Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
NCV8161BSN300T1G
onsemi · Linear Voltage Regulators (LDO) · TSOP-5
NCV8161BSN300T1G from onsemi, in a TSOP-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input voltage supply pin, with the recommended operating input voltage range of 1.9 V to 5.5 V. |
| 2 | GND | power_in | Common ground connection for the regulator. |
| 3 | EN | input | Chip enable: applying VEN < 0.4 V disables the regulator, and pulling VEN > 1.2 V enables the LDO. |
| 4 | N/C | unconnected | Not connected; this pin can be tied to ground to improve thermal dissipation. |
| 5 | OUT | power_out | Regulated output voltage, which should be bypassed with a small ceramic capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TSOP-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Input Voltage | VIN | 1.9 | 5.5 | V | 4 | ||
| Input Voltage | VIN | 1.9 | 5.5 | V | 3 | ||
| Junction Temperature | TJ | -40 | 125 | °C | 3 | ||
| Input Voltage | VIN | -0.3 | 6 | V | Note 1 | 3 | |
| Output Voltage | VOUT | -0.3 | 6 | V | VIN + 0.3 V, max 6 V | 3 | |
| Chip Enable Input | VCE | -0.3 | 6 | V | VIN + 0.3 V, max 6 V | 3 | |
| Operating Ambient Temperature Range | TA | -40 | 125 | °C | 3 | ||
| Maximum Junction Temperature | TJ | 150 | °C | 3 | |||
| Storage Temperature Range | TSTG | -55 | 150 | °C | 3 | ||
| ESD Capability, Human Body Model | ESDHBM | 2000 | V | Note 2 | 3 | ||
| ESD Capability, Machine Model | ESDMM | 200 | V | Note 2 | 3 | ||
| Output Voltage Accuracy | VOUT | -2 | 2 | % | −40°C ≤ TJ ≤ 125°C | 4 | |
| Load Regulation | LoadReg | 0.005 | 0.008 | %/mA | IOUT = 1 mA to 450 mA, TSOP-5 | 4 | |
| Dropout Voltage | VDO | 240 | 330 | mV | IOUT = 450 mA (TSOP-5), VOUT(NOM) = 3.0 V | 4 | |
| Output Current Limit | ICL | 450 | 700 | mA | VOUT = 90% VOUT(NOM) | 4 | |
| EN Input Voltage High | VENH | 1.2 | V | EN Input Voltage “H” | 4 | ||
| EN Input Voltage Low | VENL | 0.4 | V | EN Input Voltage “L” | 4 | ||
| Shutdown Current | IDIS | 0.01 | 1 | µA | VEN ≤ 0.4 V, VIN = 4.8 V | 4 | |
| EN Pull Down Current | IEN | 0.2 | 0.5 | µA | VEN = 4.8 V | 4 | |
| Quiescent Current | IQ | 18 | 23 | µA | IOUT = 0 mA | 4 | |
| Line Transient | TranLINE | -1 | mV | VIN = (VOUT(NOM) + 1 V) to (VOUT(NOM) + 1.6 V) in 30 µs, IOUT = 1 mA | 4 | ||
| Line Transient | TranLINE | 1 | mV | VIN = (VOUT(NOM) + 1.6 V) to (VOUT(NOM) + 1 V) in 30 µs, IOUT = 1 mA | 4 | ||
| Load Transient | TranLOAD | -40 | mV | IOUT = 1 mA to 450 mA in 10 µs | 4 | ||
| Load Transient | TranLOAD | 40 | mV | IOUT = 450 mA to 1 mA in 10 µs | 4 | ||
| Line Regulation | LineReg | 0.02 | %/V | VOUT(NOM) + 1 V ≤ VIN ≤ 5.5 V | 4 | ||
| Short Circuit Current | ISC | 690 | mA | VOUT = 0 V | 4 | ||
| Power Supply Rejection Ratio | PSRR | 91 | dB | IOUT = 20 mA, f = 100 Hz | 4 | ||
| Power Supply Rejection Ratio | PSRR | 98 | dB | IOUT = 20 mA, f = 1 kHz | 4 | ||
| Power Supply Rejection Ratio | PSRR | 82 | dB | IOUT = 20 mA, f = 10 kHz | 4 | ||
| Power Supply Rejection Ratio | PSRR | 48 | dB | IOUT = 20 mA, f = 100 kHz | 4 | ||
| Output Voltage Noise | VN | 14 | µVRMS | f = 10 Hz to 100 kHz, IOUT = 1 mA | 4 | ||
| Output Voltage Noise | VN | 10 | µVRMS | f = 10 Hz to 100 kHz, IOUT = 250 mA | 4 | ||
| Turn-On Time | 120 | µs | COUT = 1 µF, from assertion of VEN to VOUT = 95% VOUT(NOM) | 4 | |||
| Thermal Shutdown Threshold, temperature rising | TSDH | 160 | °C | Temperature rising | 4 | ||
| Thermal Shutdown Threshold, temperature falling | TSDL | 140 | °C | Temperature falling | 4 | ||
| Thermal Resistance, Junction-to-Air | RJA | 218 | °C/W | TSOP-5, JEDEC board (Note 3) | 3 |
CAD (KiCad official)
- Symbol:
NCV8161BSN300T1G - Footprint:
Package_SO:TSOP-5_1.65x3.05mm_P0.95mm - 3D model: TSOP-5 (KiCad packages3D, STEP)
- 3D model files:
ncv8161bsn300t1g-etched.step/ncv8161bsn300t1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncv8161bsn300t1g.step/ncv8161bsn300t1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (17 pp, sha256
e28224520972c0e7, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).