main
Ray
Publish 0.1.0
9f5db47
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344
{
"slug": "ncv97310mw33ar2g",
"version": "0.1.0",
"type": "component",
"description": "onsemi Power Management Specialized - PMIC, QFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management ics",
"ncv97310mw33ar2g",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ncv97310mw33ar2g.kicad_sym",
"ncv97310mw33ar2g.kicad_mod",
"ncv97310mw33ar2g.glb",
"ncv97310mw33ar2g.step",
"ncv97310mw33ar2g.lbr",
"docs/hero.png",
"docs/ncv97310mw33ar2g-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ncv97310mw33ar2g-hero.glb",
"ncv97310mw33ar2g-hero.overlay.json"
],
"component": {
"mpn": "NCV97310MW33AR2G",
"manufacturer": "onsemi",
"package": "QFN-32-EP(5x5)",
"pin_count": 33,
"category": "Power Management ICs",
"subcategory": "Power Management Specialized - PMIC",
"datasheet": "https://www.onsemi.com/pdf/datasheet/ncv97310mw33ar2-d.pdf",
"parts": {
"symbol": "ncv97310mw33ar2g.kicad_sym",
"footprint": "ncv97310mw33ar2g.kicad_mod",
"model_3d": "ncv97310mw33ar2g-hero.glb",
"model_3d_plain": "ncv97310mw33ar2g.glb",
"model_3d_step": "ncv97310mw33ar2g-etched.step",
"model_3d_step_plain": "ncv97310mw33ar2g.step",
"lbr": "ncv97310mw33ar2g.lbr"
},
"distributor_links": {
"lcsc": "C895786",
"digikey": "488-NCV97310MW33AR2GTR-ND",
"mouser": "863-NCV97310MW33AR2G"
},
"distributor_check": {
"checked_at": "2026-11-21T01:33:18Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "488-NCV97310MW33AR2GTR-ND",
"status": "found"
},
"mouser": {
"pn": "863-NCV97310MW33AR2G",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "VBAT",
"type": "power_in",
"description": "Battery input voltage that must be tied to pin 29 VINL, with an input filter capacitor placed close to the pin."
},
{
"number": "2",
"name": "EN",
"type": "input",
"description": "High-voltage TTL-compatible master enable; grounding this input stops all outputs and reduces Iq to a minimum (shutdown mode)."
},
{
"number": "3",
"name": "STBYB",
"type": "input",
"description": "High-voltage TTL-compatible mode select; grounding this input activates the low-Iq standby mode for switcher 1."
},
{
"number": "4",
"name": "RDEPTH",
"type": "passive",
"description": "Sets the modulation depth (% of FSW) for spread spectrum with a resistor to GND."
},
{
"number": "5",
"name": "RMOD",
"type": "passive",
"description": "Sets the modulation frequency for spread spectrum with a resistor to GND."
},
{
"number": "6",
"name": "RSTB1",
"type": "output",
"description": "Reset output with adjustable delay that goes low when the output is out of regulation; in Low-Iq LDO mode it needs a pull-up to a permanent external supply such as VOUT1."
},
{
"number": "7",
"name": "COMP1",
"type": "passive",
"description": "Output of the error amplifier for switcher 1."
},
{
"number": "8",
"name": "ROSC",
"type": "passive",
"description": "Provides frequency adjustment for the switching oscillator."
},
{
"number": "9",
"name": "ERRB",
"type": "output",
"description": "Error flag combining temperature, input voltage and output voltage sensing."
},
{
"number": "10",
"name": "EN2",
"type": "input",
"description": "TTL-compatible low-voltage input; grounding this input stops switcher 2."
},
{
"number": "11",
"name": "RSTB2",
"type": "output",
"description": "Reset output with adjustable delay that goes low when the switcher 2 output is out of regulation."
},
{
"number": "12",
"name": "GND1",
"type": "power_in",
"description": "Ground reference for the IC, which the exposed pad must also be connected to."
},
{
"number": "13",
"name": "RSTB3",
"type": "output",
"description": "Reset output with adjustable delay that goes low when the switcher 3 output is out of regulation."
},
{
"number": "14",
"name": "FB3",
"type": "input",
"description": "Output voltage sensing input for switcher 3 that provides output voltage adjustability."
},
{
"number": "15",
"name": "EN3",
"type": "input",
"description": "TTL-compatible low-voltage input; grounding this input stops switcher 3."
},
{
"number": "16",
"name": "BST3",
"type": "passive",
"description": "Bootstrap input that supplies high-side N-channel drive voltage above VIN3 for optimum RDS(on) and efficiency."
},
{
"number": "17",
"name": "GND3",
"type": "power_in",
"description": "Ground connection for the source of the switcher 3 low-side switch."
},
{
"number": "18",
"name": "SW3L",
"type": "passive",
"description": "Drain of the switcher 3 low-side switch that connects to the output inductor and must be tied to SW3H."
},
{
"number": "19",
"name": "SW3H",
"type": "passive",
"description": "Source of the switcher 3 high-side switch that connects to the output inductor and must be tied to SW3L."
},
{
"number": "20",
"name": "VDRV2",
"type": "passive",
"description": "Internal supply for driving the low-voltage internal switches, which needs a noise-filter capacitor."
},
{
"number": "21",
"name": "VIN3",
"type": "power_in",
"description": "Low input voltage for switcher 3 that must be tied to pin 22 VIN2 and pin 28 VOUT, with an input filter capacitor close to the pin."
},
{
"number": "22",
"name": "VIN2",
"type": "power_in",
"description": "Low input voltage for switcher 2 that must be tied to pin 21 VIN3 and pin 28 VOUT, with an input filter capacitor close to the pin."
},
{
"number": "23",
"name": "SW2",
"type": "passive",
"description": "Switching node of the switcher 2 regulator that connects to the output inductor."
},
{
"number": "24",
"name": "GND2",
"type": "power_in",
"description": "Ground connection for the source of the switcher 2 low-side switch."
},
{
"number": "25",
"name": "BST2",
"type": "passive",
"description": "Bootstrap input that supplies high-side N-channel drive voltage above VIN2 for optimum RDS(on) and efficiency."
},
{
"number": "26",
"name": "NC",
"type": "unconnected",
"description": "No-connect pin that must be left floating."
},
{
"number": "27",
"name": "FB2",
"type": "input",
"description": "Output voltage sensing input for switcher 2 that provides output voltage adjustability."
},
{
"number": "28",
"name": "VOUT",
"type": "power_out",
"description": "Output voltage sensing pin that delivers the output current in low-Iq mode and must be tied to VIN2 and VIN3."
},
{
"number": "29",
"name": "VINL",
"type": "power_in",
"description": "Battery input voltage that must be tied to pin 1 VBAT, with an input filter capacitor close to the pin."
},
{
"number": "30",
"name": "BST1",
"type": "passive",
"description": "Bootstrap input that supplies N-channel power switch drive voltage above VBAT for optimum Rdson and efficiency."
},
{
"number": "31",
"name": "VDRV1",
"type": "passive",
"description": "Internal supply for driving the low-voltage internal switch, which needs a noise-filter capacitor."
},
{
"number": "32",
"name": "SW1",
"type": "passive",
"description": "Switching node of the regulator that connects the output inductor and the freewheeling diode cathode."
},
{
"number": "33",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The exposed pad is not given a pin number in the datasheet text, so it is omitted from the pins list; Pin types are inferred from the Table 3 function descriptions, not stated in the datasheet. The MPN'"
],
"pages_sent": 8,
"cost_usd": 0.0252,
"at": "2026-11-21T01:33:05"
},
"datasheet": {
"url": "https://www.onsemi.com/pdf/datasheet/ncv97310mw33ar2-d.pdf",
"pages": 22,
"sha256": "9420d87c78af0491",
"source_tier": "mfr",
"citation": "onsemi datasheet"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 33,
"described": 33,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ncv97310mw33ar2g.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.0,
5.0,
0.875
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
"checked": "2026-11-21",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ncv97310mw33ar2g-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.0,
5.0,
0.875
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "6db16ea606f5784d3a9b14558b137a10286fdccb5c3ad083885c960f684d5336",
"checked": "2026-11-21",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}