← Commit history
ncv4269ad150r2g: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+75−1
page.json+75−1@@ -33,5 +33,79 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "NCV4269AD150R2G",+ "manufacturer": "onsemi",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://www.onsemi.com/pdf/datasheet/ncv4269ad150r2-d.pdf",+ "parts": {+ "symbol": "ncv4269ad150r2g.kicad_sym",+ "footprint": "ncv4269ad150r2g.kicad_mod",+ "model_3d": "ncv4269ad150r2g-etched.glb",+ "model_3d_plain": "ncv4269ad150r2g.glb",+ "model_3d_step": "ncv4269ad150r2g-etched.step",+ "model_3d_step_plain": "ncv4269ad150r2g.step",+ "lbr": "ncv4269ad150r2g.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "I",+ "type": "power_in",+ "description": "Regulator input supply. Operating range 5.5 V to 45 V (5.0 V version), withstands +60 V transient and -40 V reverse. Connect to GND directly at the IC with a ceramic capacitor (typ. 0.1 μF to 470 nF)."+ },+ {+ "number": "2",+ "name": "SI",+ "type": "input",+ "description": "Sense Input to the on-chip voltage-monitor comparator. Typical threshold VSI,High = 1.31 V, VSI,Low = 1.20 V (bandgap-referenced); input current ±1 μA max. Drive from an external resistor divider off the monitored rail; if the sense function is not used, tie to Q."+ },+ {+ "number": "3",+ "name": "RADJ",+ "type": "input",+ "description": "Reset Threshold Adjust. External resistor divider from Q to RADJ programs the reset trip point down from the default 4.65 V typ. to as low as 3.5 V (VRADJ,TH = 1.35 V typ.). Tie to GND when the adjustment function is not used to keep the default threshold."+ },+ {+ "number": "4",+ "name": "D",+ "type": "passive",+ "description": "Reset Delay timing pin. Connect an external capacitor CD from D to GND to program the reset delay time td = CD·(VUD - VD,SAT)/ID,C (≈26 ms with 100 nF on the 5.0 V version, ID,C typ. 6.5 μA). Charges to VUD ≈1.8 V, discharges below VLD ≈0.45 V to assert reset."+ },+ {+ "number": "5",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground / signal return. All bypass capacitors reference this pin."+ },+ {+ "number": "6",+ "name": "RO",+ "type": "output",+ "description": "Reset Output. Open-collector NPN with internal 20 kΩ (typ.) pull-up to Q; VRO,SAT ≤ 0.4 V. Driven low during power-up and any time VQ falls below VRT (4.65 V typ.) or the RADJ-programmed threshold; remains valid down to VQ = 1.0 V. Leave open if unused."+ },+ {+ "number": "7",+ "name": "SO",+ "type": "output",+ "description": "Sense Output. Open-collector NPN with internal 20 kΩ (typ.) pull-up to Q; VSO,SAT ≤ 0.4 V. Goes low when SI drops below VSI,Low (1.20 V typ.) to give the microprocessor early warning of an impending reset. Leave open if unused."+ },+ {+ "number": "8",+ "name": "Q",+ "type": "power_out",+ "description": "Regulated 5.0 V output (±2.0%) capable of 150 mA. Dropout 0.5 V max at 100 mA. Connect a 10 μF (min 2.2 μF) capacitor to GND with ESR < 10 Ω for stability; ceramic X7R (e.g. Murata GRM31CR71A106KA01) is acceptable with no minimum ESR."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}