main
Ray ncv57001dwr2g: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 9c6cf4f
{
  "schema_version": 1,
  "type": "component",
  "slug": "ncv57001dwr2g",
  "title": "NCV57001DWR2G",
  "brief": "onsemi Isolators - Gate Drivers, SOIC-16-300mil. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.2.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "pmic",
    "ncv57001dwr2g"
  ],
  "component": {
    "mpn": "NCV57001DWR2G",
    "manufacturer": "onsemi",
    "package": "SOIC-16-300mil",
    "pin_count": 16,
    "category": "PMIC",
    "subcategory": "Isolators - Gate Drivers",
    "datasheet": "https://www.onsemi.com/pdf/datasheet/ncv57001dwr2-d.pdf",
    "parts": {
      "symbol": "ncv57001dwr2g.kicad_sym",
      "footprint": "ncv57001dwr2g.kicad_mod",
      "model_3d": "ncv57001dwr2g-etched.glb",
      "model_3d_plain": "ncv57001dwr2g.glb",
      "model_3d_step": "ncv57001dwr2g-etched.step",
      "model_3d_step_plain": "ncv57001dwr2g.step",
      "lbr": "ncv57001dwr2g.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "VEE2A",
        "type": "power_in",
        "description": "Output-side negative power supply (mirror of VEE2). A quality bypass capacitor to GND2 close to the pin is required. Tie to GND2 for unipolar supply operation. Rated -10 V to +0.3 V vs GND2."
      },
      {
        "number": "2",
        "name": "DESAT",
        "type": "bidirectional",
        "description": "Desaturation detection input for IGBT short-circuit protection. An internal I_DESAT-CHG current source charges an external blanking capacitor each ON cycle. When DESAT exceeds V_DESAT-THR the output is driven low and /FLT is asserted. A 5 us mute time applies to IN+/IN- once DESAT trips."
      },
      {
        "number": "3",
        "name": "GND2",
        "type": "power_in",
        "description": "Output-side gate-drive reference; connects to IGBT emitter or FET source."
      },
      {
        "number": "4",
        "name": "N/C",
        "type": "unconnected",
        "description": "Not connected internally. Leave floating or tie to a nearby plane per PCB best practice."
      },
      {
        "number": "5",
        "name": "VDD2",
        "type": "power_in",
        "description": "Output-side positive power supply. Operating range from UVLO2 up to its maximum (25 V absolute max vs GND2). A quality bypass capacitor to GND2 placed close to the pin is required."
      },
      {
        "number": "6",
        "name": "OUT",
        "type": "output",
        "description": "Gate-driver output providing source/sink drive to the IGBT/FET gate (typ +4 A / -6 A peak). Actively pulled low during start-up and under fault conditions."
      },
      {
        "number": "7",
        "name": "CLAMP",
        "type": "bidirectional",
        "description": "Active Miller clamp pin that provides a low-impedance path for the IGBT/FET gate during OFF to prevent parasitic turn-on. An internal N-FET turns on when this pin drops below VEE2 + V_CLAMP-THR. Tie directly to the gate with minimum trace length. Max clamp current 2.5 A pk."
      },
      {
        "number": "8",
        "name": "VEE2",
        "type": "power_in",
        "description": "Output-side negative power supply. Tie to GND2 for unipolar operation, or bias to a negative rail (down to -10 V vs GND2) for negative gate-off drive. Requires bypass capacitor to GND2."
      },
      {
        "number": "9",
        "name": "GND1",
        "type": "power_in",
        "description": "Input-side (logic) ground reference. Both pin 9 and pin 16 are internally tied together and must be connected on the PCB."
      },
      {
        "number": "10",
        "name": "IN+",
        "type": "input",
        "description": "Non-inverting gate-driver input. Internally clamped to VDD1 with a 50 kOhm pull-down to ensure OUT is low with no input drive. Accepts 3.3 V / 5 V logic; minimum positive-going pulse width required at IN+ before OUT responds."
      },
      {
        "number": "11",
        "name": "IN-",
        "type": "input",
        "description": "Inverting gate-driver input. Internally clamped to VDD1 with a 50 kOhm pull-up to ensure OUT is low with no input drive. A minimum negative-going pulse width is required at IN- before OUT responds."
      },
      {
        "number": "12",
        "name": "RDY",
        "type": "output",
        "description": "Power-good (READY) indication output, active-high when VDD2 is good. Open-drain style with an internal 50 kOhm pull-up to VDD1; outputs from multiple drivers can be wired-OR. Max low-duration when triggered by UVLO2 is 200 ns; OUT stays low while RDY is low."
      },
      {
        "number": "13",
        "name": "/FLT",
        "type": "output",
        "description": "Fault output (active-low) indicating that the driver has detected a DESAT condition and disabled OUT. Open-drain compatible for wired-OR with a 10 mA max sink capability."
      },
      {
        "number": "14",
        "name": "/RST",
        "type": "input",
        "description": "Reset input, active-low, with an internal 50 kOhm pull-up to VDD1. Drive low to clear a latched DESAT fault."
      },
      {
        "number": "15",
        "name": "VDD1",
        "type": "power_in",
        "description": "Input-side (logic) power supply, 3.3 V to 5 V (6 V absolute max vs GND1). Bypass to GND1 with a quality decoupling capacitor."
      },
      {
        "number": "16",
        "name": "GND1A",
        "type": "power_in",
        "description": "Input-side ground reference (shared with pin 9 GND1 internally). Both ground pins must be connected on the PCB. Labelled GND1A on the package pin-assignment diagram."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://www.onsemi.com/pdf/datasheet/ncv57001dwr2-d.pdf",
        "pages": 22,
        "sha256": "c7c1197eac993e94",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ncv57001dwr2g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ncv57001dwr2g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "107053fffd8bddbc8996563e0f810e32d5310c33ffcdf4b92f5972bfe1e075e4",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "onsemi",
      "Package": "SOIC-16-300mil",
      "Category": "PMIC",
      "Pins": "16"
    }
  },
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ncv57001dwr2g"
  ],
  "discovery_pitch": "NCV57001DWR2G (onsemi) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ncv57001dwr2g.kicad_sym",
    "ncv57001dwr2g.kicad_mod",
    "ncv57001dwr2g.glb",
    "ncv57001dwr2g.step",
    "ncv57001dwr2g-etched.step",
    "ncv57001dwr2g.lbr",
    "docs/hero.png",
    "docs/ncv57001dwr2g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "variants": [
    {
      "mpn": "NCV57001DWR2G",
      "kind": "packaging"
    }
  ],
  "updated_at": "2026-09-25T03:06:31.130Z"
}