main
Ray Publish 0.1.0 e3cb2d4

NCV887711D1R2G

onsemi · AC-DC Controllers & Regulators · SOIC-8

NCV887711D1R2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DISB input Disable input; the part is disabled when this pin is brought low (absolute maximum -0.3 to 6 V).
2 ISNS input Current sense input connected to the external N-MOSFET source through a current-sense resistor to ground, used to sense switching current for regulation and current limiting (absolute maximum -0.3 to 3.6 V).
3 GND power_in Ground reference.
4 GDRV output Gate driver output connecting to the gate of the external N-MOSFET, with an optional series resistance to tailor EMC performance (absolute maximum 12 V).
5 VDRV power_out Internally regulated gate-drive supply sourced from VOUT, to be bypassed with a 1.0 uF ceramic capacitor to ground (absolute maximum 12 V).
6 VOUT power_in Monitors the output voltage and provides the IC input voltage (DC absolute maximum -0.3 to 40 V, 45 V load dump).
7 VC output Output of the voltage error transconductance amplifier, with an external compensator network from VC to GND to stabilize the converter (absolute maximum -0.3 to 3.6 V).
8 ROSC passive Connect a resistor to ground to set the switching frequency (absolute maximum -0.3 to 3.6 V).

Key specifications

Parameter Value
Manufacturer onsemi
Package SOIC-8
Category Power Management
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Quiescent Current, Sleep Mode Iq,sleep 12 14 A VOUT = 13.2 V, TJ = 25°C, DISB = 0 V 4
Quiescent Current, No switching Iq,off 2.2 4 mA Into VOUT pin, VOUT,reg < VOUT < VOUT,des, No switching 4
Switching Frequency FSW 153 170 187 kHz ROSC = Open 4
Switching Frequency FSW 180 200 220 kHz ROSC = 100 k 4
Switching Frequency FSW 283 315 347 kHz ROSC = 20 k 4
Switching Frequency FSW 409 455 501 kHz ROSC = 10 k 4
Minimum Pulse Width ton,min 89 115 146 ns NCV887711 4
Maximum Duty Cycle Dmax 81 83 85 % ROSC = Open, NCV887711 4
Slope Compensating Ramp Sa 45 53 61 mV/µs NCV887711 4
DISB Pull-down Current IDIS 0.6 1 µA VDIS = 5 V 4
DISB Input High Voltage Vd,ih 2 5 V 4
DISB Input High Voltage Hysteresis Vd,hys 500 mV 4
DISB Input Low Voltage Vd,il 0 800 mV 4
Current Sense Low-Frequency Gain Acsa 0.9 1 1.1 V/V Input-to-output gain at dc, ISNS ≤ 1 V 4
Current Sense Bandwidth BWcsa 2.5 MHz Gain of Acsa − 3 dB 4
ISNS Input Bias Current Isns,bias 30 50 µA Out of ISNS pin 4
Current Limit Threshold Voltage Vcl 180 200 220 mV Voltage on ISNS pin, NCV887711 4
Current Limit Response Time tcl 80 125 ns CL tripped until GDRV falling edge, VISNS = Vcl(typ) + 60 mV 4
Overcurrent Protection Threshold Voltage %Vocp 125 150 175 % Percent of Vcl 4
Overcurrent Protection Response Time tocp 80 125 ns From overcurrent event, Until switching stops, VISNS = VOCP + 40 mV 4
Transconductance gm,vea 0.8 1.2 1.63 mS VOUT = ±100 mV 5
VEA Output Resistance Ro,vea 2 MΩ 5
VEA Maximum Output Voltage Vc,max 2.5 V 5
VEA Sourcing Current Isrc,vea 80 100 µA VEA output current, Vc = 2.0 V 5
VEA Sinking Current Isnk,vea 80 100 µA VEA output current, Vc = 1.5 V 5
VEA Clamp Voltage Vc,clamp 1.1 V VOUT < VOUT,des 5
GDRV Switching Delay 55 64 µs VOUT < VOUT,des or when IC DISB goes from low to high with Vc pin compensation network disconnected 5
Gate Driver Sourcing Current Isrc 550 800 mA VDRV ≥ Typical Driving Voltage Specification, VDRV − VGDRV = 2 V 5
Gate Driver Sinking Current Isink 480 600 mA VGDRV ≥ 2 V 5
Driving Voltage Dropout Vdrv,do 0.3 0.6 V VOUT − VDRV, IvDRV = 25 mA 5
Driving Voltage Source Current Idrv 35 45 mA VOUT − VDRV = 1 V 5
Backdrive Diode Voltage Drop Vd,bd 0.7 V VDRV, VOUT, Id,bd = 5 mA 5
Driving Voltage VDRV 5.67 5.9 6.13 V IVDRV = 0.1 − 25 mA, NCV887711 5
Pull-down Resistance 21 kΩ 5
Undervoltage Lock-out Threshold Voltage Vuvlo 3.54 3.73 4 V VOUT falling, NCV887711 5
Undervoltage Lock-out Hysteresis Vuvlo,hys 325 442 563 mV VOUT rising, NCV887711 5
Thermal Shutdown Threshold Tsd 160 170 180 °C TJ rising 5
Thermal Shutdown Hysteresis Tsd,hys 10 15 20 °C TJ falling 5
Thermal Shutdown Delay tsd,dly 100 ns From TJ > Tsd to stop switching 5
Voltage Regulation VOUT,reg 8.06 8.55 8.72 V NCV887711 5
Threshold IC Enable 8.82 9.11 9.39 V VOUT descending, NCV887711 6
Threshold IC Disable 9.33 9.62 9.91 V VOUT ascending, NCV887711 6
Threshold IC Enable, Voltage Regulation 0.33 0.5 V NCV887711 6
Threshold IC Disable, Threshold IC Enable 0.4 V NCV887711 6
DC Supply Voltage (VOUT) VOUT -0.3 40 V 3
Peak Transient Voltage (Load Dump on VOUT) VOUT 45 V 3
DC Supply Voltage (VDRV, GDRV) VDRV 12 V 3
DC Voltage (VC, ISNS, ROSC) -0.3 3.6 V 3
DC Voltage (DISB) -0.3 6 V 3
DC Voltage Stress (VOUT − VDRV) -0.7 40 V 3
Operating Junction Temperature TJ -40 150 °C 3
Storage Temperature Range Tstg -65 150 °C 3
Peak Reflow Soldering Temperature 265 °C Pb-Free, 60 to 150 seconds at 217°C 3
Package Thermal Resistance Junction-to-Ambient RθJA 100 °C/W 1 in2, 1 oz copper area used for heatsinking 3
ROSC Voltage VROSC 1 V 4

CAD (KiCad official)

  • Symbol: NCV887711D1R2G
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ncv887711d1r2g-etched.step / ncv887711d1r2g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncv887711d1r2g.step / ncv887711d1r2g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (18 pp, sha256 706e6895d933f4b9, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF