← Commit history

ncv5701adr2g: factory component page (tier=lcsc)

Ray ·9752dcf5b0 · ·parent 3231e6b
1 file changed +130−8
page.json+130−8
@@ -1,13 +1,140 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "ncv5701adr2g",+  "title": "NCV5701ADR2G",+  "brief": "onsemi Isolators - Gate Drivers, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "onsemi Isolators - Gate Drivers, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "pmic",     "ncv5701adr2g"   ],+  "component": {+    "mpn": "NCV5701ADR2G",+    "manufacturer": "onsemi",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "PMIC",+    "subcategory": "Isolators - Gate Drivers",+    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2210210000_onsemi-NCV5701ADR2G_C603967.pdf",+    "parts": {+      "symbol": "ncv5701adr2g.kicad_sym",+      "footprint": "ncv5701adr2g.kicad_mod",+      "model_3d": "ncv5701adr2g.glb",+      "model_3d_step": "ncv5701adr2g.step",+      "lbr": "ncv5701adr2g.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "VIN",+        "type": "input",+        "description": "Input signal to control the output. In galvanically isolated designs VIN is driven by an opto-coupler, pulse-transformer secondary, or digital-isolator output. VIN is internally clamped to 5.5 V and pulled up to VREF via a 1 M\u03a9 resistor so the output stays low with no input. Signal is inverted from VIN to VO. Minimum pulse-width at VIN is required before VO is activated."+      },+      {+        "number": "2",+        "name": "VREF",+        "type": "power_out",+        "description": "5 V reference output (4.85-5.15 V, up to 20 mA) generated within the driver. Brought out for external bypassing (~100 nF recommended) and for powering low-bias circuits such as digital isolators."+      },+      {+        "number": "3",+        "name": "FLT",+        "type": "output",+        "description": "Active-low FAULT output that signals the main controller that a fault (DESAT, UVLO, or TSD) has been encountered and the output deactivated. Capable of driving opto-couplers or digital isolators (sink 20 mA / source 25 mA max)."+      },+      {+        "number": "4",+        "name": "DESAT",+        "type": "input",+        "description": "Desaturation-detection input for IGBT fault sensing. A capacitor to GND on this pin sets a programmable blanking delay every ON cycle before the DESAT fault is processed, preventing false triggering. Threshold V_DESAT-THR \u2248 6.35 V; blanking charge current \u2248 0.24 mA."+      },+      {+        "number": "5",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive bias supply for the driver. Operating range is from UVLO (~13.5 V startup) up to 20 V (absolute max 22 V). A good-quality bypass capacitor to GND is required and must be placed close to the pin."+      },+      {+        "number": "6",+        "name": "VO",+        "type": "output",+        "description": "IGBT gate driver output. Sources +4 A / sinks -6 A peak into the IGBT gate (typ. 6.8 A sink, 7.8 A source at Rg = 0.1 \u03a9, VCC = 15 V, VEE = -8 V). VO is actively pulled low during start-up and under fault conditions."+      },+      {+        "number": "7",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground. Should connect to the IGBT emitter with a short trace. All power-pin bypass capacitors should be referenced to this pin and kept close to it."+      },+      {+        "number": "8",+        "name": "CLAMP",+        "type": "bidirectional",+        "description": "Active Miller Clamp pin. Provides clamping for the IGBT gate during the off period to protect it from parasitic (Miller) turn-on. Clamp activates at V_MC-THR \u2248 2.0 V above GND and can sink 500 mA. Tie directly to the IGBT gate with minimum trace length for best results."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2210210000_onsemi-NCV5701ADR2G_C603967.pdf",+        "pages": 22,+        "sha256": "967fe6e8f755fee7",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "onsemi",+      "Package": "SOIC-8",+      "Category": "PMIC",+      "Pins": "8"+    }+  },+  "variants": [+    {+      "mpn": "NCV5701ADR2G",+      "kind": "packaging"+    },+    {+      "mpn": "NCV5701BDR2G",+      "kind": "unknown"+    },+    {+      "mpn": "NCV5701CDR2G",+      "kind": "unknown"+    }+  ],+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "ncv5701adr2g"+  ],+  "discovery_pitch": "NCV5701ADR2G (onsemi) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +152,5 @@     "docs/ncv5701adr2g-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file