Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NDP1450KC

NDP · DC-DC Converters · SOP-8

NDP1450KC from NDP, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FB input Feedback input for the output voltage divider; the internal reference is 1.0 V (VREF 0.985 V to 1.015 V), and FB to GND is rated -0.3 V to 6 V.
2 CSP input Positive pole of the current sense; the CSP-to-CSN current-sense voltage is 51 mV to 59 mV, and CSP to GND is rated -0.3 V to 25 V.
3 CSN1 input Negative pole 1 of current sense 1; the CSP-to-CSN1 sense voltage is 51 mV to 59 mV, and CSN1 to GND is rated -0.3 V to 25 V.
4 CSN2 input Negative pole 1 of current sense 2 (labelled 'Current Sense2' in the datasheet); the CSP-to-CSN2 sense voltage is 51 mV to 59 mV, and CSN2 to GND is rated -0.3 V to 25 V.
5 GND power_in Ground reference for the device.
6 VIN power_in Power input; the operating input range is 7 V to 37 V, and VIN to GND is rated -0.3 V to 44 V.
7 BST passive Boot strap pin for the high-side driver; BST to GND is rated -0.3 V to VIN+7 V.
8 SW output Switching node connected to the inductor; SW to GND is rated -0.3 V to VIN+0.3 V.

Key specifications

Parameter Value
Manufacturer NDP
Package SOP-8
Category Power Management (PMIC)
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage VIN 7 37 V 4
UVLO Voltage VUVLO 6.8 7 V 4
FB Reference Voltage VREF 0.985 1 1.015 V 4
Current Sense AMP VCS1 51 55 59 mV CSP-CSN1 4
Switching Frequency FSW 110 130 150 kHz 4
Standby Current ISB 1.7 2.2 mA No Load 4
Input Voltage (VIN) VIN 8 36 V 3
Output Voltage (VOUT) VOUT 3.3 20 V 3
VIN to GND VIN -0.3 44 V 3
SW to GND SW -0.3 V 3
BST to GND BST -0.3 V 3
FB to GND FB -0.3 6 V 3
CSP, CSN1, CSN2 to GND CSP, CSN1, CSN2 -0.3 25 V 3
Operating Junction Temperature TA -40 150 °C 3
Storage Junction Temperature Tstg -65 150 °C 3
UVLO Hysteresis 0.6 V 4
Input Over Voltage Protect VOVP 38 V 4
Quiescent Current ICCQ 1300 μA No Switch 4
FB Bias Current IFB 0.2 μA 4
Maximum Duty Cycle 98 % 4
Minimum On-Time 250 ns 4
Current Limit ILIMIT 7 A 4
VOUT Short Protect VSCP 3 V 4
Hiccup Interval THICCUP 400 ms 4
Soft Start Time TSS 2 ms 4
RDSON of Power MOSFET (high side) RDSON_H 14 mΩ Temperature=25℃ 4
RDSON of Power MOSFET (low side) RDSON_L 14 mΩ Temperature=25℃ 4
Thermal Regulation Temperature TTR 145 °C 4
Thermal shutdown Temperature TSD 165 °C 4
Thermal Shutdown Hysteresis Temperature TSH 30 °C 4
Output Current IOUT 4 A 3
Maximum Duty Cycle DMAX 95 % 3
Thermal Resistance from Junction to case θJC 45 °C/W 3
Thermal Resistance from Junction to ambient θJA 90 °C/W 3

CAD (KiCad official)

  • Symbol: NDP1450KC
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: ndp1450kc-etched.step / ndp1450kc-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ndp1450kc.step / ndp1450kc.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NDP datasheet (14 pp, sha256 6b36efd589facd21, retrieved 2026-10-17, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF