component

NDP13802QB

Public Made by Adom

by adom

NDP DC-DC Converters, QFN-20-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentpower management (pmic)ndp13802qbfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Datasheet

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NDP13802QB

NDP · DC-DC Converters · QFN-20-EP(5x5)

NDP13802QB from NDP, in a QFN-20-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground pin of the converter, part of the GND exposed-pad group (PAD1) that must be connected to system ground.
2 GND power_in Ground pin of the converter, part of the GND exposed-pad group (PAD1) that must be connected to system ground.
3 GND power_in Ground pin of the converter, part of the GND exposed-pad group (PAD1) that must be connected to system ground.
4 NC unconnected No internal connection; the pin table lists it as NC, while the layout note says pins 4 and 5 may be connected to VIN or GND for easier layout.
5 NC unconnected No internal connection; the pin table lists it as NC, while the layout note says pins 4 and 5 may be connected to VIN or GND for easier layout.
6 VIN power_in Power input to the regulator, specified for 7.5 V to 30 V operation with an absolute maximum VIN to GND rating of -0.3 V to 33 V.
7 VIN power_in Power input to the regulator, specified for 7.5 V to 30 V operation with an absolute maximum VIN to GND rating of -0.3 V to 33 V.
8 VIN power_in Power input to the regulator, specified for 7.5 V to 30 V operation with an absolute maximum VIN to GND rating of -0.3 V to 33 V.
9 NC unconnected No internal connection.
10 BST power_out Boot-strap pin for the high-side gate drive; connect a 0 to 20 Ω resistor (4.7 Ω typical) and 100 nF from BST to SW, with an absolute maximum BST to GND rating of -0.3 V to VIN+7 V.
11 NC unconnected No internal connection.
12 SW output Switching node connected to the inductor, with an absolute maximum SW to GND rating of -0.3 V to VIN+0.3 V.
13 SW output Switching node connected to the inductor, with an absolute maximum SW to GND rating of -0.3 V to VIN+0.3 V.
14 SW output Switching node connected to the inductor, with an absolute maximum SW to GND rating of -0.3 V to VIN+0.3 V.
15 NC unconnected No internal connection.
16 FB input Feedback input from the output divider, referenced to a 1 V internal reference (0.985 V to 1.015 V), with an absolute maximum FB to GND rating of -0.3 V to 6.5 V.
17 CSP input Positive input of the current-sense amplifier, with an absolute maximum CSP to GND rating of -0.3 V to 25 V.
18 CSN1 input Negative input 1 of the current-sense amplifier, giving a CSP-CSN1 sense voltage of 51 to 59 mV, with an absolute maximum rating of -0.3 V to 25 V to GND.
19 CSN2 input Negative input 2 of the current-sense amplifier, giving a CSP-CSN2 sense voltage of 51 to 59 mV, with an absolute maximum rating of -0.3 V to 25 V to GND.
20 FS input Frequency-setting pin: leave floating for 130 kHz or connect a resistor to GND (75 kΩ gives 300 kHz), with an absolute maximum FS to GND rating of -0.3 V to 6.5 V.
21 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer NDP
Package QFN-20-EP(5x5)
Category Power Management (PMIC)
Pins 21

CAD (KiCad official)

  • Symbol: NDP13802QB
  • Footprint: Package_DFN_QFN:QFN-20-1EP_5x5mm_P0.65mm_EP3.35x3.35mm
  • 3D model: QFN-20-EP(5x5) (KiCad packages3D, STEP)
  • 3D model files: ndp13802qb-etched.step / ndp13802qb-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ndp13802qb.step / ndp13802qb.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NDP datasheet (15 pp, sha256 aa60be205308a6af, retrieved 2026-10-09, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF