main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ncv7805bdtrkg: viewers rendered from the public page · Ray
ncv7805bdtrkg-etched.glb Publish 0.1.0 · Ray
ncv7805bdtrkg-etched.step ncv7805bdtrkg: factory component page (tier=mfr) · Ray
ncv7805bdtrkg-hero.glb ncv7805bdtrkg: hero GLB from the etched model (keeps the MPN mark) · Ray
ncv7805bdtrkg-hero.overlay.json Publish 0.1.0 · Ray
ncv7805bdtrkg.glb Publish 0.1.0 · Ray
ncv7805bdtrkg.kicad_mod Publish 0.1.0 · Ray
ncv7805bdtrkg.kicad_sym Publish 0.1.0 · Ray
ncv7805bdtrkg.lbr Publish 0.1.0 · Ray
ncv7805bdtrkg.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 3 pins · Ray

NCV7805BDTRKG

onsemi · Linear Voltage Regulators (LDO) · TO-252-2(DPAK)

NCV7805BDTRKG from onsemi, in a TO-252-2(DPAK). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Input power_in The input voltage must remain typically 2.0 V above the output voltage even during the low point of the input ripple voltage.
2 Ground power_in This ground pin must be a common ground between the input and output voltages, and the heatsink surface (tab) is connected to this pin.
3 Output power_out The regulated 5.0 V output; an output capacitor CO is not needed for stability but improves transient response, and values below 0.1 µF could cause instability.

Key specifications

Parameter Value
Manufacturer onsemi
Package TO-252-2(DPAK)
Category Power Management ICs
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage (TJ = 25°C) VO 4.8 5 5.2 Vdc TJ = 25°C 3
Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) VO 4.75 5 5.25 Vdc 5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W; 7.0 Vdc ≤ Vin ≤ 20 Vdc 3
Line Regulation (Note 4) Regline 5 100 mV 7.5 Vdc ≤ Vin ≤ 20 Vdc, 1.0 A 3
Line Regulation (Note 4) Regline 1.3 50 mV 8.0 Vdc ≤ Vin ≤ 12 Vdc 3
Load Regulation (Note 4) Regload 1.3 100 mV 5.0 mA ≤ IO ≤ 1.0 A 3
Load Regulation (Note 4) Regload 0.15 50 mV 5.0 mA ≤ IO ≤ 1.5 A (TA = 25°C) 3
Quiescent Current IB 3.2 8 mA 3
Quiescent Current Change IB 0.5 mA 5.0 mA ≤ IO ≤ 1.0 A (TA = 25°C) 3
Ripple Rejection RR 68 dB 8.0 Vdc ≤ Vin ≤ 18 Vdc, f = 120 Hz 3
Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI − VO 2 Vdc IO = 1.0 A, TJ = 25°C 3
Output Noise Voltage (TA = 25°C) Vn 10 V/VO 10 Hz ≤ f ≤ 100 kHz, TA = 25°C 3
Output Resistance rO 0.9 m f = 1.0 kHz 3
Short Circuit Current Limit (TA = 25°C) ISC 0.2 A TA = 25°C, Vin = 35 Vdc 3
Peak Output Current (TJ = 25°C) Imax 2.2 A TJ = 25°C 3
Average Temperature Coefficient of Output Voltage TCVO -0.3 mV/°C 3
Input Voltage (5.0 − 18 V) VI 35 Vdc Input Voltage (5.0 − 18 V) 1
Storage Junction Temperature Range Tstg -65 150 °C 1
Operating Junction Temperature TJ 150 °C 1
Operating Junction Temperature Range (NCV7805BDTRKG) TJ -40 125 °C NCV7805BDTRKG ordering entry: TJ = −40°C to +125°C 21
Thermal Resistance, Junction-to-Ambient (DPAK, case 369C) RJA 92 °C/W DPAK (case 369C) column 1
Thermal Resistance, Junction-to-Case (DPAK, case 369C) RJC 5 °C/W DPAK (case 369C) column 1

CAD (KiCad official)

  • Symbol: NCV7805BDTRKG
  • Footprint: Package_TO_SOT_SMD:TO-252-2
  • 3D model: TO-252-2(DPAK) (KiCad packages3D, STEP)
  • 3D model files: ncv7805bdtrkg-etched.step / ncv7805bdtrkg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncv7805bdtrkg.step / ncv7805bdtrkg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (29 pp, sha256 0d716b89ee95cd63, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF