component
NCV8560SNADJT1G
Public Made by Adomby adom
onsemi Linear Voltage Regulators (LDO), TSOP-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNCV8560SNADJT1G
onsemi · Linear Voltage Regulators (LDO) · TSOP-5
NCV8560SNADJT1G from onsemi, in a TSOP-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vin | power_in | Positive power supply input, operating range Vout + VDO (minimum 1.75 V) to 6 V, with a 1.0 µF ceramic or tantalum capacitor recommended close to the package. |
| 2 | GND | power_in | Power supply ground and device substrate. |
| 3 | ENABLE | input | Enable input places the device into low-power standby when pulled to logic low (< 0.4 V), and it must be connected to Vin if the function is not used. |
| 4 | ADJ | input | Output voltage adjust input on the adjustable version (NC on fixed voltage versions), where external resistors set Vout from 1.25 V to 5.0 V. |
| 5 | Vout | power_out | Regulated output voltage delivering up to 150 mA, with a minimum 1.0 µF output capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TSOP-5 |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | Vout | 1.231 | 1.25 | 1.269 | V | Iout = 1.0 mA to 150 mA, Vin = 1.75 V to 6.0 V, Vout = ADJ | 4 |
| Line Regulation | Regline | 1 | 10 | mV | Vin = 1.750 V to 6.0 V, Iout = 1.0 mA | 4 | |
| Load Regulation | Regload | 2 | 15 | mV | Iout = 1.0 mA to 150 mA | 4 | |
| Output Short Circuit Current | Isc | 300 | 550 | 800 | mA | 4 | |
| Dropout Voltage, Vout = 1.25 V | VDO | 175 | 250 | mV | Measured at Vout - 2.0%, Iout = 150 mA | 4 | |
| Disable Current | IDIS | 0.01 | 1 | µA | ENABLE = 0 V, Vin = 6 V, -40°C ≤ TA ≤ 85°C | 3 | |
| Ground Current, Adjustable Option | IGND | 100 | 135 | µA | ENABLE = 0.9 V, Iout = 1.0 mA to 150 mA | 3 | |
| Thermal Shutdown Temperature | TSD | 150 | 175 | 200 | °C | 3 | |
| ADJ Input Bias Current | IADJ | -0.75 | 0.75 | µA | 3 | ||
| ENABLE Threshold Logic High | Vth(EN) | 0.9 | V | Voltage Increasing, Logic High | 3 | ||
| ENABLE Threshold Logic Low | Vth(EN) | 0.4 | V | Voltage Decreasing, Logic Low | 3 | ||
| Enable Input Bias Current | IEN | 3 | 100 | nA | 3 | ||
| Output Turn On Time, Adjustable Option | tEN | 15 | 25 | µs | ENABLE = 0 V to Vin | 3 | |
| Input Voltage | Vin | -0.3 | 6 | V | 2 | ||
| Output, Enable, Adjustable Voltage | Vout, ENABLE, ADJ | -0.3 | V | Max is Vin + 0.3 V | 2 | ||
| Maximum Junction Temperature | TJ(max) | 150 | °C | 2 | |||
| Storage Temperature | TSTG | -65 | 150 | °C | 2 | ||
| ESD Capability, Human Body Model | ESDHBM | 3500 | V | 2 | |||
| ESD Capability, Machine Model | ESDMM | 200 | V | 2 | |||
| Operating Input Voltage | Vin | 1.75 | 6 | V | Min is Vout + VDO or 1.75 V, whichever is higher | 3 | |
| Adjustable Output Voltage Range | Vout | 1.25 | 5 | V | Adjustable version only | 3 | |
| Operating Ambient Temperature Range | TA | -40 | 125 | °C | 3 | ||
| Thermal Resistance, Junction-to-Air, TSOP-5 | RθJA | 205 | °C/W | Copper heat spreading area 650 mm2, 1 oz | 2 | ||
| Thermal Shutdown Hysteresis | TSH | 10 | °C | 3 | |||
| Ripple Rejection 120 Hz | RR | 62 | dB | Iout = 1.0 mA to 150 mA, f = 120 Hz | 4 | ||
| Ripple Rejection 1 kHz | RR | 55 | dB | Iout = 1.0 mA to 150 mA, f = 1.0 kHz | 4 | ||
| Ripple Rejection 10 kHz | RR | 38 | dB | Iout = 1.0 mA to 150 mA, f = 10 kHz | 4 | ||
| Output Noise Voltage | Vn | 50 | µVrms | f = 10 Hz to 100 kHz | 4 |
CAD (KiCad official)
- Symbol:
NCV8560SNADJT1G - Footprint:
Package_SO:TSOP-5_1.65x3.05mm_P0.95mm - 3D model: TSOP-5 (KiCad packages3D, STEP)
- 3D model files:
ncv8560snadjt1g-etched.step/ncv8560snadjt1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncv8560snadjt1g.step/ncv8560snadjt1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (16 pp, sha256
9f90be6bd7152dab, retrieved 2026-10-22, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).