main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ndp1415qf: viewers · Ray
ndp1415qf-etched.glb Publish 0.1.0 · Ray
ndp1415qf-etched.step ndp1415qf: factory component page (tier=lcsc) · Ray
ndp1415qf-hero.glb ndp1415qf: hero GLB from the etched model (keeps the MPN mark) · Ray
ndp1415qf-hero.overlay.json Publish 0.1.0 · Ray
ndp1415qf.glb Publish 0.1.0 · Ray
ndp1415qf.kicad_mod Publish 0.1.0 · Ray
ndp1415qf.kicad_sym Publish 0.1.0 · Ray
ndp1415qf.lbr Publish 0.1.0 · Ray
ndp1415qf.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 17 pins · Ray

NDP1415QF

NDP · DC-DC Controllers · QFN-16-EP(3x3)

NDP1415QF from NDP, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Positive power input; absolute maximum is -0.3 to 44 V to GND and the recommended input range is 8 to 36 V.
2 HG output High-side MOSFET driver output; absolute maximum is -0.3 to VIN+7.5 V to GND.
3 SW passive Switching node connected to the inductor; absolute maximum is -0.3 to VIN+0.3 V to GND.
4 BST power_out Bootstrap pin for the high-side driver; absolute maximum is -0.3 to VIN+7.5 V to GND.
5 LG output Low-side MOSFET driver output; absolute maximum is -0.3 to 7.5 V to GND.
6 NC unconnected Listed as No Connection in the pin function table.
7 NC unconnected Listed as No Connection in the pin function table.
8 FB input Output voltage feedback input compared with the internal 1 V reference (VREF 0.98 to 1.02 V); absolute maximum is -0.3 to 6.5 V to GND.
9 CSP input Positive pole of the current sense; absolute maximum is -0.3 to 40 V to GND and CSP-CSN voltage is 51 to 59 mV.
10 CSN1 input Negative pole 1 of the current sense; absolute maximum is -0.3 to 40 V to GND.
11 CSN2 input Negative pole 2 of the current sense; absolute maximum is -0.3 to 40 V to GND.
12 FS/EN input Connect a resistor to GND to set frequency (floating gives 130 kHz, 150 to 500 kΩ gives 260 kHz) or use as enable with internal pull-up; absolute maximum is -0.3 to 6.5 V to GND.
13 NC unconnected Listed as No Connection in the pin function table.
14 NC unconnected Listed as No Connection in the pin function table.
15 NC unconnected Listed as No Connection in the pin function table.
16 GND power_in Ground; the pin table lists pin 16 and the E-PAD together as GND.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer NDP
Package QFN-16-EP(3x3)
Category Power Supply Chip
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage VIN 7.5 37 V 4
UVLO OFF Voltage VUVLO_OFF 6.8 7.1 7.5 V VIN Rising 4
UVLO ON Voltage VUVLO_ON 6 6.5 6.8 V VIN Falling 4
VIN Overvoltage Protections VOVP 37 38 39 V 4
Quiescent Current ICCQ 1.3 mA VFB = 1.2V, No Switch 4
Standby Current ISB 1.7 2.2 mA No Load 4
FB Reference Voltage VREF 0.98 1 1.02 V 4
Current Sense AMP VCS1 51 55 59 mV CSP-CSN1 4
Switching Frequency FSW 110 130 150 kHz FS Floating 4
Switching Frequency FSW 220 260 300 kHz R_FS=200kΩ 4
Enable On Voltage VEN_ON 0.68 0.7 1.5 V VEN Rising 4
Enable Off Voltage VEN_OFF 0.3 0.62 0.65 V VEN Falling 4
Minimum On-Time 250 ns 4
Thermal Shutdown Temperature TSD 160 °C 4
Thermal Shutdown Hysteresis Temperature TSH 30 °C 4
Input Voltage (VIN) VIN 8 36 V 3
Output Voltage (VOUT) VOUT 3.3 28 V 3
VIN to GND VIN -0.3 44 V 3
SW to GND SW -0.3 V Rated VIN+0.3 3
HG, BST to GND HG, BST -0.3 V Rated VIN+7.5 3
LG to GND LG -0.3 7.5 V 3
FB, FS/EN to GND FB, FS/EN -0.3 6.5 V 3
CSP, CSN1, CSN2 to GND CSP, CSN1, CSN2 -0.3 40 V 3
Operating Junction Temperature TA -40 150 °C 3
Storage Junction Temperature Tstg -65 150 °C 3
Thermal Resistance from Junction to case θJC 45 °C/W 3
Thermal Resistance from Junction to ambient θJA 70 °C/W 3

CAD (KiCad official)

  • Symbol: NDP1415QF
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: ndp1415qf-etched.step / ndp1415qf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ndp1415qf.step / ndp1415qf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NDP datasheet (15 pp, sha256 65ebaf0208c3c1cd, retrieved 2026-11-04, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF