component

NCV7356D1R2G

Public Made by Adom

by adom

onsemi CAN Controllers, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentinterfacencv7356d1r2g
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

Datasheet

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

NCV7356D1R2G

onsemi · CAN Controllers · SOIC-8

NCV7356D1R2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 TxD input Transmit data input from the microcontroller to the CAN driver. CMOS-compatible input with internal pull-up current (10-50 uA); VIH = 2.0 V min, VIL = 0.8 V max at 6 V < VBAT < 27 V. Held recessive by internal pull-up if left open; also drives the TxD timeout logic.
2 MODE0 input Operating mode select input 0. Together with MODE1 selects Sleep / Normal / High-Speed / Wake-Up modes. CMOS input (VIH >= 2.0 V, VIL <= 0.8 V) with internal 10-50 kOhm pull-down resistor to GND.
3 MODE1 input Operating mode select input 1. Together with MODE0 selects Sleep / Normal / High-Speed / Wake-Up modes. CMOS input (VIH >= 2.0 V, VIL <= 0.8 V) with internal 10-50 kOhm pull-down resistor to GND.
4 RxD output Receive data output from the CAN receive comparator to the microcontroller. Open-drain / push-pull compatible: VOL <= 0.4 V at IRxD = 2 mA, high-level leakage +/-10 uA at VRxD = 5 V; output current capability up to 70 mA. Compatible with 3.3 V or 5 V logic rails.
5 VBAT power_in Battery / main supply input, 5.0-27 V normal operation (absolute max -0.3 to 18 V steady, 40 V load-dump, 27 V jump-start). Powers internal 5 V regulator, biasing, CAN driver and wave-shaping blocks; undervoltage lockout threshold VBATuv = 3.5-4.8 V.
6 LOAD passive Resistor load / switched ground pin for the loss-of-ground detection low-side switch. External resistor RL (typ 75-135 Ohm in high-speed mode, up to a few kOhm otherwise) is connected between this pin and the local ground return; the internal FET provides a controlled path with VLOAD <= 0.5 V at 5 mA.
7 CANH bidirectional Single-wire CAN bus I/O pin. Wave-shaped CAN driver output and receive-comparator input; recessive output ~0 V, dominant output 4.4-5.1 V (normal), up to 12.5 V (HV wake-up). Tolerates -40 to +40 V DC bus faults and ISO 7637 transients; ESD protected to 4 kV HBM.
8 GND power_in Device ground reference. All voltages in the datasheet are referenced to this pin; positive currents flow into the IC.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOIC-8
Category Interface
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • NCV7356D1R2GD1G
  • NCV7356D1R2G
  • NCV7356D1R2GD2G
  • NCV7356D1R2GD2R2G

CAD (KiCad official)

  • Symbol: NCV7356D1R2G
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ncv7356d1r2g-etched.step / ncv7356d1r2g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncv7356d1r2g.step / ncv7356d1r2g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (24 pp, sha256 7209d76963c70e27, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF