main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ndp23501kc: viewers · Ray
ndp23501kc-etched.glb Publish 0.1.0 · Ray
ndp23501kc-etched.step ndp23501kc: factory component page (tier=lcsc) · Ray
ndp23501kc-hero.glb ndp23501kc: hero GLB from the etched model (keeps the MPN mark) · Ray
ndp23501kc-hero.overlay.json Publish 0.1.0 · Ray
ndp23501kc.glb Publish 0.1.0 · Ray
ndp23501kc.kicad_mod Publish 0.1.0 · Ray
ndp23501kc.kicad_sym Publish 0.1.0 · Ray
ndp23501kc.lbr Publish 0.1.0 · Ray
ndp23501kc.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

NDP23501KC

NDP · DC-DC Converters · SOP-8

NDP23501KC from NDP, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FB input Feedback input for the output voltage, regulated against the internal 1.0V reference (FB reference 0.98V to 1.02V).
2 RT input Switching frequency configuration pin: connect to GND for 235kHz operation or leave floating for 370kHz operation.
3 EN input Enable input with internal pull-up; enable-on voltage is 0.9V to 1.3V rising and enable-off voltage is 0.3V to 0.8V falling.
4 VIN power_in Power input with an operating range of 4.6V to 30V (absolute maximum VIN to GND is -0.3V to 34V).
5 SW output Switching node connected to the inductor; absolute maximum SW to GND is -0.3V to VIN+0.3V.
6 SW output Switching node connected to the inductor; absolute maximum SW to GND is -0.3V to VIN+0.3V.
7 GND power_in Ground reference for the device.
8 GND power_in Ground reference for the device.

Key specifications

Parameter Value
Manufacturer NDP
Package SOP-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage (absolute maximum, VIN to GND) VIN -0.3 34 V VIN to GND 3
FB, RT, EN to GND FB, RT, EN -0.3 6.5 V FB, RT, EN to GND 3
SW to GND SW -0.3 V SW to GND, printed as VIN+0.3 3
Operating Junction Temperature TA -40 150 °C 3
Storage Junction Temperature Tstg -65 150 °C 3
Input Voltage (recommended) VIN 5 24 V 3
Output Voltage (recommended) VOUT 3.3 20 V 3
Output Current (recommended) IOUT 5 A 3
Thermal Resistance from Junction to case θJC 45 °C/W 3
Thermal Resistance from Junction to ambient θJA 90 °C/W 3
Input Voltage VIN 4.6 30 V 4
UVLO OFF Voltage VUVLO_OFF 4.1 4.4 4.6 V VIN Rising 4
UVLO ON Voltage VUVLO_ON 3.2 3.6 4 V VIN Falling 4
Quiescent Current ICCQ 300 μA VFB = 1.2V, No Switch 4
Standby Current ISB 400 μA No Load 4
Shut Down Current ISD 80 μA VIN=12V,VEN=0V 4
FB Reference Voltage VREF 0.98 1 1.02 V 4
EN Internal Pull Up Voltage VEN 2.55 V EN Floating 4
EN Internal Pull Up Current IEN 10 μA 4
Enable On Voltage VEN_H 0.9 1.1 1.3 V VEN Rising 4
Enable Off Voltage VEN_L 0.3 0.6 0.8 V VEN Falling 4
Switching Frequency FSW 330 370 410 kHz RT Floating 4
Switching Frequency FSW 210 235 260 kHz RT Connect to GND 4
Maximum Duty Cycle 100 % 4
Current Limit ILIMIT 6.5 A 4
Hiccup Interval THICCUP 450 ms FS Floating 4
Soft Start Time TSS 2 ms 4
RDSON of High Side Power MOSFET RDSON_H 47 mΩ Temperature=25℃ 4
RDSON of Low Side Power MOSFET RDSON_L 26 mΩ Temperature=25℃ 4
Thermal shutdown Temperature TSD 150 °C 4
Thermal Shutdown Hysteresis Temperature TSH 20 °C 4

CAD (KiCad official)

  • Symbol: NDP23501KC
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: ndp23501kc-etched.step / ndp23501kc-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ndp23501kc.step / ndp23501kc.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NDP datasheet (14 pp, sha256 b0c165c0ba0a25b6, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus off (skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF