component
NCV7718CDPR2G
Public Made by Adomby adom
onsemi Gate Drive ICs, SSOP-24-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340
{
"slug": "ncv7718cdpr2g",
"version": "0.1.0",
"type": "component",
"description": "onsemi Gate Drive ICs, SSOP-24-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management ics",
"ncv7718cdpr2g",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ncv7718cdpr2g.kicad_sym",
"ncv7718cdpr2g.kicad_mod",
"ncv7718cdpr2g.glb",
"ncv7718cdpr2g.step",
"ncv7718cdpr2g.lbr",
"docs/hero.png",
"docs/ncv7718cdpr2g-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ncv7718cdpr2g-hero.glb",
"ncv7718cdpr2g-hero.overlay.json",
"ncv7718cdpr2g-etched.glb"
],
"component": {
"mpn": "NCV7718CDPR2G",
"manufacturer": "onsemi",
"package": "SSOP-24-150mil",
"pin_count": 24,
"category": "Power Management ICs",
"subcategory": "Gate Drive ICs",
"datasheet": "https://www.onsemi.com/pdf/datasheet/ncv7718cdpr2-d.pdf",
"parts": {
"symbol": "ncv7718cdpr2g.kicad_sym",
"footprint": "ncv7718cdpr2g.kicad_mod",
"model_3d": "ncv7718cdpr2g-hero.glb",
"model_3d_plain": "ncv7718cdpr2g-etched.glb",
"model_3d_step": "ncv7718cdpr2g-etched.step",
"model_3d_step_plain": "ncv7718cdpr2g.step",
"lbr": "ncv7718cdpr2g.lbr"
},
"distributor_links": {
"lcsc": "C556475",
"digikey": "488-NCV7718CDPR2GTR-ND",
"mouser": "863-NCV7718CDPR2G"
},
"distributor_check": {
"checked_at": "2026-11-05T22:21:39Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "488-NCV7718CDPR2GTR-ND",
"status": "found",
"lifecycle": "Not For New Designs"
},
"mouser": {
"pn": "863-NCV7718CDPR2G",
"status": "found",
"lifecycle": "Not Recommended for New Designs"
}
},
"pins": [
{
"number": "1",
"name": "GND",
"type": "power_in",
"description": "Ground, shorted internally to pin 24."
},
{
"number": "2",
"name": "OUT1",
"type": "output",
"description": "Half-bridge output 1; recommended DC output current is 0.55 A max and the absolute output current rating is ±2.0 A."
},
{
"number": "3",
"name": "OUT5",
"type": "output",
"description": "Half-bridge output 5; recommended DC output current is 0.55 A max and the absolute output current rating is ±2.0 A."
},
{
"number": "4",
"name": "NC",
"type": "unconnected",
"description": "No connection; this pin should be isolated from any traces or vias on the PCB."
},
{
"number": "5",
"name": "SI",
"type": "input",
"description": "16-bit serial data input, 3.3 V/5 V (TTL) compatible, internally pulled down."
},
{
"number": "6",
"name": "VCC",
"type": "power_in",
"description": "Logic power supply input; recommended operating range is 3.15 V to 5.25 V."
},
{
"number": "7",
"name": "SO",
"type": "output",
"description": "16-bit serial data output, 3.3 V/5 V compliant."
},
{
"number": "8",
"name": "EN",
"type": "input",
"description": "Enable input; a high level wakes the IC from sleep mode, 3.3 V/5 V (TTL) compatible, internally pulled down."
},
{
"number": "9",
"name": "NC",
"type": "unconnected",
"description": "No connection; this pin should be isolated from any traces or vias on the PCB."
},
{
"number": "10",
"name": "OUT6",
"type": "output",
"description": "Half-bridge output 6; recommended DC output current is 0.55 A max and the absolute output current rating is ±2.0 A."
},
{
"number": "11",
"name": "OUT4",
"type": "output",
"description": "Half-bridge output 4; recommended DC output current is 0.55 A max and the absolute output current rating is ±2.0 A."
},
{
"number": "12",
"name": "GND",
"type": "power_in",
"description": "Ground, shorted internally to pin 13."
},
{
"number": "13",
"name": "GND",
"type": "power_in",
"description": "Ground, shorted internally to pin 12."
},
{
"number": "14",
"name": "OUT3",
"type": "output",
"description": "Half-bridge output 3; recommended DC output current is 0.55 A max and the absolute output current rating is ±2.0 A."
},
{
"number": "15",
"name": "NC",
"type": "unconnected",
"description": "No connection; this pin should be isolated from any traces or vias on the PCB."
},
{
"number": "16",
"name": "VS2",
"type": "power_in",
"description": "Power supply input for drivers 3, 4 and 6; must be connected externally to VS1; supply range 5.5 V to 28 V (recommended), absolute max 40 V DC."
},
{
"number": "17",
"name": "RESERVED",
"type": "passive",
"description": "Factory use only; connect to GND or leave unconnected, internally pulled down."
},
{
"number": "18",
"name": "RESERVED",
"type": "passive",
"description": "Factory use only; connect to GND or leave unconnected, internally pulled down."
},
{
"number": "19",
"name": "CSB",
"type": "input",
"description": "Chip select bar, active-low serial port operation, 3.3 V/5 V (TTL) compatible, internally pulled up."
},
{
"number": "20",
"name": "SCLK",
"type": "input",
"description": "Serial clock input for SPI communication, 3.3 V/5 V (TTL) compatible, internally pulled down."
},
{
"number": "21",
"name": "VS1",
"type": "power_in",
"description": "Power supply input for drivers 1, 2 and 5, all pre-drivers and the charge pump; must be connected externally to VS2; supply range 5.5 V to 28 V (recommended), absolute max 40 V DC."
},
{
"number": "22",
"name": "NC",
"type": "unconnected",
"description": "No connection; this pin should be isolated from any traces or vias on the PCB."
},
{
"number": "23",
"name": "OUT2",
"type": "output",
"description": "Half-bridge output 2; recommended DC output current is 0.55 A max and the absolute output current rating is ±2.0 A."
},
{
"number": "24",
"name": "GND",
"type": "power_in",
"description": "Ground, shorted internally to pin 1."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The requested MPN NCV7718CDPR2G does not appear anywhere in the supplied datasheet. The only SSOP24 ; The datasheet names the package SSOP24 NB (case 565AL) and does not print '150mil'. The narrow-body ; The Figure 3 pinout drawing text is scrambled in the extracted text, so pin numbers and names were t"
],
"pages_sent": 8,
"cost_usd": 0.0543,
"at": "2026-11-05T22:21:15"
},
"datasheet": {
"url": "https://www.onsemi.com/pdf/datasheet/ncv7718cdpr2-d.pdf",
"pages": 27,
"sha256": "78d84742edb2682e",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 24,
"described": 24,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ncv7718cdpr2g.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
8.7,
1.65
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "9e0654855743c5437aa9f4979b47c0dc621f54be5ccb6b51a2f0a01b2ec9981f",
"checked": "2026-11-05",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ncv7718cdpr2g-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
8.7,
1.65
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "5ca4d1d3d44a0bc6f9b839e31f68c7b2d2ea1ec4efb6a0abfcf110f6efcede20",
"checked": "2026-11-05",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "SSOP24 NB (CASE 565AL)",
"source_page": 27,
"D": {
"nom_mm": 8.65,
"range_mm": [
null,
null
]
},
"E1": {
"nom_mm": 3.9,
"range_mm": [
null,
null
]
},
"E": {
"nom_mm": 6.0,
"range_mm": [
null,
null
]
},
"e": {
"nom_mm": 0.65,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.75,
"range_mm": [
null,
1.75
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "ncv7718cdpr2g.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}