NCV8460ADR2G

{
  "slug": "ncv8460adr2g",
  "version": "0.1.0",
  "type": "component",
  "description": "onsemi Power Distribution Switches, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "ncv8460adr2g",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ncv8460adr2g.kicad_sym",
    "ncv8460adr2g.kicad_mod",
    "ncv8460adr2g.glb",
    "ncv8460adr2g.step",
    "ncv8460adr2g.lbr",
    "docs/hero.png",
    "docs/ncv8460adr2g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ncv8460adr2g-hero.glb",
    "ncv8460adr2g-hero.overlay.json",
    "ncv8460adr2g-etched.glb"
  ],
  "component": {
    "mpn": "NCV8460ADR2G",
    "manufacturer": "onsemi",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "Power Distribution Switches",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884393360838656",
    "parts": {
      "symbol": "ncv8460adr2g.kicad_sym",
      "footprint": "ncv8460adr2g.kicad_mod",
      "model_3d": "ncv8460adr2g-hero.glb",
      "model_3d_plain": "ncv8460adr2g-etched.glb",
      "model_3d_step": "ncv8460adr2g-etched.step",
      "model_3d_step_plain": "ncv8460adr2g.step",
      "lbr": "ncv8460adr2g.lbr"
    },
    "distributor_links": {
      "lcsc": "C424245",
      "digikey": "NCV8460ADR2GOSTR-ND",
      "mouser": "863-NCV8460ADR2G"
    },
    "distributor_check": {
      "checked_at": "2026-10-20T23:43:00Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "NCV8460ADR2GOSTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "863-NCV8460ADR2G",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground; an external reverse-battery resistor RGND is required between this pin and system ground, sized from the datasheet formulas (RGND ≤ 600 mV / Id(on) max and RGND ≥ (−VD) / (−Ignd))."
      },
      {
        "number": "2",
        "name": "IN",
        "type": "input",
        "description": "Logic-level control input compatible with 3.3 V / 5 V CMOS, with Vin_low maximum 1.25 V, Vin_high minimum 3.25 V, and input voltage limited to −8 V to 8 V."
      },
      {
        "number": "3",
        "name": "STAT",
        "type": "output",
        "description": "Status output that reports open load, overtemperature and current limitation; Vstat_low is at most 0.5 V at Istat = 1.6 mA and status current is limited to ±5 mA."
      },
      {
        "number": "4",
        "name": "N/C",
        "type": "unconnected",
        "description": "No connection; the datasheet lists this pin as not connected."
      },
      {
        "number": "5",
        "name": "VD",
        "type": "power_in",
        "description": "Supply voltage input with an operating range of 6 V to 36 V and a maximum DC supply rating of 41 V."
      },
      {
        "number": "6",
        "name": "OUT",
        "type": "output",
        "description": "Switched high-side output protected by active current limit (Ilim 6 A min, 15 A max) and thermal shutdown, with output clamp voltage of VD − 41 V to VD − 55 V."
      },
      {
        "number": "7",
        "name": "OUT",
        "type": "output",
        "description": "Second switched high-side output pin, listed with the same OUT function as pin 6 in the datasheet."
      },
      {
        "number": "8",
        "name": "VD",
        "type": "power_in",
        "description": "Supply voltage input with an operating range of 6 V to 36 V and a maximum DC supply rating of 41 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The top-view pin-connection drawing text on page 1 is garbled, so pin numbers and names were taken f; Pin 4 is labeled N/C in the table and NC in the drawing; it is recorded as unconnected. The datashee; The SO-8 package and ordering code NCV8460ADR2G are confirmed on page 1, so the pinout applies to th"
        ],
        "pages_sent": 16,
        "cost_usd": 0.0557,
        "at": "2026-10-20T23:40:35"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884393360838656",
        "pages": 16,
        "sha256": "0919c50ed2e08419",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ncv8460adr2g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ncv8460adr2g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "84dc4b44645e7f7a03a2ff249a331165ccd65e00c8c5af74e0af94d67f77056c",
        "checked": "2026-10-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}