Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NCV5701ADR2G

onsemi · Isolators - Gate Drivers · SOIC-8

NCV5701ADR2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN input Input signal to control the output. In galvanically isolated designs VIN is driven by an opto-coupler, pulse-transformer secondary, or digital-isolator output. VIN is internally clamped to 5.5 V and pulled up to VREF via a 1 MΩ resistor so the output stays low with no input. Signal is inverted from VIN to VO. Minimum pulse-width at VIN is required before VO is activated.
2 VREF power_out 5 V reference output (4.85-5.15 V, up to 20 mA) generated within the driver. Brought out for external bypassing (~100 nF recommended) and for powering low-bias circuits such as digital isolators.
3 FLT output Active-low FAULT output that signals the main controller that a fault (DESAT, UVLO, or TSD) has been encountered and the output deactivated. Capable of driving opto-couplers or digital isolators (sink 20 mA / source 25 mA max).
4 DESAT input Desaturation-detection input for IGBT fault sensing. A capacitor to GND on this pin sets a programmable blanking delay every ON cycle before the DESAT fault is processed, preventing false triggering. Threshold V_DESAT-THR ≈ 6.35 V; blanking charge current ≈ 0.24 mA.
5 VCC power_in Positive bias supply for the driver. Operating range is from UVLO (~13.5 V startup) up to 20 V (absolute max 22 V). A good-quality bypass capacitor to GND is required and must be placed close to the pin.
6 VO output IGBT gate driver output. Sources +4 A / sinks -6 A peak into the IGBT gate (typ. 6.8 A sink, 7.8 A source at Rg = 0.1 Ω, VCC = 15 V, VEE = -8 V). VO is actively pulled low during start-up and under fault conditions.
7 GND power_in Device ground. Should connect to the IGBT emitter with a short trace. All power-pin bypass capacitors should be referenced to this pin and kept close to it.
8 CLAMP bidirectional Active Miller Clamp pin. Provides clamping for the IGBT gate during the off period to protect it from parasitic (Miller) turn-on. Clamp activates at V_MC-THR ≈ 2.0 V above GND and can sink 500 mA. Tie directly to the IGBT gate with minimum trace length for best results.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOIC-8
Category PMIC
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • NCV5701ADR2G
  • NCV5701BDR2G
  • NCV5701CDR2G

CAD (KiCad official)

  • Symbol: NCV5701ADR2G
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ncv5701adr2g-etched.step / ncv5701adr2g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncv5701adr2g.step / ncv5701adr2g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (22 pp, sha256 967fe6e8f755fee7, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF