component
NCV57000DWR2G
Public Made by Adomby adom
onsemi Isolators - Gate Drivers, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+14−11@@ -44,7 +44,7 @@ "number": "2", "name": "DESAT", "type": "input",- "description": "IGBT desaturation detection input with internal charging current source IDESAT\u2212CHG; comparator threshold VDESAT\u2212THR = 9 V; 5 \u03bcs mute time after fault."+ "description": "IGBT desaturation detection input with internal charging current source IDESAT−CHG; comparator threshold VDESAT−THR = 9 V; 5 μs mute time after fault." }, { "number": "3",@@ -68,19 +68,19 @@ "number": "6", "name": "OUTL", "type": "output",- "description": "Low-side gate driver output providing \u22126 A sink current; actively pulled low during startup and fault conditions."+ "description": "Low-side gate driver output providing −6 A sink current; actively pulled low during startup and fault conditions." }, { "number": "7", "name": "CLAMP", "type": "bidirectional",- "description": "Miller clamp connected to IGBT gate; internal NFET clamps when voltage falls below VEE2 + VCLAMP\u2212THR."+ "description": "Miller clamp connected to IGBT gate; internal NFET clamps when voltage falls below VEE2 + VCLAMP−THR." }, { "number": "8", "name": "VEE2", "type": "power_in",- "description": "Output side negative power supply with range \u221210 to 0 V supporting down to \u22129 V capability."+ "description": "Output side negative power supply with range −10 to 0 V supporting down to −9 V capability." }, { "number": "9",@@ -92,31 +92,31 @@ "number": "10", "name": "IN+", "type": "input",- "description": "Non\u2212inverted logic input with 50 k\u03a9 pull\u2212down; internally clamped to VDD1; 40 ns minimum pulse width for guaranteed response."+ "description": "Non−inverted logic input with 50 kΩ pull−down; internally clamped to VDD1; 40 ns minimum pulse width for guaranteed response." }, { "number": "11",- "name": "IN\u2212",+ "name": "IN−", "type": "input",- "description": "Inverted logic input with 50 k\u03a9 pull\u2212up; internally clamped to VDD1; 40 ns minimum pulse width for guaranteed response."+ "description": "Inverted logic input with 50 kΩ pull−up; internally clamped to VDD1; 40 ns minimum pulse width for guaranteed response." }, { "number": "12", "name": "RDY", "type": "tri_state",- "description": "Power-good output (active high) with 50 k\u03a9 open-drain pull-up when both VDD1 and VDD2 supplies valid."+ "description": "Power-good output (active high) with 50 kΩ open-drain pull-up when both VDD1 and VDD2 supplies valid." }, { "number": "13", "name": "/FLT", "type": "tri_state",- "description": "Fault output (active low) with 50 k\u03a9 open-drain pull-up indicating IGBT desaturation condition."+ "description": "Fault output (active low) with 50 kΩ open-drain pull-up indicating IGBT desaturation condition." }, { "number": "14", "name": "/RST", "type": "input",- "description": "Fault reset input (active low) with 50 k\u03a9 pull-up; 800 ns minimum pulse width to reset fault latch."+ "description": "Fault reset input (active low) with 50 kΩ pull-up; 800 ns minimum pulse width to reset fault latch." }, { "number": "15",@@ -208,5 +208,8 @@ "docs/ncv57000dwr2g-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }