Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NDP2450KC

NDP · DC-DC Converters · SOP-8

NDP2450KC from NDP, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VFB input Feedback input for the output voltage, with the FB to GND absolute maximum rated at -0.3 to 6 V and an internal reference of 1.0 V.
2 NC unconnected No internal connection; the pin is not connected to the die.
3 EN input Enable input with an internal pull-up; EN to GND absolute maximum is -0.3 to 6 V, with enable-on at 1.5 V rising and enable-off at 0.6 V falling.
4 VIN power_in Power input; VIN to GND absolute maximum is -0.3 to 44 V, with a recommended input range of 7 to 24 V.
5 SW output Switching node connected to the inductor; SW to GND is rated -0.3 to VIN+0.3 V.
6 SW output Switching node connected to the inductor; SW to GND is rated -0.3 to VIN+0.3 V.
7 GND power_in Ground reference for the device.
8 GND power_in Ground reference for the device.

Key specifications

Parameter Value
Manufacturer NDP
Package SOP-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage VIN 5.5 40 V 4
Input Voltage (VIN) VIN 7 24 V 3
Output Voltage (VOUT) VOUT 3.3 20 V 3
Output Current (IOUT) IOUT 5 A 3
VIN to GND -0.3 44 V 3
SW to GND -0.3 V upper limit printed as VIN+0.3 3
FB, EN to GND -0.3 6 V 3
Operating Junction Temperature TA -40 150 °C 3
Storage Junction Temperature Tstg -65 150 °C 3
FB Reference Voltage VREF 0.98 1 1.02 V 4
UVLO OFF Voltage VUVLO_OFF 5.5 V VIN Rising 4
UVLO ON Voltage VUVLO_ON 4.3 V VIN Falling 4
Quiescent Current ICCQ 1.3 mA VFB = 1.2V, No Switch 4
Standby Current ISB 1.7 2.2 mA No Load 4
VFB Bias Current IFB 0.2 μA 4
Enable On Voltage VEN_H 1.5 V VEN Rising 4
Enable Off Voltage VEN_L 0.6 V VEN Falling 4
Switching Frequency FSW 300 kHz 4
Maximum Duty Cycle 100 % 4
Current Limit ILIMIT 6 A 4
Hiccup Interval THICCUP 500 mS 4
Soft Start Time TSS 2 mS 4
RDSON of Power MOSFET (high side) RDSON_H 45 mΩ Temperature=25℃ 4
RDSON of Power MOSFET (low side) RDSON_L 23 mΩ Temperature=25℃ 4
Thermal Regulation TTR 150 °C 4
Thermal shutdown Temperature TSD 165 °C 4
Thermal Shutdown Hysteresis Temperature TSH 20 °C 4
Thermal Resistance from Junction to case θJC 45 °C/W 3
Thermal Resistance from Junction to ambient θJA 90 °C/W 3

CAD (KiCad official)

  • Symbol: NDP2450KC
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: ndp2450kc-etched.step / ndp2450kc-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ndp2450kc.step / ndp2450kc.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NDP datasheet (11 pp, sha256 3aabc005b3f52d71, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF