NCV57000DWR2G

@@ -59,7 +59,7 @@         "number": "2",         "name": "DESAT",         "type": "input",-        "description": "IGBT desaturation detection input with internal charging current source IDESAT\u2212CHG; comparator threshold VDESAT\u2212THR = 9 V; 5 \u03bcs mute time after fault."+        "description": "IGBT desaturation detection input with internal charging current source IDESAT−CHG; comparator threshold VDESAT−THR = 9 V; 5 μs mute time after fault."       },       {         "number": "3",@@ -83,19 +83,19 @@         "number": "6",         "name": "OUTL",         "type": "output",-        "description": "Low-side gate driver output providing \u22126 A sink current; actively pulled low during startup and fault conditions."+        "description": "Low-side gate driver output providing −6 A sink current; actively pulled low during startup and fault conditions."       },       {         "number": "7",         "name": "CLAMP",         "type": "bidirectional",-        "description": "Miller clamp connected to IGBT gate; internal NFET clamps when voltage falls below VEE2 + VCLAMP\u2212THR."+        "description": "Miller clamp connected to IGBT gate; internal NFET clamps when voltage falls below VEE2 + VCLAMP−THR."       },       {         "number": "8",         "name": "VEE2",         "type": "power_in",-        "description": "Output side negative power supply with range \u221210 to 0 V supporting down to \u22129 V capability."+        "description": "Output side negative power supply with range −10 to 0 V supporting down to −9 V capability."       },       {         "number": "9",@@ -107,31 +107,31 @@         "number": "10",         "name": "IN+",         "type": "input",-        "description": "Non\u2212inverted logic input with 50 k\u03a9 pull\u2212down; internally clamped to VDD1; 40 ns minimum pulse width for guaranteed response."+        "description": "Non−inverted logic input with 50 kΩ pull−down; internally clamped to VDD1; 40 ns minimum pulse width for guaranteed response."       },       {         "number": "11",-        "name": "IN\u2212",+        "name": "IN−",         "type": "input",-        "description": "Inverted logic input with 50 k\u03a9 pull\u2212up; internally clamped to VDD1; 40 ns minimum pulse width for guaranteed response."+        "description": "Inverted logic input with 50 kΩ pull−up; internally clamped to VDD1; 40 ns minimum pulse width for guaranteed response."       },       {         "number": "12",         "name": "RDY",         "type": "tri_state",-        "description": "Power-good output (active high) with 50 k\u03a9 open-drain pull-up when both VDD1 and VDD2 supplies valid."+        "description": "Power-good output (active high) with 50 kΩ open-drain pull-up when both VDD1 and VDD2 supplies valid."       },       {         "number": "13",         "name": "/FLT",         "type": "tri_state",-        "description": "Fault output (active low) with 50 k\u03a9 open-drain pull-up indicating IGBT desaturation condition."+        "description": "Fault output (active low) with 50 kΩ open-drain pull-up indicating IGBT desaturation condition."       },       {         "number": "14",         "name": "/RST",         "type": "input",-        "description": "Fault reset input (active low) with 50 k\u03a9 pull-up; 800 ns minimum pulse width to reset fault latch."+        "description": "Fault reset input (active low) with 50 kΩ pull-up; 800 ns minimum pulse width to reset fault latch."       },       {         "number": "15",@@ -180,6 +180,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "ncv57000dwr2g.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          9.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ncv57000dwr2g-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          9.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "a60007573544ced2c34e5bf2b8289a2c3314ff42e34fd70e8a63060102b70bef",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}