Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NCV7321D12R2G

onsemi · LIN Transceivers · SOIC-8

NCV7321D12R2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RxD output Open-drain output for received LIN data, driven low when bus is in dominant state (≤0.4×VBB) with 1.5 mA maximum sink current.
2 EN input Digital enable input with internal pull-down (150-650 kΩ) requiring high level (≥2 V) held for ≥2-18.5 μs to enter normal mode.
3 WAKE input High voltage input for local wake-up detection via falling edge, accepts -35 to +45 V maximum with internal pull-up current source (1-30 μA).
4 TxD input Digital transmit input with switchable pull-down (weak 150-650 kΩ or strong 1.5 mA) and 15-50 ms timeout to release bus if held low.
5 GND power_in Ground reference and supply return for the device.
6 LIN bidirectional Bidirectional LIN bus transceiver interface accepting ±45 V with 40-200 mA short-circuit limiting and internal 30 kΩ termination resistor.
7 VBB power_in Battery supply input accepting 5-27 V nominal (absolute maximum ±45 V) delivering 1.6-30 mA current depending on operating mode.
8 INH output Output driver for external regulator control with 15 mA capability and 0.05-0.75 V drop when active, floating in sleep/unpowered modes.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOIC-8
Category Interface
Pins 8

CAD (KiCad official)

  • Symbol: NCV7321D12R2G
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ncv7321d12r2g-etched.step / ncv7321d12r2g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncv7321d12r2g.step / ncv7321d12r2g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (15 pp, sha256 4ecfbe97473dcc8d, retrieved 2026-09-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF