NCV8114ASN165T1G

{
  "slug": "ncv8114asn165t1g",
  "version": "0.1.0",
  "type": "component",
  "description": "onsemi Global Sourcing Parts, TSOP-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "global sourcing parts",
    "ncv8114asn165t1g",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ncv8114asn165t1g.kicad_sym",
    "ncv8114asn165t1g.kicad_mod",
    "ncv8114asn165t1g.glb",
    "ncv8114asn165t1g.step",
    "ncv8114asn165t1g.lbr",
    "docs/hero.png",
    "docs/ncv8114asn165t1g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ncv8114asn165t1g-hero.glb",
    "ncv8114asn165t1g-hero.overlay.json",
    "ncv8114asn165t1g-etched.glb"
  ],
  "component": {
    "mpn": "NCV8114ASN165T1G",
    "manufacturer": "onsemi",
    "package": "TSOP-5",
    "pin_count": 5,
    "category": "Global Sourcing Parts",
    "subcategory": "Global Sourcing Parts",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588928544479461376",
    "parts": {
      "symbol": "ncv8114asn165t1g.kicad_sym",
      "footprint": "ncv8114asn165t1g.kicad_mod",
      "model_3d": "ncv8114asn165t1g-hero.glb",
      "model_3d_plain": "ncv8114asn165t1g-etched.glb",
      "model_3d_step": "ncv8114asn165t1g-etched.step",
      "model_3d_step_plain": "ncv8114asn165t1g.step",
      "lbr": "ncv8114asn165t1g.lbr"
    },
    "distributor_links": {
      "lcsc": "C893066",
      "digikey": "488-NCV8114ASN165T1GTR-ND",
      "mouser": "863-NCV8114ASN165T1G"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T04:37:18Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "488-NCV8114ASN165T1GTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "863-NCV8114ASN165T1G",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "IN",
        "type": "power_in",
        "description": "Input pin; a small capacitor from this pin to ground is needed to assure stability, with recommended VIN of 1.7 V to 5.5 V."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Power supply ground."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "Driving EN above 0.9 V turns on the regulator, and driving EN below 0.4 V puts the regulator into shutdown mode."
      },
      {
        "number": "4",
        "name": "N/C",
        "type": "unconnected",
        "description": "Not connected; this pin can be tied to ground to improve thermal dissipation."
      },
      {
        "number": "5",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated output voltage pin; a ceramic capacitor with a minimum value of 1 µF is needed from this pin to ground to assure stability."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The micro symbol was dropped in text extraction. The datasheet reads '1 F' for the OUT and IN capaci; Pin 3 EN text says 'over 0.9 V' in the pin table. The description was written as 'above 0.9 V' to ma"
        ],
        "pages_sent": 13,
        "cost_usd": 0.0755,
        "at": "2026-10-18T04:35:50"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588928544479461376",
        "pages": 13,
        "sha256": "804c2ef32d0825b8",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 5,
        "described": 5,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ncv8114asn165t1g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          3.05,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7bb4f709cbcec3383aaa7ba920208a4d73b376d9bb60806b65f21dbdb00a84b7",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ncv8114asn165t1g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          3.05,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07c876c220c8fee8de043ea01baa5ed1db7155ca393ff6b03b8ad19715080dad",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}