main
Ray
ncv308sn180t1g: laser-etched CAD + chip hero (factory 2.0.0 backfill)
80b4d6e
NCV308SN180T1G
onsemi · Supervisor And Reset ICs · SOT-23-6
NCV308SN180T1G from onsemi, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RESET | output | Active-low open-drain N-channel MOSFET RESET output. Driven low when SENSE is below the threshold voltage V_IT or when MR is pulled low; releases after the programmed reset delay once SENSE > V_IT and MR is high. Requires an external pull-up resistor (10 kΩ-1 MΩ recommended); low-level output voltage ≤ 0.3-0.4 V at 0.4-1.0 mA. |
| 2 | GND | power_in | Ground terminal. Connect to the PCB ground reference. |
| 3 | MR | input | Manual Reset input, active low. Pulling MR low forces RESET low. MR is internally tied to VDD through a ~90 kΩ pull-up resistor (R_MR), so it may be left floating if unused. V_IL ≤ 0.3·VDD, V_IH ≥ 0.7·VDD. |
| 4 | CT | passive | Reset Delay Time Setting pin. Connect a ground-referenced capacitor (≥100 pF) for a user-programmable reset delay (typ. 1.25 ms with 1 nF, up to ~10 s). Tying CT to VDD through a 40 kΩ-200 kΩ resistor or leaving it open selects fixed reset delay times. |
| 5 | SENSE | input | Sense (voltage-monitor) input. RESET is asserted when V_SENSE drops below the internal threshold V_IT (1.8 V nominal for the -180 fixed variant). Input current at SENSE is typ. 110 nA at 5.5 V for fixed versions. SENSE need not monitor VDD; it can monitor any voltage lower than VDD. |
| 6 | VDD | power_in | Supply voltage input, 1.6 V to 5.5 V operating range (absolute max 6.0 V). Place a 0.1 µF ceramic decoupling capacitor close to this pin. Quiescent supply current is typ. 1.6 µA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Ordering variants
Same part, different packaging or reel option.
NCV308SN180T1GNCV308SN180T1GSNADJNCV308SN180T1GSNXXX
CAD (KiCad official)
- Symbol:
NCV308SN180T1G - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
ncv308sn180t1g-etched.step/ncv308sn180t1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncv308sn180t1g.step/ncv308sn180t1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (11 pp, sha256
46e2541016bf2be0, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NCV308SN180T1G
**onsemi** · Supervisor And Reset ICs · SOT-23-6
NCV308SN180T1G from onsemi, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RESET | output | Active-low open-drain N-channel MOSFET RESET output. Driven low when SENSE is below the threshold voltage V_IT or when MR is pulled low; releases after the programmed reset delay once SENSE > V_IT and MR is high. Requires an external pull-up resistor (10 kΩ-1 MΩ recommended); low-level output voltage ≤ 0.3-0.4 V at 0.4-1.0 mA. |
| 2 | GND | power_in | Ground terminal. Connect to the PCB ground reference. |
| 3 | MR | input | Manual Reset input, active low. Pulling MR low forces RESET low. MR is internally tied to VDD through a ~90 kΩ pull-up resistor (R_MR), so it may be left floating if unused. V_IL ≤ 0.3·VDD, V_IH ≥ 0.7·VDD. |
| 4 | CT | passive | Reset Delay Time Setting pin. Connect a ground-referenced capacitor (≥100 pF) for a user-programmable reset delay (typ. 1.25 ms with 1 nF, up to ~10 s). Tying CT to VDD through a 40 kΩ-200 kΩ resistor or leaving it open selects fixed reset delay times. |
| 5 | SENSE | input | Sense (voltage-monitor) input. RESET is asserted when V_SENSE drops below the internal threshold V_IT (1.8 V nominal for the -180 fixed variant). Input current at SENSE is typ. 110 nA at 5.5 V for fixed versions. SENSE need not monitor VDD; it can monitor any voltage lower than VDD. |
| 6 | VDD | power_in | Supply voltage input, 1.6 V to 5.5 V operating range (absolute max 6.0 V). Place a 0.1 µF ceramic decoupling capacitor close to this pin. Quiescent supply current is typ. 1.6 µA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
## Ordering variants
Same part, different packaging or reel option.
- `NCV308SN180T1G`
- `NCV308SN180T1GSNADJ`
- `NCV308SN180T1GSNXXX`
## CAD (KiCad official)
- Symbol: `NCV308SN180T1G`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `ncv308sn180t1g-etched.step` / `ncv308sn180t1g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ncv308sn180t1g.step` / `ncv308sn180t1g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588931553393459200) (11 pp, sha256 `46e2541016bf2be0`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ncv308sn180t1g-datasheet.pdf)