Generated by kicad-footprint-generator · KiCad file format 20260206
NCV75215DB001R2G
onsemi · Gate Drive ICs · TSSOP-16
NCV75215DB001R2G from onsemi, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RXN | input | Analog receiver negative input; either receiver input can carry the signal with the other as ground reference, but using an outer package pin for signal input may worsen EMC robustness. |
| 2 | RXP | input | Analog receiver positive input; either receiver input can carry the signal with the other as ground reference, but using an outer package pin for signal input may worsen EMC robustness. |
| 3 | GNDA | power_in | Analog ground for the receiver section. |
| 4 | n.c. | unconnected | Pin not connected. |
| 5 | GND | power_in | TX ground, also the digital ground of the device. |
| 6 | DRVA | output | Transmitter driver output A, which drives the ultrasonic transducer through the transformer, with DRVA/DRVB voltage limited to (2 × VSUP + 0.3) V or 40 V maximum. |
| 7 | DRVC | output | Transmitter driver output C, connected to the center of the transformer winding, with voltage limited to (VSUP + 0.3) V or 40 V maximum. |
| 8 | DRVB | output | Transmitter driver output B, which drives the ultrasonic transducer through the transformer, with DRVA/DRVB voltage limited to (2 × VSUP + 0.3) V or 40 V maximum. |
| 9 | VSUP | power_in | Main power supply input with a recommended DC supply range of 6 V to 18 V and an absolute maximum of 40 V. |
| 10 | IO | bidirectional | Bidirectional I/O line interface to the master ECU, with I/O line voltage absolute maximum of −5 V to 40 V. |
| 11 | GNDIO | power_in | Ground for the I/O line interface. |
| 12 | TST3 | bidirectional | Test pin 3 for the custom diagnostic interface, with test pin voltage limited to 0 V to (VDD + 0.3) V or 3.6 V. |
| 13 | TST2 | bidirectional | Test pin 2 for the custom diagnostic interface, with test pin voltage limited to 0 V to (VDD + 0.3) V or 3.6 V. |
| 14 | TST1 | bidirectional | Test pin 1 for the custom diagnostic interface, with test pin voltage limited to 0 V to (VDD + 0.3) V or 3.6 V. |
| 15 | TST0 | bidirectional | Test pin 0 for the custom diagnostic interface, with test pin voltage limited to 0 V to (VDD + 0.3) V or 3.6 V. |
| 16 | TSTEN | input | Manufacturer test mode enable that must always be grounded in customer application, as it has no customer functionality. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TSSOP-16 |
| Category | Power Supply Chip |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Receiver Gain Programmable | RXGAIN | 50 | 110 | dB | 5 | ||
| Receiver Bandwidth | RXBW | 35 | 90 | kHz | 5 | ||
| Programmable Transmitter Current | TXCURR | 50 | 350 | mA | 5 | ||
| Transmitter Current Tolerance | TXSPREC | -20 | 20 | % | 5 | ||
| Internal VDD Supply Voltage | VDD | 3.15 | 3.3 | 3.5 | V | 5 | |
| VDD Level for Power-on-Reset | VDDPOR | 2.7 | 3.1 | V | 5 | ||
| VSUP Level for Power-on-Reset Release at Start-up, Under-voltage Threshold | VSUPUV | 5.1 | 5.7 | V | 5 | ||
| VSUP Level for TX Driver Disable (to Protect Drivers), Over-voltage Threshold | VSUPOV | 18 | 20 | V | 5 | ||
| Internal Oscillator Frequency | FOSC | 9.7 | 10 | 10.3 | MHz | 5 | |
| Threshold Voltage for Digital Low | IOILV | 0.3 | 0.33 | 0.36 | VSUP | 5 | |
| Threshold Voltage for Digital High | IOIHV | 0.62 | 0.66 | 0.7 | VSUP | 5 | |
| Output Voltage Low at I/O Pin | IOOLV | 0.4 | 0.65 | 1 | V | IOUT = 1 mA, Internal Pull-up Activated, R4 Not Used | 5 |
| Output Slew Rate (Standard I/O Line Slope) | IOSR, STD | 0.2 | 0.5 | 0.8 | V/s | 5 | |
| Output Slew Rate (Fast I/O Line Slope) | IOSR, FAST | 1 | 1.7 | 2.5 | V/s | 5 | |
| I/O Short Circuit Current | IOSCC | 10 | 50 | mA | 5 | ||
| Fixed Internal Pull-up Resistor (R_PU_IOL) | IOPU | 200 | 320 | 450 | k | 5 | |
| Selectable Internal Pull-up Resistor | IOPU, SEL | 6 | 8.5 | 11 | k | 5 | |
| Temperature Measurement Range | TMR | -60 | 150 | °C | 5 | ||
| Temperature Measurement Accuracy at TJ = 42°C | TA41 | -7 | 7 | °C | TJ = 42°C | 5 | |
| Temperature Measurement Accuracy at TJ = 125°C | TA125 | -10 | 10 | °C | TJ = 125°C | 5 | |
| Temperature Measurement Accuracy at TJ = −40°C | TA40− | -10 | 10 | °C | TJ = −40°C | 5 | |
| Thermal Shutdown | TSD | 140 | 190 | °C | 5 | ||
| DC Supply Voltage | VSUP | 6 | 12 | 18 | V | 4 | |
| I/O Line Voltage | VIO | 0 | V | max = VSUP (Note 9) | 4 | ||
| Ambient Temperature under Bias | TA | -40 | 85 | °C | 4 | ||
| Junction Temperature under Bias | TJ | -40 | 125 | °C | 4 | ||
| Supply Voltage Range | VSUP | -0.3 | 40 | V | 4 | ||
| I/O Line Voltage Range | VIO | -5 | 40 | V | 4 | ||
| I/O Line Voltage Range (TA = 25°C) | VIO,A | -15 | 40 | V | TA = 25°C | 4 | |
| I/O Line Voltage Range (tPULSE < 1 second, TA = 25°C) | VIO,PA | -30 | 40 | V | tPULSE < 1 second, TA = 25°C | 4 | |
| Transmitter DRVA, DRVB voltage | VDRV | -0.3 | V | DRVA, DRVB; max is (2 × VSUP + 0.3) or 40 V | 4 | ||
| Transmitter DRVC voltage | VDRV | -0.3 | V | DRVC; max is (VSUP + 0.3) or 40 V | 4 | ||
| Receiver Input P, N Voltage | VRXP, VRXN | -0.3 | 0.3 | V | 4 | ||
| Testmode Pin Voltage | VTST0 − VTST3 | 0 | V | max is (VDD + 0.3) or 3.6 V | 4 | ||
| Maximum Junction Temperature | TJ(max) | 125 | °C | 4 | |||
| Storage Temperature Range | TSTG | -40 | 125 | °C | 4 | ||
| Lead Temperature Soldering Reflow (SMD Styles Only), Pb-Free Versions | TSLD | 260 | °C | 4 | |||
| Thermal Resistance, Junction-to-Air | RJA | 135 | °C/W | TSSOP16 | 4 |
CAD (KiCad official)
- Symbol:
NCV75215DB001R2G - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
ncv75215db001r2g-etched.step/ncv75215db001r2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncv75215db001r2g.step/ncv75215db001r2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (44 pp, sha256
68eea8ae9b474546, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).