Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NE5534DR

Texas Instruments · Operational Amplifier · SOIC-8

NE5534DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BALANCE input External offset-nulling / frequency-compensation pin. Connect a trim network (typically a potentiometer between BALANCE and COMP/BAL with wiper to VCC-) to null the input offset voltage.
2 IN- input Inverting input of the op-amp. Input voltage must remain between VCC- and VCC+; differential input voltage above ~0.6 V causes excessive input current unless externally limited.
3 IN+ input Non-inverting input of the op-amp. Common-mode input voltage range is ±12 V (typ ±13 V) with ±15 V supplies.
4 VCC- power_in Negative supply rail. Recommended operating range -5 V to -15 V; absolute maximum -22 V. All voltages are referenced to the midpoint between VCC+ and VCC-.
5 COMP output External frequency-compensation node. Connect a compensation capacitor (typ 22 pF) between COMP and COMP/BAL for stable operation at closed-loop gains below three; may be left open for gains ≥3.
6 OUT output Op-amp output. Delivers ±13 V peak-to-peak swing into a 600 Ω load at ±15 V supplies (typ 26 V PP; 32 V PP at ±18 V). Short-circuit protected with ~38 mA typical output-short-circuit current.
7 VCC+ power_in Positive supply rail. Recommended operating range +5 V to +15 V; absolute maximum +22 V. Total supply current is typically 4 mA (max 8 mA).
8 COMP/BAL input Combined external offset-voltage adjustment and external frequency-compensation node. Compensation capacitor is tied between this pin and COMP (pin 5); offset-nulling potentiometer is connected between this pin and BALANCE (pin 1) with wiper to VCC-.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • NE5534DRD
  • NE5534DR
  • NE5534DRP
  • NE5534DRPS

CAD (KiCad official)

  • Symbol: NE5534DR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ne5534dr-etched.step / ne5534dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ne5534dr.step / ne5534dr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (27 pp, sha256 8df0a04b9b16637a, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF