← Commit history
page.json+8−5@@ -32,7 +32,7 @@ "number": "1", "name": "VIN", "type": "input",- "description": "Input signal to control the output. In galvanically isolated designs VIN is driven by an opto-coupler, pulse-transformer secondary, or digital-isolator output. VIN is internally clamped to 5.5 V and pulled up to VREF via a 1 M\u03a9 resistor so the output stays low with no input. Signal is inverted from VIN to VO. Minimum pulse-width at VIN is required before VO is activated."+ "description": "Input signal to control the output. In galvanically isolated designs VIN is driven by an opto-coupler, pulse-transformer secondary, or digital-isolator output. VIN is internally clamped to 5.5 V and pulled up to VREF via a 1 MΩ resistor so the output stays low with no input. Signal is inverted from VIN to VO. Minimum pulse-width at VIN is required before VO is activated." }, { "number": "2",@@ -50,7 +50,7 @@ "number": "4", "name": "DESAT", "type": "input",- "description": "Desaturation-detection input for IGBT fault sensing. A capacitor to GND on this pin sets a programmable blanking delay every ON cycle before the DESAT fault is processed, preventing false triggering. Threshold V_DESAT-THR \u2248 6.35 V; blanking charge current \u2248 0.24 mA."+ "description": "Desaturation-detection input for IGBT fault sensing. A capacitor to GND on this pin sets a programmable blanking delay every ON cycle before the DESAT fault is processed, preventing false triggering. Threshold V_DESAT-THR ≈ 6.35 V; blanking charge current ≈ 0.24 mA." }, { "number": "5",@@ -62,7 +62,7 @@ "number": "6", "name": "VO", "type": "output",- "description": "IGBT gate driver output. Sources +4 A / sinks -6 A peak into the IGBT gate (typ. 6.8 A sink, 7.8 A source at Rg = 0.1 \u03a9, VCC = 15 V, VEE = -8 V). VO is actively pulled low during start-up and under fault conditions."+ "description": "IGBT gate driver output. Sources +4 A / sinks -6 A peak into the IGBT gate (typ. 6.8 A sink, 7.8 A source at Rg = 0.1 Ω, VCC = 15 V, VEE = -8 V). VO is actively pulled low during start-up and under fault conditions." }, { "number": "7",@@ -74,7 +74,7 @@ "number": "8", "name": "CLAMP", "type": "bidirectional",- "description": "Active Miller Clamp pin. Provides clamping for the IGBT gate during the off period to protect it from parasitic (Miller) turn-on. Clamp activates at V_MC-THR \u2248 2.0 V above GND and can sink 500 mA. Tie directly to the IGBT gate with minimum trace length for best results."+ "description": "Active Miller Clamp pin. Provides clamping for the IGBT gate during the off period to protect it from parasitic (Miller) turn-on. Clamp activates at V_MC-THR ≈ 2.0 V above GND and can sink 500 mA. Tie directly to the IGBT gate with minimum trace length for best results." } ], "provenance": {@@ -152,5 +152,8 @@ "docs/ncv5701adr2g-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }