← Commit history

Initial commit: component/ncv5701adr2g

Ray ·99fddbbab1 ·
2 files changed +85
README.mdadded+51
@@ -0,0 +1,51 @@+# NCV5701ADR2G++**onsemi** · Isolators - Gate Drivers · SOIC-8++NCV5701ADR2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VIN | input | Input signal to control the output. In galvanically isolated designs VIN is driven by an opto-coupler, pulse-transformer secondary, or digital-isolator output. VIN is internally clamped to 5.5 V and pulled up to VREF via a 1 MΩ resistor so the output stays low with no input. Signal is inverted from VIN to VO. Minimum pulse-width at VIN is required before VO is activated. |+| 2 | VREF | power_out | 5 V reference output (4.85-5.15 V, up to 20 mA) generated within the driver. Brought out for external bypassing (~100 nF recommended) and for powering low-bias circuits such as digital isolators. |+| 3 | FLT | output | Active-low FAULT output that signals the main controller that a fault (DESAT, UVLO, or TSD) has been encountered and the output deactivated. Capable of driving opto-couplers or digital isolators (sink 20 mA / source 25 mA max). |+| 4 | DESAT | input | Desaturation-detection input for IGBT fault sensing. A capacitor to GND on this pin sets a programmable blanking delay every ON cycle before the DESAT fault is processed, preventing false triggering. Threshold V_DESAT-THR ≈ 6.35 V; blanking charge current ≈ 0.24 mA. |+| 5 | VCC | power_in | Positive bias supply for the driver. Operating range is from UVLO (~13.5 V startup) up to 20 V (absolute max 22 V). A good-quality bypass capacitor to GND is required and must be placed close to the pin. |+| 6 | VO | output | IGBT gate driver output. Sources +4 A / sinks -6 A peak into the IGBT gate (typ. 6.8 A sink, 7.8 A source at Rg = 0.1 Ω, VCC = 15 V, VEE = -8 V). VO is actively pulled low during start-up and under fault conditions. |+| 7 | GND | power_in | Device ground. Should connect to the IGBT emitter with a short trace. All power-pin bypass capacitors should be referenced to this pin and kept close to it. |+| 8 | CLAMP | bidirectional | Active Miller Clamp pin. Provides clamping for the IGBT gate during the off period to protect it from parasitic (Miller) turn-on. Clamp activates at V_MC-THR ≈ 2.0 V above GND and can sink 500 mA. Tie directly to the IGBT gate with minimum trace length for best results. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | onsemi |+| Package | SOIC-8 |+| Category | PMIC |+| Pins | 8 |++## Ordering variants++Same part, different packaging or reel option.++- `NCV5701ADR2G`+- `NCV5701BDR2G`+- `NCV5701CDR2G`++## CAD (KiCad official)++- Symbol: `NCV5701ADR2G`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [onsemi datasheet](docs/ncv5701adr2g-datasheet.pdf) (22 pp, sha256 `967fe6e8f755fee7`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ncv5701adr2g-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "ncv5701adr2g",+  "version": "0.1.0",+  "type": "component",+  "description": "onsemi Isolators - Gate Drivers, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "ncv5701adr2g"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ncv5701adr2g.kicad_sym",+    "ncv5701adr2g.kicad_mod",+    "ncv5701adr2g.glb",+    "ncv5701adr2g.step",+    "ncv5701adr2g.lbr",+    "docs/hero.png",+    "docs/ncv5701adr2g-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file