+| Supply current (VOUT high) | ICC |  | 11 | 20 | mA | VCC=15V, VOUT=H, RL=∞ | 3 |+| Supply current (VOUT low) | ICC |  | 17 | 30 | mA | VCC=15V, VOUT=L, RL=∞ | 3 |+| Control voltage | VCont | 8 | 10 | 11 | V | VCC=15V | 3 |+| Control voltage | VCont | 2.6 | 3.3 | 4 | V | VCC=5V | 3 |+| Threshold voltage | VTH | 8.8 | 10 | 11.2 | V | VCC=15V | 3 |+| Threshold voltage | VTH | 2.4 | 3.3 | 4.2 | V | VCC=5V | 3 |+| Threshold current | ITH |  |  | 250 | nA | VCC=15V, VTH=11.2V | 3 |+| Trigger voltage | VTRIG | 4.5 | 5 | 5.6 | V | VCC=15V | 3 |+| Trigger voltage | VTRIG | 1.1 | 1.67 | 2.2 | V | VCC=5V | 3 |+| Trigger current | ITRIG |  |  | 500 | nA | VCC=15V, VTRIG=0V | 3 |+| Reset voltage | VRESET |  | 0.7 | 1.5 | V | VCC=15V | 3 |+| Reset current | IRESET | 0.4 | 0.3 | 10 | uA | VRESET=0.4V, VCC=15V | 3 |+| Reset current | IRESET |  | 0.2 | 1 | mA | VRESET=0V, VCC=15V | 3 |+| Discharge transistor leakage current | IDIS(off) |  |  | 10 | nA | VCC=15V, VDIS=15V | 3 |+| Discharge transistor saturation voltage | VDISL |  | 0.15 | 0.5 | V | VCC=15V, IDISL=15mA | 3 |+| Output low voltage | VOL |  |  | 0.05 | V | VCC=15V, IOL=5mA | 3 |+| Output low voltage | VOL |  |  | 0.4 | V | VCC=15V, IOL=50mA | 3 |+| Output low voltage | VOL |  |  | 1.4 | V | VCC=15V, IOL=100mA | 3 |+| Output low voltage | VOL |  |  | 2.7 | V | VCC=15V, IOL=200mA | 3 |+| Output low voltage | VOL |  |  | 0.08 | V | VCC=5V, IOL=5mA | 3 |+| Output low voltage | VOL |  |  | 0.15 | V | VCC=5V, IOL=8mA | 3 |+| Output high voltage | VOH |  |  | 13.3 | V | VCC=15V, IOH=-100mA | 3 |+| Output high voltage | VOH |  |  | 12 | V | VCC=15V, IOH=-200mA | 3 |+| Output high voltage | VOH |  |  | 3.3 | V | VCC=5V, IOH=-100mA | 3 |+| Output rise time | tR |  |  | 100 | ns | VCC=15V, CL=15pF | 3 |+| Output fall time | tF |  |  | 100 | ns | VCC=15V, CL=15pF | 3 |+| Timing initial interval error, monostable | tmer |  |  | 1 | % | VCC=15V | 3 |+| Timing initial interval error, astable | taer |  |  | 2 | % | VCC=15V | 3 |+| Timer1-timer2 initial interval error difference | td12er | -1 |  | 1 | % |  | 3 |+| Timing voltage sensitivity, monostable | tmv |  |  | 0.1 | %/V | VCC=5V to 15V | 3 |+| Timing voltage sensitivity, astable | tav |  |  | 0.3 | %/V | VCC=5V to 15V | 3 |+| Timer1-timer2 voltage sensitivity difference | td12v | -0.2 |  | 0.2 | %/V |  | 3 |+| Timing temperature sensitivity, monostable | tmt |  |  | 50 | ppm/℃ | VCC=15V, TA=0 to 60℃ | 3 |+| Timing temperature sensitivity, astable | tat |  |  | 150 | ppm/℃ | VCC=15V, TA=0 to 60℃ | 3 |+| Timer1-timer2 temperature sensitivity difference | td12t | -10 |  | 10 | ppm/℃ |  | 3 |+ ## CAD (KiCad official)  - Symbol: `NE556`@@ -43,9 +92,9 @@ NE556 from GR, in a SOP-14. Pinout and pin descriptions extracted from the manuf  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [GR datasheet](docs/ne556-datasheet.pdf) (6 pp, sha256 `c3f223235fefd260`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet:** [GR datasheet](docs/ne556-datasheet.pdf) (6 pp, sha256 `c3f223235fefd260`, retrieved 2026-11-13, tier: lcsc) - **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.-- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).  [Datasheet PDF](docs/ne556-datasheet.pdf)
docs/hero.png
⋯ 1 unchanged line ⋯
ne556-hero.glbadded
⋯ 1 unchanged line ⋯
ne556-hero.overlay.jsonadded+392
@@ -0,0 +1,392 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "NE556",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 14,+      "span_mm": 8.22,+      "dash_mm": 0.2055,+      "gap_mm": 0.1233,+      "pad_stroke_mm": 0.0493+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 7,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 14,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.658,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -3.0,+      3.0,+      -4.015,+      4.015+    ],+    "pads_bbox_mm": [+      -3.45,+      3.45,+      -4.11,+      4.11+    ],+    "seating_z_mm": -0.0+  },+  "sources": {+    "glb": "ne556-etched.glb",+    "glb_sha256": "8c61fc58114c55e53bac594757709f22ed4fab89bef6e9e07d1ab63a785f3c80",+    "footprint": "ne556.kicad_mod",+    "footprint_sha256": "a885b619b22880c9559522d2bf865b059d80453b95a98defc9e6ceef284da1fc",+    "pins": "page.json component.pins",+    "pins_sha256": "3d126ca18cf5f205c26a63ad8016b487af7eba6c34705676323c1076be0fccbe"+  },+  "generator": "adom-wiki 1.8.24 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "Discharge",+      "x": -3.6,+      "y": -3.81,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "2",+      "text": "Threshold",+      "x": -3.6,+      "y": -2.54,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "3",+      "text": "Control Voltage",+      "x": -3.6,+      "y": -1.27,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "4",+      "text": "Reset",+      "x": -3.6,+      "y": 0.0,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "5",+      "text": "Output",+      "x": -3.6,+      "y": 1.27,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "6",+      "text": "Trigger",+      "x": -3.6,+      "y": 2.54,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "7",+      "text": "GND",+      "x": -3.6,+      "y": 3.81,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "8",+      "text": "Trigger",+      "x": 3.6,+      "y": 3.81,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "9",+      "text": "Output",+      "x": 3.6,+      "y": 2.54,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "10",+      "text": "Reset",+      "x": 3.6,+      "y": 1.27,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "11",+      "text": "Control Voltage",+      "x": 3.6,+      "y": 0.0,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "12",+      "text": "Threshold",+      "x": 3.6,+      "y": -1.27,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "13",+      "text": "Discharge",+      "x": 3.6,+      "y": -2.54,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "14",+      "text": "VCC",+      "x": 3.6,+      "y": -3.81,+      "align": "left",+      "vertical": false,+      "h": 0.6+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        -3.81+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        -2.54+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        -1.27+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        0.0+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        1.27+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        2.54+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        3.81+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        3.81+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "9",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        2.54+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "10",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        1.27+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "11",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        0.0+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "12",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        -1.27+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "13",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        -2.54+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "14",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        -3.81+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    }+  ]+}
ne556.kicad_sym+68−360
@@ -1,361 +1,69 @@-(kicad_symbol_lib-	(version 20251024)-	(generator "kicad_symbol_editor")-	(generator_version "10.0")-(symbol "NE556"-		(exclude_from_sim no)-		(in_bom yes)-		(on_board yes)-		(in_pos_files yes)-		(duplicate_pin_numbers_are_jumpers no)-		(property "Reference" "U"-			(at -10.16 8.89 0)-			(show_name no)-			(do_not_autoplace no)-			(effects-				(font-					(size 1.27 1.27)-				)-				(justify left)-			)-		)-		(property "Value" "NE556"-			(at -10.16 -8.89 0)-			(show_name no)-			(do_not_autoplace no)-			(effects-				(font-					(size 1.27 1.27)-				)-				(justify left)-			)-		)-		(property "Footprint" ""-			(at 0 0 0)-			(show_name no)-			(do_not_autoplace no)-			(hide yes)-			(effects-				(font-					(size 1.27 1.27)-				)-			)-		)-		(property "Datasheet" "https://www.mouser.com/datasheet/2/405/lm556-405954.pdf"-			(at 0 -24.13 0)-			(show_name no)-			(do_not_autoplace no)-			(hide yes)-			(effects-				(font-					(size 1.27 1.27)-				)-			)-		)-		(property "Description" "Dual Timer, DIP-14/SOIC-14"-			(at 0 -21.59 0)-			(show_name no)-			(do_not_autoplace no)-			(hide yes)-			(effects-				(font-					(size 1.27 1.27)-				)-			)-		)-		(property "ki_keywords" "dual timer"-			(at 0 0 0)-			(show_name no)-			(do_not_autoplace no)-			(hide yes)-			(effects-				(font-					(size 1.27 1.27)-				)-			)-		)-		(property "ki_fp_filters" "DIP*W7.62mm* TSSOP*5.3x6.2mm*P0.65mm* SOIC*3.9x8.7mm*P1.27mm*"-			(at 0 0 0)-			(show_name no)-			(do_not_autoplace no)-			(hide yes)-			(effects-				(font-					(size 1.27 1.27)-				)-			)-		)-		(symbol "NE556_0_0"-			(pin power_in line-				(at 0 -10.16 90)-				(length 2.54)-				(name "GND"-					(effects-						(font-							(size 1.27 1.27)-						)-					)-				)-				(number "7"-					(effects-						(font-							(size 1.27 1.27)-						)-					)-				)-			)-			(pin power_in line-				(at 2.54 10.16 270)-				(length 2.54)-				(name "VCC"-					(effects-						(font-							(size 1.27 1.27)-						)-					)-				)-				(number "14"-					(effects-						(font-							(size 1.27 1.27)-						)-					)-				)-			)-		)-		(symbol "NE556_0_1"-			(rectangle-				(start -7.62 7.62)-				(end 7.62 -7.62)-				(stroke-					(width 0.254)-					(type default)-				)-				(fill-					(type background)-				)-			)-		)-		(symbol "NE556_1_1"-			(pin input line-				(at -10.16 2.54 0)-				(length 2.54)-				(name "DISCH"-					(effects-						(font-							(size 1.27 1.27)-						)-					)-				)-				(number "1"-					(effects-						(font-							(size 1.27 1.27)-						)-					)-				)-			)-			(pin input line-				(at -10.16 -2.54 0)-				(length 2.54)-				(name "THRES"-					(effects-						(font-							(size 1.27 1.27)-						)-					)-				)-				(number "2"-					(effects-						(font-							(size 1.27 1.27)-						)-					)-				)-			)-			(pin passive line-				(at 0 10.16 270)-				(length 2.54)-				(name "CONT"-					(effects-						(font-							(size 1.27 1.27)-						)-					)-				)-				(number "3"-					(effects-						(font-							(size 1.27 1.27)-						)-					)-				)-			)-			(pin input line-				(at -10.16 5.08 0)-				(length 2.54)-				(name "~{RST}"-					(effects-						(font-							(size 1.27 1.27)-						)-					)-				)-				(number "4"-					(effects-						(font-							(size 1.27 1.27)-						)-					)-				)-			)-			(pin output line-				(at 10.16 0 180)-				(length 2.54)-				(name "OUT"-					(effects-						(font-							(size 1.27 1.27)-						)-					)-				)-				(number "5"-					(effects-						(font-							(size 1.27 1.27)-						)-					)-				)-			)-			(pin input line-				(at -10.16 -5.08 0)-				(length 2.54)-				(name "TRIG"-					(effects-						(font-							(size 1.27 1.27)-						)-					)-				)-				(number "6"-					(effects-						(font-							(size 1.27 1.27)-						)-					)-				)-			)-		)-		(symbol "NE556_2_1"-			(pin input line-				(at -10.16 -5.08 0)-				(length 2.54)-				(name "TRIG"-					(effects-						(font-							(size 1.27 1.27)-						)-					)-				)-				(number "8"-					(effects-						(font-							(size 1.27 1.27)-						)-					)-				)-			)-			(pin output line-				(at 10.16 0 180)-				(length 2.54)-				(name "OUT"-					(effects-						(font-							(size 1.27 1.27)-						)-					)-				)-				(number "9"-					(effects-						(font-							(size 1.27 1.27)-						)-					)-				)-			)-			(pin input line-				(at -10.16 5.08 0)-				(length 2.54)-				(name "~{RST}"-					(effects-						(font-							(size 1.27 1.27)-						)-					)-				)-				(number "10"-					(effects-						(font-							(size 1.27 1.27)-						)-					)-				)-			)-			(pin passive line-				(at 0 10.16 270)-				(length 2.54)-				(name "CONT"-					(effects-						(font-							(size 1.27 1.27)-						)-					)-				)-				(number "11"-					(effects-						(font-							(size 1.27 1.27)-						)-					)-				)-			)-			(pin input line-				(at -10.16 -2.54 0)-				(length 2.54)-				(name "THRES"-					(effects-						(font-							(size 1.27 1.27)-						)-					)-				)-				(number "12"-					(effects-						(font-							(size 1.27 1.27)-						)-					)-				)-			)-			(pin input line-				(at -10.16 2.54 0)-				(length 2.54)-				(name "DISCH"-					(effects-						(font-							(size 1.27 1.27)-						)-					)-				)-				(number "13"-					(effects-						(font-							(size 1.27 1.27)-						)-					)-				)-			)-		)-		(embedded_fonts no)-	)+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+  (symbol "NE556" (in_bom yes) (on_board yes)+    (property "Reference" "U" (at 0 12.70 0) (effects (font (size 1.27 1.27))))+    (property "Value" "NE556" (at 0 -12.70 0) (effects (font (size 1.27 1.27))))+    (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+    (symbol "NE556_0_1"+    (rectangle (start -15.24 10.16) (end 15.24 -10.16)+      (stroke (width 0.254) (type default)) (fill (type background)))+    )+    (symbol "NE556_1_1"+    (pin passive line (at -20.32 7.62 0) (length 5.08)+      (name "Discharge" (effects (font (size 1.27 1.27))))+      (number "1" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at -20.32 5.08 0) (length 5.08)+      (name "Threshold" (effects (font (size 1.27 1.27))))+      (number "2" (effects (font (size 1.27 1.27))))+    )+    (pin passive line (at -20.32 2.54 0) (length 5.08)+      (name "Control Voltage" (effects (font (size 1.27 1.27))))+      (number "3" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at -20.32 0.00 0) (length 5.08)+      (name "Reset" (effects (font (size 1.27 1.27))))+      (number "4" (effects (font (size 1.27 1.27))))+    )+    (pin output line (at -20.32 -2.54 0) (length 5.08)+      (name "Output" (effects (font (size 1.27 1.27))))+      (number "5" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at -20.32 -5.08 0) (length 5.08)+      (name "Trigger" (effects (font (size 1.27 1.27))))+      (number "6" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at -20.32 -7.62 0) (length 5.08)+      (name "GND" (effects (font (size 1.27 1.27))))+      (number "7" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at 20.32 7.62 180) (length 5.08)+      (name "VCC" (effects (font (size 1.27 1.27))))+      (number "14" (effects (font (size 1.27 1.27))))+    )+    (pin passive line (at 20.32 5.08 180) (length 5.08)+      (name "Discharge" (effects (font (size 1.27 1.27))))+      (number "13" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 20.32 2.54 180) (length 5.08)+      (name "Threshold" (effects (font (size 1.27 1.27))))+      (number "12" (effects (font (size 1.27 1.27))))+    )+    (pin passive line (at 20.32 0.00 180) (length 5.08)+      (name "Control Voltage" (effects (font (size 1.27 1.27))))+      (number "11" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 20.32 -2.54 180) (length 5.08)+      (name "Reset" (effects (font (size 1.27 1.27))))+      (number "10" (effects (font (size 1.27 1.27))))+    )+    (pin output line (at 20.32 -5.08 180) (length 5.08)+      (name "Output" (effects (font (size 1.27 1.27))))+      (number "9" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 20.32 -7.62 180) (length 5.08)+      (name "Trigger" (effects (font (size 1.27 1.27))))+      (number "8" (effects (font (size 1.27 1.27))))+    )+    )+  ) )
ne556.lbr+34−35
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description>Dual Timer, DIP-14/SOIC-14</description>+<description></description> <packages> <package name="SOIC-14_3.9x8.7mm_P1.27mm">   <description>SOIC-14, 3.9 x 8.7 mm, 1.27 mm pitch</description>@@ -92,52 +92,51 @@ </packages> <symbols> <symbol name="NE556">-  <description>Dual Timer, DIP-14/SOIC-14</description>-  <wire x1="-10.16" y1="20.32" x2="10.16" y2="20.32" width="0.254" layer="94"/>-  <wire x1="10.16" y1="20.32" x2="10.16" y2="-17.78" width="0.254" layer="94"/>-  <wire x1="10.16" y1="-17.78" x2="-10.16" y2="-17.78" width="0.254" layer="94"/>-  <wire x1="-10.16" y1="-17.78" x2="-10.16" y2="20.32" width="0.254" layer="94"/>-  <text x="-10.1600" y="8.8900" size="1.27" layer="95" align="center">&gt;NAME</text>-  <text x="-10.1600" y="-8.8900" size="1.27" layer="96" align="center">&gt;VALUE</text>-  <pin name="GND" x="-15.24" y="-12.7" length="middle" direction="pwr"/>-  <pin name="VCC" x="-15.24" y="-15.240000000000002" length="middle" direction="pwr"/>-  <pin name="DISCH" x="-15.24" y="17.78" length="middle" direction="in"/>-  <pin name="THRES" x="-15.24" y="12.700000000000001" length="middle" direction="in"/>-  <pin name="CONT" x="-15.24" y="-5.079999999999998" length="middle" direction="pas"/>-  <pin name="RST" x="-15.24" y="2.540000000000001" length="middle" direction="in"/>-  <pin name="OUT" x="15.24" y="17.78" length="middle" direction="out" rot="R180"/>-  <pin name="TRIG" x="-15.24" y="7.620000000000001" length="middle" direction="in"/>-  <pin name="TRIG@2" x="-15.24" y="5.080000000000002" length="middle" direction="in"/>-  <pin name="OUT@2" x="15.24" y="15.240000000000002" length="middle" direction="out" rot="R180"/>-  <pin name="RST@2" x="-15.24" y="0" length="middle" direction="in"/>-  <pin name="CONT@2" x="-15.24" y="-7.619999999999997" length="middle" direction="pas"/>-  <pin name="THRES@2" x="-15.24" y="10.16" length="middle" direction="in"/>-  <pin name="DISCH@2" x="-15.24" y="15.240000000000002" length="middle" direction="in"/>+  <wire x1="-15.24" y1="10.16" x2="15.24" y2="10.16" width="0.254" layer="94"/>+  <wire x1="15.24" y1="10.16" x2="15.24" y2="-10.16" width="0.254" layer="94"/>+  <wire x1="15.24" y1="-10.16" x2="-15.24" y2="-10.16" width="0.254" layer="94"/>+  <wire x1="-15.24" y1="-10.16" x2="-15.24" y2="10.16" width="0.254" layer="94"/>+  <text x="0.0000" y="12.7000" size="1.27" layer="95" align="center">&gt;NAME</text>+  <text x="0.0000" y="-12.7000" size="1.27" layer="96" align="center">&gt;VALUE</text>+  <pin name="Discharge" x="-20.32" y="7.62" length="middle" direction="pas"/>+  <pin name="Threshold" x="-20.32" y="5.08" length="middle" direction="in"/>+  <pin name="Control_Voltage" x="-20.32" y="2.54" length="middle" direction="pas"/>+  <pin name="Reset" x="-20.32" y="0" length="middle" direction="in"/>+  <pin name="Output" x="-20.32" y="-2.54" length="middle" direction="out"/>+  <pin name="Trigger" x="-20.32" y="-5.08" length="middle" direction="in"/>+  <pin name="GND" x="-20.32" y="-7.62" length="middle" direction="pwr"/>+  <pin name="VCC" x="20.32" y="7.62" length="middle" direction="pwr" rot="R180"/>+  <pin name="Discharge@2" x="20.32" y="5.08" length="middle" direction="pas" rot="R180"/>+  <pin name="Threshold@2" x="20.32" y="2.54" length="middle" direction="in" rot="R180"/>+  <pin name="Control_Voltage@2" x="20.32" y="0" length="middle" direction="pas" rot="R180"/>+  <pin name="Reset@2" x="20.32" y="-2.54" length="middle" direction="in" rot="R180"/>+  <pin name="Output@2" x="20.32" y="-5.08" length="middle" direction="out" rot="R180"/>+  <pin name="Trigger@2" x="20.32" y="-7.62" length="middle" direction="in" rot="R180"/> </symbol> </symbols> <devicesets> <deviceset name="NE556" prefix="U">-  <description>Dual Timer, DIP-14/SOIC-14</description>+  <description></description>   <gates>     <gate name="G$1" symbol="NE556" x="0" y="0"/>   </gates>   <devices>     <device name="" package="SOIC-14_3.9x8.7mm_P1.27mm">       <connects>+        <connect gate="G$1" pin="Discharge" pad="1"/>+        <connect gate="G$1" pin="Threshold" pad="2"/>+        <connect gate="G$1" pin="Control_Voltage" pad="3"/>+        <connect gate="G$1" pin="Reset" pad="4"/>+        <connect gate="G$1" pin="Output" pad="5"/>+        <connect gate="G$1" pin="Trigger" pad="6"/>         <connect gate="G$1" pin="GND" pad="7"/>         <connect gate="G$1" pin="VCC" pad="14"/>-        <connect gate="G$1" pin="DISCH" pad="1"/>-        <connect gate="G$1" pin="THRES" pad="2"/>-        <connect gate="G$1" pin="CONT" pad="3"/>-        <connect gate="G$1" pin="RST" pad="4"/>-        <connect gate="G$1" pin="OUT" pad="5"/>-        <connect gate="G$1" pin="TRIG" pad="6"/>-        <connect gate="G$1" pin="TRIG@2" pad="8"/>-        <connect gate="G$1" pin="OUT@2" pad="9"/>-        <connect gate="G$1" pin="RST@2" pad="10"/>-        <connect gate="G$1" pin="CONT@2" pad="11"/>-        <connect gate="G$1" pin="THRES@2" pad="12"/>-        <connect gate="G$1" pin="DISCH@2" pad="13"/>+        <connect gate="G$1" pin="Discharge@2" pad="13"/>+        <connect gate="G$1" pin="Threshold@2" pad="12"/>+        <connect gate="G$1" pin="Control_Voltage@2" pad="11"/>+        <connect gate="G$1" pin="Reset@2" pad="10"/>+        <connect gate="G$1" pin="Output@2" pad="9"/>+        <connect gate="G$1" pin="Trigger@2" pad="8"/>       </connects>       <technologies><technology name=""/></technologies>     </device>
package.json+201−6
@@ -1,12 +1,14 @@ {   "slug": "ne556",-  "version": "0.1.1",+  "version": "0.1.2",   "type": "component",-  "description": "GR Timers / Clock Oscillators, SOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "description": "GR Timers / Clock Oscillators, SOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [     "component",     "rtc",-    "ne556"+    "ne556",+    "factory-2.0.0",+    "extractor-text"   ],   "dependencies": {},   "hero": {@@ -25,8 +27,201 @@     "docs/ne556-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html",-    "ne556-etched.glb",-    "ne556-etched.step"+    "ne556-hero.glb",+    "ne556-hero.overlay.json"   ],-  "visibility": "public"+  "component": {+    "mpn": "NE556",+    "manufacturer": "GR",+    "package": "SOP-14",+    "pin_count": 14,+    "category": "RTC",+    "subcategory": "Timers / Clock Oscillators",+    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/0870676f7ccdbc2e019811122a96a5d7.pdf",+    "parts": {+      "symbol": "ne556.kicad_sym",+      "footprint": "ne556.kicad_mod",+      "model_3d": "ne556-hero.glb",+      "model_3d_plain": "ne556.glb",+      "model_3d_step": "ne556-etched.step",+      "model_3d_step_plain": "ne556.step",+      "lbr": "ne556.lbr"+    },+    "distributor_links": {+      "mouser": "512-NE556"+    },+    "distributor_check": {+      "checked_at": "2026-11-13T07:40:06Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": null,+        "status": "no match"+      },+      "mouser": {+        "pn": "512-NE556",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "Discharge",+        "type": "passive",+        "description": "Discharge pin of the first 555 timer, which switches to ground when the output is low, with on-voltage VDISL of 0.15 to 0.5 V at 15 mA and off-state leakage of 10 nA max at 15 V (VCC = 15 V)."+      },+      {+        "number": "2",+        "name": "Threshold",+        "type": "input",+        "description": "Threshold comparator input of the first timer, with threshold voltage of 8.8 to 11.2 V at VCC = 15 V and threshold current of 250 nA max at 11.2 V."+      },+      {+        "number": "3",+        "name": "Control Voltage",+        "type": "passive",+        "description": "Control voltage node of the first timer, specified at 8 to 11 V with VCC = 15 V and 2.6 to 4 V with VCC = 5 V."+      },+      {+        "number": "4",+        "name": "Reset",+        "type": "input",+        "description": "Active-low reset input of the first timer; a low level forces the output low and the discharge on, with reset current of up to 10 µA at VRESET = 0.4 V and VCC = 15 V."+      },+      {+        "number": "5",+        "name": "Output",+        "type": "output",+        "description": "Output of the first timer, which can sink up to 200 mA (VOL 2.7 V max at IOL = 200 mA, VCC = 15 V) and gives VOH of 12.0 V min at IOH = -200 mA with VCC = 15 V."+      },+      {+        "number": "6",+        "name": "Trigger",+        "type": "input",+        "description": "Trigger input of the first timer, with trigger voltage of 4.5 to 5.6 V at VCC = 15 V and trigger current of 500 nA max at VTRIG = 0 V."+      },+      {+        "number": "7",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference shared by both timers and the supply."+      },+      {+        "number": "8",+        "name": "Trigger",+        "type": "input",+        "description": "Trigger input of the second timer, with trigger voltage of 4.5 to 5.6 V at VCC = 15 V and trigger current of 500 nA max at VTRIG = 0 V."+      },+      {+        "number": "9",+        "name": "Output",+        "type": "output",+        "description": "Output of the second timer, which can sink up to 200 mA (VOL 2.7 V max at IOL = 200 mA, VCC = 15 V) and gives VOH of 12.0 V min at IOH = -200 mA with VCC = 15 V."+      },+      {+        "number": "10",+        "name": "Reset",+        "type": "input",+        "description": "Active-low reset input of the second timer; a low level forces the output low and the discharge on, with reset current of up to 10 µA at VRESET = 0.4 V and VCC = 15 V."+      },+      {+        "number": "11",+        "name": "Control Voltage",+        "type": "passive",+        "description": "Control voltage node of the second timer, specified at 8 to 11 V with VCC = 15 V and 2.6 to 4 V with VCC = 5 V."+      },+      {+        "number": "12",+        "name": "Threshold",+        "type": "input",+        "description": "Threshold comparator input of the second timer, with threshold voltage of 8.8 to 11.2 V at VCC = 15 V and threshold current of 250 nA max at 11.2 V."+      },+      {+        "number": "13",+        "name": "Discharge",+        "type": "passive",+        "description": "Discharge pin of the second timer, which switches to ground when the output is low, with on-voltage VDISL of 0.15 to 0.5 V at 15 mA and off-state leakage of 10 nA max at 15 V (VCC = 15 V)."+      },+      {+        "number": "14",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply pin for both timers, with operating supply range of 4.5 to 16 V and absolute maximum of 18 V."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-5-5",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: The pin table on page 1 is printed for both DIP14 and SOP14 together. The SOP14 outline drawing on p; The datasheet does not assign KiCad ERC classes. Types are my judgment: Discharge and Control Voltag; Pin descriptions are limits taken from the electrical characteristics table at TA = 25 °C. Several t"+        ],+        "pages_sent": 6,+        "cost_usd": 0.0517,+        "at": "2026-11-13T07:40:36"+      },+      "datasheet": {+        "url": "https://datasheet.lcsc.com/datasheet/pdf/0870676f7ccdbc2e019811122a96a5d7.pdf",+        "pages": 6,+        "sha256": "c3f223235fefd260",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 14,+        "described": 14,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "ne556.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          8.7,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "3b9a775da256c8afcc28dcddfbc2eb3f266107fe61ce8446d96f2c52b6f44a70",+        "checked": "2026-11-13",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ne556-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          8.7,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "8a9b2ba5460bbd7d1fac8e619352a1b86c6fe55e66ab030ad4edfd50949c8d0b",+        "checked": "2026-11-13",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  } }
page.json+74−43
@@ -4,12 +4,14 @@   "slug": "ne556",   "title": "NE556",   "brief": "GR Timers / Clock Oscillators, SOP-14. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.1",+  "version": "0.1.2",   "license": "CC-BY-SA-4.0",   "tags": [     "component",     "rtc",-    "ne556"+    "ne556",+    "factory-2.0.0",+    "extractor-text"   ],   "component": {     "mpn": "NE556",@@ -18,107 +20,136 @@     "pin_count": 14,     "category": "RTC",     "subcategory": "Timers / Clock Oscillators",-    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2309150924_GR-NE556_C18164404.pdf",+    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/0870676f7ccdbc2e019811122a96a5d7.pdf",     "parts": {       "symbol": "ne556.kicad_sym",       "footprint": "ne556.kicad_mod",-      "model_3d": "ne556-etched.glb",+      "model_3d": "ne556-hero.glb",       "model_3d_plain": "ne556.glb",       "model_3d_step": "ne556-etched.step",       "model_3d_step_plain": "ne556.step",       "lbr": "ne556.lbr"     },-    "distributor_links": {},+    "distributor_links": {+      "mouser": "512-NE556"+    },+    "distributor_check": {+      "checked_at": "2026-11-13T07:40:06Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": null,+        "status": "no match"+      },+      "mouser": {+        "pn": "512-NE556",+        "status": "found"+      }+    },     "pins": [       {         "number": "1",-        "name": "DISCHARGE1",-        "type": "output",-        "description": "Timer 1 discharge pin. Open-collector NPN transistor to GND; used to discharge the external timing capacitor when the internal flip-flop is set. VCE(sat) ~0.15 V @ 15 mA, leakage ~10 nA."+        "name": "Discharge",+        "type": "passive",+        "description": "Discharge pin of the first 555 timer, which switches to ground when the output is low, with on-voltage VDISL of 0.15 to 0.5 V at 15 mA and off-state leakage of 10 nA max at 15 V (VCC = 15 V)."       },       {         "number": "2",-        "name": "THRESHOLD1",+        "name": "Threshold",         "type": "input",-        "description": "Timer 1 threshold input. When VTHRES rises above 2/3 VCC the internal comparator resets the flip-flop and drives OUT low. Input current ~250 nA typ."+        "description": "Threshold comparator input of the first timer, with threshold voltage of 8.8 to 11.2 V at VCC = 15 V and threshold current of 250 nA max at 11.2 V."       },       {         "number": "3",-        "name": "CONTROL1",-        "type": "input",-        "description": "Timer 1 control voltage. Direct access to the 2/3 VCC comparator reference; typically bypassed to GND with 10 nF. VCONT ~10 V typ at VCC=15 V; ~3.3 V typ at VCC=5 V."+        "name": "Control Voltage",+        "type": "passive",+        "description": "Control voltage node of the first timer, specified at 8 to 11 V with VCC = 15 V and 2.6 to 4 V with VCC = 5 V."       },       {         "number": "4",-        "name": "RESET1",+        "name": "Reset",         "type": "input",-        "description": "Timer 1 active-low reset. When pulled below ~0.7 V the timer output is forced low and the discharge transistor turns on, regardless of TRIG/THRES. Tie to VCC when reset is not used."+        "description": "Active-low reset input of the first timer; a low level forces the output low and the discharge on, with reset current of up to 10 µA at VRESET = 0.4 V and VCC = 15 V."       },       {         "number": "5",-        "name": "OUTPUT1",+        "name": "Output",         "type": "output",-        "description": "Timer 1 push-pull output. Sources or sinks up to 200 mA. VOH ~12.0 V at IOH=-200 mA (VCC=15 V); VOL ~2.7 V at IOL=200 mA. Rise/fall ~100 ns with CL=15 pF."+        "description": "Output of the first timer, which can sink up to 200 mA (VOL 2.7 V max at IOL = 200 mA, VCC = 15 V) and gives VOH of 12.0 V min at IOH = -200 mA with VCC = 15 V."       },       {         "number": "6",-        "name": "TRIGGER1",+        "name": "Trigger",         "type": "input",-        "description": "Timer 1 active-low trigger input. When VTRIG falls below 1/3 VCC the flip-flop is set, driving OUT high and turning off the discharge transistor. Input current ~500 nA typ."+        "description": "Trigger input of the first timer, with trigger voltage of 4.5 to 5.6 V at VCC = 15 V and trigger current of 500 nA max at VTRIG = 0 V."       },       {         "number": "7",         "name": "GND",         "type": "power_in",-        "description": "Device ground, shared by both timers. 0 V reference."+        "description": "Ground reference shared by both timers and the supply."       },       {         "number": "8",-        "name": "TRIGGER2",+        "name": "Trigger",         "type": "input",-        "description": "Timer 2 active-low trigger input. When VTRIG falls below 1/3 VCC the flip-flop is set, driving OUT high and turning off the discharge transistor. Input current ~500 nA typ."+        "description": "Trigger input of the second timer, with trigger voltage of 4.5 to 5.6 V at VCC = 15 V and trigger current of 500 nA max at VTRIG = 0 V."       },       {         "number": "9",-        "name": "OUTPUT2",+        "name": "Output",         "type": "output",-        "description": "Timer 2 push-pull output. Sources or sinks up to 200 mA. VOH ~12.0 V at IOH=-200 mA (VCC=15 V); VOL ~2.7 V at IOL=200 mA."+        "description": "Output of the second timer, which can sink up to 200 mA (VOL 2.7 V max at IOL = 200 mA, VCC = 15 V) and gives VOH of 12.0 V min at IOH = -200 mA with VCC = 15 V."       },       {         "number": "10",-        "name": "RESET2",+        "name": "Reset",         "type": "input",-        "description": "Timer 2 active-low reset. When pulled below ~0.7 V the timer output is forced low and the discharge transistor turns on. Tie to VCC when reset is not used."+        "description": "Active-low reset input of the second timer; a low level forces the output low and the discharge on, with reset current of up to 10 µA at VRESET = 0.4 V and VCC = 15 V."       },       {         "number": "11",-        "name": "CONTROL2",-        "type": "input",-        "description": "Timer 2 control voltage. Direct access to the 2/3 VCC comparator reference; typically bypassed to GND with 10 nF."+        "name": "Control Voltage",+        "type": "passive",+        "description": "Control voltage node of the second timer, specified at 8 to 11 V with VCC = 15 V and 2.6 to 4 V with VCC = 5 V."       },       {         "number": "12",-        "name": "THRESHOLD2",+        "name": "Threshold",         "type": "input",-        "description": "Timer 2 threshold input. When VTHRES rises above 2/3 VCC the internal comparator resets the flip-flop and drives OUT low."+        "description": "Threshold comparator input of the second timer, with threshold voltage of 8.8 to 11.2 V at VCC = 15 V and threshold current of 250 nA max at 11.2 V."       },       {         "number": "13",-        "name": "DISCHARGE2",-        "type": "output",-        "description": "Timer 2 discharge pin. Open-collector NPN transistor to GND; used to discharge the external timing capacitor."+        "name": "Discharge",+        "type": "passive",+        "description": "Discharge pin of the second timer, which switches to ground when the output is low, with on-voltage VDISL of 0.15 to 0.5 V at 15 mA and off-state leakage of 10 nA max at 15 V (VCC = 15 V)."       },       {         "number": "14",         "name": "VCC",         "type": "power_in",-        "description": "Positive supply, shared by both timers. Operating range 4.5 V to 16 V; absolute maximum 18 V. ICC ~11 mA typ at VCC=15 V (output high)."+        "description": "Supply pin for both timers, with operating supply range of 4.5 to 16 V and absolute maximum of 18 V."       }     ],     "provenance": {-      "extractor": "ds2sf",+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-5-5",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: The pin table on page 1 is printed for both DIP14 and SOP14 together. The SOP14 outline drawing on p; The datasheet does not assign KiCad ERC classes. Types are my judgment: Discharge and Control Voltag; Pin descriptions are limits taken from the electrical characteristics table at TA = 25 °C. Several t"+        ],+        "pages_sent": 6,+        "cost_usd": 0.0517,+        "at": "2026-11-13T07:40:36"+      },       "datasheet": {-        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2309150924_GR-NE556_C18164404.pdf",+        "url": "https://datasheet.lcsc.com/datasheet/pdf/0870676f7ccdbc2e019811122a96a5d7.pdf",         "pages": 6,         "sha256": "c3f223235fefd260",         "source_tier": "lcsc"@@ -152,7 +183,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "3b9a775da256c8afcc28dcddfbc2eb3f266107fe61ce8446d96f2c52b6f44a70",-        "checked": "2026-10-07",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -170,8 +201,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "3e0cc080cd2c7cd2457071f9cbf80b6d554b4cd05edc529aced97c6803abe3a1",-        "checked": "2026-11-12",+        "sha256": "8a9b2ba5460bbd7d1fac8e619352a1b86c6fe55e66ab030ad4edfd50949c8d0b",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]@@ -216,11 +247,11 @@     "docs/ne556-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html",-    "ne556-etched.glb",-    "ne556-etched.step"+    "ne556-hero.glb",+    "ne556-hero.overlay.json"   ],   "visibility": "public",   "updated_at": "2026-09-25T03:10:46.173Z",-  "description": "GR Timers / Clock Oscillators, SOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "description": "GR Timers / Clock Oscillators, SOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "org": "adom" }\ No newline at end of file
viewers/footprint.html+1−65
@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>RAY/NE556 footprint</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>PCB footprint</span><span class=sp></span><button class="lyrtog on" data-lyr="copper"><span class="d" style="background:#e35d5d"></span>Copper</button><button class="lyrtog on" data-lyr="silk"><span class="d" style="background:#e6edf3"></span>Silkscreen</button><button class="lyrtog" data-lyr="fab"><span class="d" style="background:#8b949e"></span>Fab</button><button class="lyrtog" data-lyr="courtyard"><span class="d" style="background:#bc8cff"></span>Courtyard</button></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-4.100 -5.100 8.200 10.080' style='width:100%;height:100%'><line class='ly-silk' x1='-2.060' y1='-4.435' x2='2.060' y2='-4.435' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='-2.060' y1='-4.370' x2='-2.060' y2='-4.435' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='-2.060' y1='4.435' x2='-2.060' y2='4.370' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='2.060' y1='-4.435' x2='2.060' y2='-4.370' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='2.060' y1='4.370' x2='2.060' y2='4.435' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='2.060' y1='4.435' x2='-2.060' y2='4.435' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-courtyard' x1='-3.700' y1='-4.360' x2='-2.200' y2='-4.360' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-3.700' y1='4.360' x2='-3.700' y2='-4.360' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-2.200' y1='-4.580' x2='2.200' y2='-4.580' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-2.200' y1='-4.360' x2='-2.200' y2='-4.580' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-2.200' y1='4.360' x2='-3.700' y2='4.360' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-2.200' y1='4.580' x2='-2.200' y2='4.360' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='2.200' y1='-4.580' x2='2.200' y2='-4.360' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='2.200' y1='-4.360' x2='3.700' y2='-4.360' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='2.200' y1='4.360' x2='2.200' y2='4.580' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='2.200' y1='4.580' x2='-2.200' y2='4.580' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='3.700' y1='-4.360' x2='3.700' y2='4.360' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='3.700' y1='4.360' x2='2.200' y2='4.360' stroke='#4ade80' stroke-width='0.050'/><polygon class='ly-silk' points='-2.600,-4.370 -2.840,-4.700 -2.360,-4.700' fill='#d8b4fe' stroke='none'/><polygon class='ly-fab' points='-0.975,-4.325 1.950,-4.325 1.950,4.325 -1.950,4.325 -1.950,-3.350' fill='none' stroke='#f472b6' stroke-width='0.100'/><rect class='ly-copper pad' data-num='1' data-name='DISCH' x='-3.450' y='-4.110' width='1.950' height='0.600' rx='0.150' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-2.475' y='-3.810' font-size='0.360' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>1</text><rect class='ly-copper pad' data-num='2' data-name='THRES' x='-3.450' y='-2.840' width='1.950' height='0.600' rx='0.150' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-2.475' y='-2.540' font-size='0.360' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>2</text><rect class='ly-copper pad' data-num='3' data-name='CONT' x='-3.450' y='-1.570' width='1.950' height='0.600' rx='0.150' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-2.475' y='-1.270' font-size='0.360' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>3</text><rect class='ly-copper pad' data-num='4' data-name='~{RST}' x='-3.450' y='-0.300' width='1.950' height='0.600' rx='0.150' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-2.475' y='0.000' font-size='0.360' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>4</text><rect class='ly-copper pad' data-num='5' data-name='OUT' x='-3.450' y='0.970' width='1.950' height='0.600' rx='0.150' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-2.475' y='1.270' font-size='0.360' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>5</text><rect class='ly-copper pad' data-num='6' data-name='TRIG' x='-3.450' y='2.240' width='1.950' height='0.600' rx='0.150' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-2.475' y='2.540' font-size='0.360' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>6</text><rect class='ly-copper pad' data-num='7' data-name='GND' x='-3.450' y='3.510' width='1.950' height='0.600' rx='0.150' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-2.475' y='3.810' font-size='0.360' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>7</text><rect class='ly-copper pad' data-num='8' data-name='TRIG' x='1.500' y='3.510' width='1.950' height='0.600' rx='0.150' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='2.475' y='3.810' font-size='0.360' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>8</text><rect class='ly-copper pad' data-num='9' data-name='OUT' x='1.500' y='2.240' width='1.950' height='0.600' rx='0.150' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='2.475' y='2.540' font-size='0.360' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>9</text><rect class='ly-copper pad' data-num='10' data-name='~{RST}' x='1.500' y='0.970' width='1.950' height='0.600' rx='0.150' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='2.475' y='1.270' font-size='0.360' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>10</text><rect class='ly-copper pad' data-num='11' data-name='CONT' x='1.500' y='-0.300' width='1.950' height='0.600' rx='0.150' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='2.475' y='0.000' font-size='0.360' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>11</text><rect class='ly-copper pad' data-num='12' data-name='THRES' x='1.500' y='-1.570' width='1.950' height='0.600' rx='0.150' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='2.475' y='-1.270' font-size='0.360' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>12</text><rect class='ly-copper pad' data-num='13' data-name='DISCH' x='1.500' y='-2.840' width='1.950' height='0.600' rx='0.150' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='2.475' y='-2.540' font-size='0.360' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>13</text><rect class='ly-copper pad' data-num='14' data-name='VCC' x='1.500' y='-4.110' width='1.950' height='0.600' rx='0.150' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='2.475' y='-3.810' font-size='0.360' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>14</text></svg></div>-<div id=tip></div>-<script>-var KIND="footprint", MPN="RAY/NE556", PINS=[{"desc":"","name":"GND","number":"7","type":""},{"desc":"","name":"VCC","number":"14","type":""},{"desc":"","name":"DISCH","number":"1","type":""},{"desc":"","name":"THRES","number":"2","type":""},{"desc":"","name":"CONT","number":"3","type":""},{"desc":"","name":"~{RST}","number":"4","type":""},{"desc":"","name":"OUT","number":"5","type":""},{"desc":"","name":"TRIG","number":"6","type":""},{"desc":"","name":"TRIG","number":"8","type":""},{"desc":"","name":"OUT","number":"9","type":""},{"desc":"","name":"~{RST}","number":"10","type":""},{"desc":"","name":"CONT","number":"11","type":""},{"desc":"","name":"THRES","number":"12","type":""},{"desc":"","name":"DISCH","number":"13","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+'  '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){-  var n=g.getAttribute('data-num');-  g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});-  g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});-  g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){-  function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}-  apply(b.classList.contains('on'));-  b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>ne556</title>\ No newline at end of file
viewers/symbol.html+1−65
@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>RAY/NE556 symbol</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>Schematic symbol</span><span class=sp></span></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-450 -450 900 900' style='width:100%;height:100%'><rect x='-300.0' y='-300.0' width='600.0' height='600.0' fill='#e35d5d22' stroke='#e35d5d' stroke-width='4'/><g class='pingroup' data-num='7' data-name='GND'><line class='pinvis' x1='0.0' y1='400.0' x2='0.0' y2='300.0' stroke='#dfe4ec' stroke-width='4'/><line x1='0.0' y1='400.0' x2='0.0' y2='300.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='37.5' y='350.0' font-size='50' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>7</text><text x='0.0' y='275.0' font-size='50' fill='#e6e9ef' text-anchor='middle' dominant-baseline='central'>GND</text><g class='pingroup' data-num='14' data-name='VCC'><line class='pinvis' x1='100.0' y1='-400.0' x2='100.0' y2='-300.0' stroke='#dfe4ec' stroke-width='4'/><line x1='100.0' y1='-400.0' x2='100.0' y2='-300.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='62.5' y='-350.0' font-size='50' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>14</text><text x='100.0' y='-275.0' font-size='50' fill='#e6e9ef' text-anchor='middle' dominant-baseline='central'>VCC</text><g class='pingroup' data-num='1' data-name='DISCH'><line class='pinvis' x1='-400.0' y1='-100.0' x2='-300.0' y2='-100.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-400.0' y1='-100.0' x2='-300.0' y2='-100.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-350.0' y='-62.5' font-size='50' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>1</text><text x='-275.0' y='-100.0' font-size='50' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>DISCH</text><g class='pingroup' data-num='2' data-name='THRES'><line class='pinvis' x1='-400.0' y1='100.0' x2='-300.0' y2='100.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-400.0' y1='100.0' x2='-300.0' y2='100.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-350.0' y='137.5' font-size='50' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>2</text><text x='-275.0' y='100.0' font-size='50' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>THRES</text><g class='pingroup' data-num='3' data-name='CONT'><line class='pinvis' x1='0.0' y1='-400.0' x2='0.0' y2='-300.0' stroke='#dfe4ec' stroke-width='4'/><line x1='0.0' y1='-400.0' x2='0.0' y2='-300.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-37.5' y='-350.0' font-size='50' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>3</text><text x='0.0' y='-275.0' font-size='50' fill='#e6e9ef' text-anchor='middle' dominant-baseline='central'>CONT</text><g class='pingroup' data-num='4' data-name='~{RST}'><line class='pinvis' x1='-400.0' y1='-200.0' x2='-300.0' y2='-200.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-400.0' y1='-200.0' x2='-300.0' y2='-200.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-350.0' y='-162.5' font-size='50' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>4</text><text x='-275.0' y='-200.0' font-size='50' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>~{RST}</text><g class='pingroup' data-num='5' data-name='OUT'><line class='pinvis' x1='400.0' y1='-0.0' x2='300.0' y2='-0.0' stroke='#dfe4ec' stroke-width='4'/><line x1='400.0' y1='-0.0' x2='300.0' y2='-0.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='350.0' y='-37.5' font-size='50' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>5</text><text x='275.0' y='0.0' font-size='50' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>OUT</text><g class='pingroup' data-num='6' data-name='TRIG'><line class='pinvis' x1='-400.0' y1='200.0' x2='-300.0' y2='200.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-400.0' y1='200.0' x2='-300.0' y2='200.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-350.0' y='237.5' font-size='50' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>6</text><text x='-275.0' y='200.0' font-size='50' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>TRIG</text><g class='pingroup' data-num='8' data-name='TRIG'><line class='pinvis' x1='-400.0' y1='200.0' x2='-300.0' y2='200.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-400.0' y1='200.0' x2='-300.0' y2='200.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-350.0' y='237.5' font-size='50' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>8</text><text x='-275.0' y='200.0' font-size='50' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>TRIG</text><g class='pingroup' data-num='9' data-name='OUT'><line class='pinvis' x1='400.0' y1='-0.0' x2='300.0' y2='-0.0' stroke='#dfe4ec' stroke-width='4'/><line x1='400.0' y1='-0.0' x2='300.0' y2='-0.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='350.0' y='-37.5' font-size='50' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>9</text><text x='275.0' y='0.0' font-size='50' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>OUT</text><g class='pingroup' data-num='10' data-name='~{RST}'><line class='pinvis' x1='-400.0' y1='-200.0' x2='-300.0' y2='-200.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-400.0' y1='-200.0' x2='-300.0' y2='-200.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-350.0' y='-162.5' font-size='50' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>10</text><text x='-275.0' y='-200.0' font-size='50' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>~{RST}</text><g class='pingroup' data-num='11' data-name='CONT'><line class='pinvis' x1='0.0' y1='-400.0' x2='0.0' y2='-300.0' stroke='#dfe4ec' stroke-width='4'/><line x1='0.0' y1='-400.0' x2='0.0' y2='-300.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-37.5' y='-350.0' font-size='50' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>11</text><text x='0.0' y='-275.0' font-size='50' fill='#e6e9ef' text-anchor='middle' dominant-baseline='central'>CONT</text><g class='pingroup' data-num='12' data-name='THRES'><line class='pinvis' x1='-400.0' y1='100.0' x2='-300.0' y2='100.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-400.0' y1='100.0' x2='-300.0' y2='100.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-350.0' y='137.5' font-size='50' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>12</text><text x='-275.0' y='100.0' font-size='50' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>THRES</text><g class='pingroup' data-num='13' data-name='DISCH'><line class='pinvis' x1='-400.0' y1='-100.0' x2='-300.0' y2='-100.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-400.0' y1='-100.0' x2='-300.0' y2='-100.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-350.0' y='-62.5' font-size='50' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>13</text><text x='-275.0' y='-100.0' font-size='50' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>DISCH</text></svg></div>-<div id=tip></div>-<script>-var KIND="symbol", MPN="RAY/NE556", PINS=[{"desc":"","name":"GND","number":"7","type":""},{"desc":"","name":"VCC","number":"14","type":""},{"desc":"","name":"DISCH","number":"1","type":""},{"desc":"","name":"THRES","number":"2","type":""},{"desc":"","name":"CONT","number":"3","type":""},{"desc":"","name":"~{RST}","number":"4","type":""},{"desc":"","name":"OUT","number":"5","type":""},{"desc":"","name":"TRIG","number":"6","type":""},{"desc":"","name":"TRIG","number":"8","type":""},{"desc":"","name":"OUT","number":"9","type":""},{"desc":"","name":"~{RST}","number":"10","type":""},{"desc":"","name":"CONT","number":"11","type":""},{"desc":"","name":"THRES","number":"12","type":""},{"desc":"","name":"DISCH","number":"13","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+'  '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){-  var n=g.getAttribute('data-num');-  g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});-  g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});-  g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){-  function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}-  apply(b.classList.contains('on'));-  b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>ne556</title>\ No newline at end of file