main
Ray
Publish 0.1.0
fdb089e
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240
{
"slug": "ndp3811kc",
"version": "0.1.0",
"type": "component",
"description": "NDP LED Drivers, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"nixie tube driver-led driver",
"ndp3811kc",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ndp3811kc.kicad_sym",
"ndp3811kc.kicad_mod",
"ndp3811kc.glb",
"ndp3811kc.step",
"ndp3811kc.lbr",
"docs/hero.png",
"docs/ndp3811kc-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ndp3811kc-hero.glb",
"ndp3811kc-hero.overlay.json",
"ndp3811kc-etched.glb"
],
"component": {
"mpn": "NDP3811KC",
"manufacturer": "NDP",
"package": "SOP-8",
"pin_count": 8,
"category": "Nixie Tube Driver/LED Driver",
"subcategory": "LED Drivers",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/4302320fc6df33c9e3c45dbba20dc89b.pdf",
"parts": {
"symbol": "ndp3811kc.kicad_sym",
"footprint": "ndp3811kc.kicad_mod",
"model_3d": "ndp3811kc-hero.glb",
"model_3d_plain": "ndp3811kc-etched.glb",
"model_3d_step": "ndp3811kc-etched.step",
"model_3d_step_plain": "ndp3811kc.step",
"lbr": "ndp3811kc.lbr"
},
"distributor_links": {
"lcsc": "C20415506"
},
"distributor_check": {
"checked_at": "2026-10-28T23:24:27Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"pins": [
{
"number": "1",
"name": "VIN",
"type": "power_in",
"description": "Power input for the step-down LED driver, with a supply range of 7 V to 100 V and an absolute maximum VIN-to-GND rating of -0.3 to 105 V."
},
{
"number": "2",
"name": "DIM",
"type": "input",
"description": "PWM and analog dimming input: the chip turns off below 0.1 V, LED current scales from 0% to 100% between 0.1 V and 1.5 V, PWM signal amplitude must exceed 1.5 V, the pin must not be left floating, and the absolute maximum rating is -0.3 to 7 V."
},
{
"number": "3",
"name": "VDD",
"type": "power_out",
"description": "Internal power supply pin (called VCC in the electrical characteristics), with a VCC UVLO threshold of 6.5 V rising and 0.4 V hysteresis, a VCC of 5.7 V to 6.5 V with DIM = 3.5 V, and an absolute maximum VCC-to-GND rating of -0.3 to +7 V."
},
{
"number": "4",
"name": "CS",
"type": "input",
"description": "Current-sense input connected to a sense resistor to GND to measure the FET current, regulating the average sense voltage at 280 mV (270 mV to 290 mV) with an absolute maximum CS-to-GND rating of 0.3 to +7 V as printed."
},
{
"number": "5",
"name": "SW",
"type": "output",
"description": "Power switch node (MOSFET drain/switch output) with a 100 V MOSFET breakdown voltage (BVDSS) and 420 mΩ maximum-listed on-resistance (RDSON) as stated in the electrical characteristics."
},
{
"number": "6",
"name": "SW",
"type": "output",
"description": "Power switch node, listed in the pin table together with pin 5 as '5.6 SW Power switch', sharing the same 100 V BVDSS and 420 mΩ RDSON ratings."
},
{
"number": "7",
"name": "RT",
"type": "passive",
"description": "Off-time setting pin: connect a resistor to GND, with 100 kΩ to 300 kΩ recommended for most applications, and an absolute maximum RT-to-GND rating of -0.3 to +7 V."
},
{
"number": "8",
"name": "GND",
"type": "power_in",
"description": "Ground reference for the device, including the CS sense resistor and RT resistor connections."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The datasheet pin table prints a single merged entry '5.6 SW Power switch'. The package is 8-lead, s; The pin table names this pin VDD, but the electrical characteristics and absolute maximum ratings us; The CS absolute maximum rating is printed as '0.3 to +7 V' without a minus sign. It was reproduced a"
],
"pages_sent": 6,
"cost_usd": 0.0281,
"at": "2026-10-28T23:24:11"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/4302320fc6df33c9e3c45dbba20dc89b.pdf",
"pages": 6,
"sha256": "523d1b0694490971",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 8,
"described": 8,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ndp3811kc.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
4.9,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ndp3811kc-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
4.9,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "19704f8306b33a98564aa05a9101dd62d1e531f807eee4c7f7f2686bab57c7dd",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "SOP-8",
"source_page": 6,
"D": {
"nom_mm": 4.925,
"range_mm": [
4.7,
5.15
]
},
"E1": {
"nom_mm": 3.9,
"range_mm": [
3.8,
4.0
]
},
"E": {
"nom_mm": 6.0,
"range_mm": [
5.8,
6.2
]
},
"e": {
"nom_mm": 1.27,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.55,
"range_mm": [
1.35,
1.75
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "ndp3811kc.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}