main
Ray
Publish 0.1.0
7911ce4
NCV8161ASN300T1G
onsemi · Linear Voltage Regulators (LDO) · TSOP-5
NCV8161ASN300T1G from onsemi, in a TSOP-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input voltage supply pin; the datasheet gives the operating input voltage range as 1.9 V to 5.5 V. |
| 2 | GND | power_in | Common ground connection. |
| 3 | EN | input | Chip enable: applying VEN < 0.4 V disables the regulator, and pulling VEN > 1.2 V enables the LDO. |
| 4 | N/C | unconnected | Not connected; this pin can be tied to ground to improve thermal dissipation. |
| 5 | OUT | power_out | Regulated output voltage; the output should be bypassed with a small 1 µF ceramic capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TSOP-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Input Voltage | VIN | 1.9 | 5.5 | V | 4 | ||
| Output Voltage Accuracy | VOUT | -2 | 2 | % | −40°C ≤ TJ ≤ 125°C | 4 | |
| Load Regulation (TSOP-5) | LoadReg | 0.005 | 0.008 | %/mA | IOUT = 1 mA to 450 mA, TSOP-5 | 4 | |
| Dropout Voltage (TSOP-5, VOUT(NOM) = 3.0 V) | VDO | 240 | 330 | mV | IOUT = 450 mA (TSOP-5), VOUT(NOM) = 3.0 V | 4 | |
| Output Current Limit | ICL | 450 | 700 | mA | VOUT = 90% VOUT(NOM) | 4 | |
| Quiescent Current | IQ | 18 | 23 | µA | IOUT = 0 mA | 4 | |
| Shutdown Current | IDIS | 0.01 | 1 | µA | VEN ≤ 0.4 V, VIN = 4.8 V | 4 | |
| EN Input Voltage High | VENH | 1.2 | V | 4 | |||
| EN Input Voltage Low | VENL | 0.4 | V | 4 | |||
| EN Pull Down Current | IEN | 0.2 | 0.5 | µA | VEN = 4.8 V | 4 | |
| Line Transient (step up) | TranLINE | -1 | mV | VIN = (VOUT(NOM) + 1 V) to (VOUT(NOM) + 1.6 V) in 30 µs, IOUT = 1 mA | 4 | ||
| Line Transient (step down) | TranLINE | 1 | mV | VIN = (VOUT(NOM) + 1.6 V) to (VOUT(NOM) + 1 V) in 30 µs, IOUT = 1 mA | 4 | ||
| Load Transient (1 mA to 450 mA) | TranLOAD | -40 | mV | IOUT = 1 mA to 450 mA in 10 µs | 4 | ||
| Load Transient (450 mA to 1 mA) | TranLOAD | 40 | mV | IOUT = 450 mA to 1 mA in 10 µs | 4 | ||
| Input Voltage | VIN | -0.3 | 6 | V | Note 1 | 3 | |
| Output Voltage | VOUT | -0.3 | 6 | V | Range −0.3 to VIN + 0.3, max 6 V | 3 | |
| Chip Enable Input | VCE | -0.3 | 6 | V | Range −0.3 to VIN + 0.3, max 6 V | 3 | |
| Operating Ambient Temperature Range | TA | -40 | 125 | °C | 3 | ||
| Maximum Junction Temperature | TJ | 150 | °C | 3 | |||
| Storage Temperature Range | TSTG | -55 | 150 | °C | 3 | ||
| ESD Capability, Human Body Model | ESDHBM | 2000 | V | Per EIA/JESD22-A114 | 3 | ||
| ESD Capability, Machine Model | ESDMM | 200 | V | Per EIA/JESD22-A115 | 3 | ||
| Input Voltage (recommended) | VIN | 1.9 | 5.5 | V | 3 | ||
| Junction Temperature (recommended) | TJ | -40 | 125 | °C | 3 | ||
| Thermal Resistance, Junction-to-Air (TSOP-5) | RJA | 218 | °C/W | TSOP-5, measured per JEDEC board specification (JESD51-7) | 3 |
CAD (KiCad official)
- Symbol:
NCV8161ASN300T1G - Footprint:
Package_SO:TSOP-5_1.65x3.05mm_P0.95mm - 3D model: TSOP-5 (KiCad packages3D, STEP)
- 3D model files:
ncv8161asn300t1g-etched.step/ncv8161asn300t1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncv8161asn300t1g.step/ncv8161asn300t1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (17 pp, sha256
e28224520972c0e7, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NCV8161ASN300T1G
**onsemi** · Linear Voltage Regulators (LDO) · TSOP-5
NCV8161ASN300T1G from onsemi, in a TSOP-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input voltage supply pin; the datasheet gives the operating input voltage range as 1.9 V to 5.5 V. |
| 2 | GND | power_in | Common ground connection. |
| 3 | EN | input | Chip enable: applying VEN < 0.4 V disables the regulator, and pulling VEN > 1.2 V enables the LDO. |
| 4 | N/C | unconnected | Not connected; this pin can be tied to ground to improve thermal dissipation. |
| 5 | OUT | power_out | Regulated output voltage; the output should be bypassed with a small 1 µF ceramic capacitor. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TSOP-5 |
| Category | Power Supply Chip |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Input Voltage | VIN | 1.9 | | 5.5 | V | | 4 |
| Output Voltage Accuracy | VOUT | -2 | | 2 | % | −40°C ≤ TJ ≤ 125°C | 4 |
| Load Regulation (TSOP-5) | LoadReg | | 0.005 | 0.008 | %/mA | IOUT = 1 mA to 450 mA, TSOP-5 | 4 |
| Dropout Voltage (TSOP-5, VOUT(NOM) = 3.0 V) | VDO | | 240 | 330 | mV | IOUT = 450 mA (TSOP-5), VOUT(NOM) = 3.0 V | 4 |
| Output Current Limit | ICL | 450 | 700 | | mA | VOUT = 90% VOUT(NOM) | 4 |
| Quiescent Current | IQ | | 18 | 23 | µA | IOUT = 0 mA | 4 |
| Shutdown Current | IDIS | | 0.01 | 1 | µA | VEN ≤ 0.4 V, VIN = 4.8 V | 4 |
| EN Input Voltage High | VENH | 1.2 | | | V | | 4 |
| EN Input Voltage Low | VENL | | | 0.4 | V | | 4 |
| EN Pull Down Current | IEN | | 0.2 | 0.5 | µA | VEN = 4.8 V | 4 |
| Line Transient (step up) | TranLINE | -1 | | | mV | VIN = (VOUT(NOM) + 1 V) to (VOUT(NOM) + 1.6 V) in 30 µs, IOUT = 1 mA | 4 |
| Line Transient (step down) | TranLINE | | | 1 | mV | VIN = (VOUT(NOM) + 1.6 V) to (VOUT(NOM) + 1 V) in 30 µs, IOUT = 1 mA | 4 |
| Load Transient (1 mA to 450 mA) | TranLOAD | -40 | | | mV | IOUT = 1 mA to 450 mA in 10 µs | 4 |
| Load Transient (450 mA to 1 mA) | TranLOAD | | | 40 | mV | IOUT = 450 mA to 1 mA in 10 µs | 4 |
| Input Voltage | VIN | -0.3 | | 6 | V | Note 1 | 3 |
| Output Voltage | VOUT | -0.3 | | 6 | V | Range −0.3 to VIN + 0.3, max 6 V | 3 |
| Chip Enable Input | VCE | -0.3 | | 6 | V | Range −0.3 to VIN + 0.3, max 6 V | 3 |
| Operating Ambient Temperature Range | TA | -40 | | 125 | °C | | 3 |
| Maximum Junction Temperature | TJ | | | 150 | °C | | 3 |
| Storage Temperature Range | TSTG | -55 | | 150 | °C | | 3 |
| ESD Capability, Human Body Model | ESDHBM | | | 2000 | V | Per EIA/JESD22-A114 | 3 |
| ESD Capability, Machine Model | ESDMM | | | 200 | V | Per EIA/JESD22-A115 | 3 |
| Input Voltage (recommended) | VIN | 1.9 | | 5.5 | V | | 3 |
| Junction Temperature (recommended) | TJ | -40 | | 125 | °C | | 3 |
| Thermal Resistance, Junction-to-Air (TSOP-5) | RJA | | 218 | | °C/W | TSOP-5, measured per JEDEC board specification (JESD51-7) | 3 |
## CAD (KiCad official)
- Symbol: `NCV8161ASN300T1G`
- Footprint: `Package_SO:TSOP-5_1.65x3.05mm_P0.95mm`
- 3D model: TSOP-5 (KiCad packages3D, STEP)
- 3D model files: `ncv8161asn300t1g-etched.step` / `ncv8161asn300t1g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ncv8161asn300t1g.step` / `ncv8161asn300t1g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/ncv8161-d.pdf) (17 pp, sha256 `e28224520972c0e7`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ncv8161asn300t1g-datasheet.pdf)