component

NE5534 Low-Noise Op-Amp

Public Made by Adom

by adom

Single low-noise, high-slew-rate operational amplifier for audio and professional signal paths.

op-amplow-noiseaudiosingletisoic-8
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

Datasheet

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

NE5534

Texas Instruments · Operational Amplifier · SOIC-8

The NE5534 is a single high-performance operational amplifier with low input noise voltage, high slew rate, and wide bandwidth. It has long been a standard in professional audio for microphone preamplifiers, mixing consoles, and active filters where low noise and clean drive into low-impedance loads are needed.

Pinout

Pin Name Type Function
1 BALANCE passive External frequency-compensation / offset-null connection. Together with COMP/BAL (pin 8), used with an external potentiometer to null the input offset voltage.
2 IN- input Inverting input of the op-amp. Common-mode input-voltage range ±12 V typ at V_CC± = ±15 V; input bias current 500 nA typ, 1500 nA max at 25°C.
3 IN+ input Noninverting input of the op-amp. Common-mode input-voltage range ±12 V typ at V_CC± = ±15 V; input bias current 500 nA typ, 1500 nA max at 25°C.
4 VCC- power_in Negative supply rail. Recommended operating range -5 V to -15 V; absolute maximum -22 V. Typically ±15 V split-supply operation.
5 COMP passive External frequency-compensation pin. An external capacitor (typically 22 pF) between COMP and COMP/BAL sets the frequency response for gains below three; C_C = 0 for closed-loop gain ≥3.
6 OUT output Amplifier output. Short-circuit protected (I_OS ≈ 38 mA typ); peak-to-peak output-voltage swing 32 V typ into R_L = 600 Ω at V_CC± = ±18 V; slew rate 13 V/µs typ (C_C = 0).
7 VCC+ power_in Positive supply rail. Recommended operating range 5 V to 15 V; absolute maximum 22 V. Total supply current 4 mA typ, 8 mA max (no load).
8 COMP/BAL passive Combined external frequency-compensation and offset-null pin. Connects to the second terminal of the compensation capacitor (to pin 5, COMP) and to the wiper/end of the balance potentiometer used with BALANCE (pin 1).

Key specifications

Parameter Value
Type Single low-noise op-amp
Input noise voltage 3.5 nV/sqrt(Hz) typ at 1 kHz
Slew rate 13 V/us typ
Gain-bandwidth product 10 MHz typ
Supply voltage +-3 V to +-20 V
Input offset voltage 0.5 mV typ
Operating temperature 0 C to 70 C

Ordering variants

Same part, different packaging or reel option.

  • NE5534D
  • NE5534P
  • NE5534PS

CAD (KiCad official)

  • Symbol: ne5534.kicad_sym
  • Footprint: ne5534.kicad_mod
  • 3D model: SOIC-8 body from KiCad Package_SO/SOIC-8_3.9x4.9mm_P1.27mm.
  • 3D model files: ne5534-etched.step / ne5534-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ne5534.step / ne5534.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (27 pp, sha256 8df0a04b9b16637a, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF