main
History Download
Ray ndp1331kc: laser-etched CAD + chip hero (factory 2.0.0 backfill) 942a451

NDP1331KC

NDP · DC-DC Converters · SOP-8

NDP1331KC from NDP, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FB input Feedback input for output voltage regulation. Connect to a resistor divider from VOUT; internal reference is 1.0 V (VOUT = 1.0 V * (RFB_TOP + RFB_LOW)/RFB_LOW). Also used to program cable-drop compensation via divider impedance.
2 CSP input Positive input of the current-sense amplifier. Connect to the high side of the external current-sense resistor at the inductor/output node. Typical sense threshold CSP-CSN = 60 mV.
3 CSN input Negative input of the current-sense amplifier. Connect to the low side of the external current-sense resistor (output side). Together with CSP forms the average current-mode feedback path.
4 VIN power_in Power input pin. Operating range 7 V to 30 V (abs max 33 V); over-voltage protection engages at 32 V. Bypass with a low-ESR input capacitor (e.g. 100 µF / 35 V) placed close to the pin.
5 SW output Switching node, output of the integrated high-side (75 mΩ) and low-side (35 mΩ) power MOSFETs. Connect to the external inductor. Pins 5 and 6 are tied internally to the same SW node.
6 SW output Switching node (parallel with pin 5). Connect to the external inductor. Absolute maximum -0.3 V to VIN+0.3 V.
7 FS input Switching-frequency programming pin. Float for 130 kHz; connect an external resistor to GND to set frequency up to 300 kHz (e.g. 470 kΩ → 300 kHz, 1 MΩ → 220 kHz, 2 MΩ → 180 kHz). Pulling FS below 0.3 V puts the part into a low-current shutdown state.
8 GND power_in Device ground. Return for input capacitor, feedback divider, and FS resistor. Absolute maximum -0.3 V to 6.5 V on all non-power pins referenced to this node.

Key specifications

Parameter Value
Manufacturer NDP
Package SOP-8
Category PMIC
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • NDP1331KC

CAD (KiCad official)

  • Symbol: NDP1331KC
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: ndp1331kc-etched.step / ndp1331kc-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ndp1331kc.step / ndp1331kc.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NDP datasheet (10 pp, sha256 c27fa13c7af80c1c, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF