component
NE5534P
Public Made by Adomby adom
Texas Instruments Operational Amplifier, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownNE5534P
Texas Instruments · Operational Amplifier · PDIP-8
NE5534P from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BALANCE | input | External balance input for input offset voltage adjustment using external resistor network. |
| 2 | IN- | input | Inverting input rated for voltage between VCC- and VCC+. |
| 3 | IN+ | input | Noninverting input rated for voltage between VCC- and VCC+. |
| 4 | VCC- | power_in | Negative supply voltage, -15 to -5 V operating range with -22 to 0 V absolute maximum. |
| 5 | COMP | output | Compensation output for external offset voltage adjustment circuit. |
| 6 | OUT | output | Amplifier output with 38 mA maximum continuous short-circuit current capability. |
| 7 | VCC+ | power_in | Positive supply voltage, +5 to +15 V operating range with 0 to +22 V absolute maximum. |
| 8 | COMP/BAL | input | External compensation/balance pin for frequency compensation and offset nulling, typically connected to 22-47 pF capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
NE5534P - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
ne5534p-etched.step/ne5534p-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ne5534p.step/ne5534p.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (27 pp, sha256
8df0a04b9b16637a, retrieved 2026-09-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).