main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ndp3810kc: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ndp3810kc: viewers · Ray
ndp3810kc-etched.fit.json ndp3810kc: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ndp3810kc-etched.glb ndp3810kc: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ndp3810kc-etched.step ndp3810kc: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ndp3810kc.glb Publish 0.1.0 · Ray
ndp3810kc.kicad_mod Publish 0.1.0 · Ray
ndp3810kc.kicad_sym Publish 0.1.0 · Ray
ndp3810kc.lbr Publish 0.1.0 · Ray
ndp3810kc.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json ndp3810kc: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md ndp3810kc: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

NDP3810KC

NDP · LED Drivers · SOP-8

NDP3810KC from NDP, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Power input. Wide operating range 7V to 100V (absolute max VIN to GND -0.3V to 105V). Supplies the internal UVLO/regulator; decouple close to pin (e.g. 47uF).
2 DIM input PWM/Analog dimming input. VDIM < 0.1V turns the chip off; 0.1V-1.5V gives analog dimming (0-100% ILED); >1.5V gives full current. For PWM dimming amplitude must exceed 1.5V; recommended frequency 0.1-20 kHz. Do not leave floating (no internal pull-up/down).
3 VDD power_out Internal regulator output / internal power supply rail (typ 5.7V, max 6.5V). Bypass to GND with a small ceramic (e.g. 1uF). Not intended to power external loads.
4 CS input Current-sense input. Connect the sense resistor from CS to GND to measure MOSFET/LED current; internal regulation target is VCS ~280mV (270-290mV). RSENSE = 280mV / ILED. Absolute max 0.3V to +7V.
5 SW output Power switch node - drain of the internal high-voltage NMOS (BVDSS 100V, RDSON ~420mΩ). Tie to inductor/Schottky in the step-down stage. Pins 5 and 6 are internally the same SW node.
6 SW output Power switch node - drain of the internal high-voltage NMOS. Pins 5 and 6 are internally the same SW node; parallel them for current handling and thermal spreading.
7 RT input NMOS off-time setting. Connect a resistor from RT to GND to program the constant off-time and thus the switching frequency; recommended 100kΩ-300kΩ for a typical 100kHz-300kHz. Absolute max -0.3V to +7V.
8 GND power_in Device ground / return for internal reference, regulator, and current-sense comparator. Reference for VIN, VDD, DIM, RT, and CS.

Key specifications

Parameter Value
Manufacturer NDP
Package SOP-8
Category LED-drv
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • NDP3810KC

CAD (KiCad official)

  • Symbol: NDP3810KC
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: ndp3810kc-etched.step / ndp3810kc-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ndp3810kc.step / ndp3810kc.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
ndp3810kc.step 122 KB You want the bare part, or you mark your own boards.
ndp3810kc-etched.step 2.0 MB You want the part with NDP3810KC already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 498 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NDP datasheet (6 pp, sha256 9401aaaa92be0c77, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF