main
Ray
Publish 0.1.0
ec9a565
NCV2250SN2T1G
onsemi · Pre-ordered transistors · TSOP-5
NCV2250SN2T1G from onsemi, in a TSOP-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Push-pull complementary output stage on the NCS2250/NCV2250 (the open-drain variant needs an external pull-up resistor). |
| 2 | VSS | power_in | Negative supply pin; connect to ground or negative rail, with a bypass capacitor of at least 0.1 μF as close as possible to the pin if not connected to ground. |
| 3 | IN+ | input | Non-inverting input, with a common mode range of VSS - 0.2 V to VDD + 0.2 V. |
| 4 | IN- | input | Inverting input, with a common mode range of VSS - 0.2 V to VDD + 0.2 V. |
| 5 | VDD | power_in | Positive supply pin for a 1.8 V to 5.5 V supply; connect to positive rail with a bypass capacitor of at least 0.1 μF as close as possible to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TSOP-5 |
| Category | Transistors |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range (VDD - VSS) | VS | 0 | 6 | V | 3 | ||
| Storage Temperature Range | Tstg | -65 | 150 | °C | 3 | ||
| Maximum Junction Temperature | TJ(max) | 150 | °C | 3 | |||
| Latch-up Current | ILU | 100 | mA | Per JESD78 (Note 6) | 3 | ||
| ESD Capability, Human Body Model | HBM | 2000 | V | Human Body Model | 3 | ||
| ESD Capability, Machine Model | MM | 50 | V | Machine Model | 3 | ||
| Power Supply Voltage | VS | 1.8 | 5.5 | V | 3 | ||
| Ambient Temperature | TA | -40 | 125 | °C | 3 | ||
| Quiescent Supply Current | IDD | 150 | 200 | μA | No load; VDD = 5 V | 4 | |
| Quiescent Supply Current (boldface) | IDD | 250 | μA | No load; VDD = 5 V; TA = -40 to 125 °C | 4 | ||
| Power Supply Rejection Ratio (boldface) | PSRR | 62.5 | dB | VDD = 5 V; TA = -40 to 125 °C | 4 | ||
| Input Offset Voltage | VOS | 0.5 | 6 | mV | VDD = 5 V | 4 | |
| Input Offset Voltage (boldface) | VOS | 6 | mV | VDD = 5 V; TA = -40 to 125 °C | 4 | ||
| Input Bias Current (boldface) | IIB | 1000 | pA | VDD = 5 V; TA = -40 to 125 °C | 4 | ||
| Input Offset Current (boldface) | IOS | 1000 | pA | VDD = 5 V; TA = -40 to 125 °C | 4 | ||
| Common Mode Rejection Ratio (boldface) | CMRR | 59 | dB | VDD = 5 V; TA = -40 to 125 °C | 4 | ||
| Propagation Delay, NCS2250 (push-pull) | tpLH, tpHL | 50 | 64 | ns | VOD = 100 mV; VDD = 5 V | 4 | |
| Quiescent Supply Current | IDD | 145 | 200 | μA | No load; VDD = 1.8 V | 5 | |
| Quiescent Supply Current (boldface) | IDD | 250 | μA | No load; VDD = 1.8 V; TA = -40 to 125 °C | 5 | ||
| Power Supply Rejection Ratio (boldface) | PSRR | 62.5 | dB | VDD = 1.8 V; TA = -40 to 125 °C | 5 | ||
| Input Offset Voltage | VOS | 0.5 | 6 | mV | VDD = 1.8 V | 5 | |
| Input Offset Voltage (boldface) | VOS | 6 | mV | VDD = 1.8 V; TA = -40 to 125 °C | 5 | ||
| Input Bias Current (boldface) | IIB | 1000 | pA | VDD = 1.8 V; TA = -40 to 125 °C | 5 | ||
| Input Offset Current (boldface) | IOS | 1000 | pA | VDD = 1.8 V; TA = -40 to 125 °C | 5 | ||
| Common Mode Rejection Ratio (boldface) | CMRR | 55 | dB | VDD = 1.8 V; TA = -40 to 125 °C | 5 | ||
| Propagation Delay, NCS2250 (push-pull) | tpLH, tpHL | 56 | 68 | ns | VOD = 100 mV; VDD = 1.8 V | 5 | |
| Power Supply Rejection Ratio | PSRR | 88 | dB | VDD = 5 V | 4 | ||
| Common Mode Rejection Ratio | CMRR | 81 | dB | VDD = 5 V | 4 | ||
| Input Bias Current | IIB | 20 | pA | VDD = 5 V | 4 | ||
| Input Offset Current | IOS | 20 | pA | VDD = 5 V | 4 | ||
| Input Capacitance | CIN | 3.8 | pF | VDD = 5 V | 4 | ||
| Output Current Capability, Sourcing (NCS2250) | IO | 48 | mA | Sourcing; VDD = 5 V | 4 | ||
| Output Current Capability, Sinking | IO | 52 | mA | Sinking; VDD = 5 V | 4 | ||
| Output Rise Time (NCS2250) | trise | 4 | ns | 10% to 90%, VOD = 100 mV; VDD = 5 V | 4 | ||
| Output Fall Time (NCS2250) | tfall | 4 | ns | 90% to 10%, VOD = 100 mV; VDD = 5 V | 4 | ||
| Propagation Delay, NCS2250 (push-pull) | tpLH, tpHL | 60 | ns | VOD = 50 mV; VDD = 5 V | 4 | ||
| Propagation Delay, NCS2250 (push-pull) | tpLH, tpHL | 90 | ns | VOD = 20 mV; VDD = 5 V | 4 | ||
| Propagation Delay Skew (NCS2250) | tSKEW | 6 | ns | VOD = 100 mV, CL = 50 pF; VDD = 5 V | 4 | ||
| Propagation Delay Skew (NCS2250) | tSKEW | 2 | ns | VOD = 50 mV, CL = 50 pF; VDD = 5 V | 4 | ||
| Propagation Delay Skew (NCS2250) | tSKEW | 1 | ns | VOD = 20 mV, CL = 50 pF; VDD = 5 V | 4 | ||
| Power Supply Rejection Ratio | PSRR | 82 | dB | VDD = 1.8 V | 5 | ||
| Common Mode Rejection Ratio | CMRR | 76 | dB | VDD = 1.8 V | 5 | ||
| Input Bias Current | IIB | 20 | pA | VDD = 1.8 V | 5 | ||
| Input Offset Current | IOS | 20 | pA | VDD = 1.8 V | 5 | ||
| Input Capacitance | CIN | 4.4 | pF | VDD = 1.8 V | 5 | ||
| Output Current Capability, Sourcing (NCS2250) | IO | 25 | mA | Sourcing; VDD = 1.8 V | 5 | ||
| Output Current Capability, Sinking | IO | 42 | mA | Sinking; VDD = 1.8 V | 5 | ||
| Output Rise Time (NCS2250) | trise | 7 | ns | 10% to 90%, VOD = 100 mV; VDD = 1.8 V | 5 | ||
| Output Fall Time (NCS2250) | tfall | 6 | ns | 90% to 10%, VOD = 100 mV; VDD = 1.8 V | 5 | ||
| Propagation Delay, NCS2250 (push-pull) | tpLH, tpHL | 71 | ns | VOD = 50 mV; VDD = 1.8 V | 5 | ||
| Propagation Delay, NCS2250 (push-pull) | tpLH, tpHL | 106 | ns | VOD = 20 mV; VDD = 1.8 V | 5 | ||
| Propagation Delay Skew (NCS2250) | tSKEW | 5 | ns | VOD = 100 mV, CL = 50 pF; VDD = 1.8 V | 5 | ||
| Propagation Delay Skew (NCS2250) | tSKEW | 2 | ns | VOD = 50 mV, CL = 50 pF; VDD = 1.8 V | 5 | ||
| Propagation Delay Skew (NCS2250) | tSKEW | 1 | ns | VOD = 20 mV, CL = 50 pF; VDD = 1.8 V | 5 | ||
| Junction-to-Ambient Thermal Resistance (TSOP-5) | JA | 150 | °C/W | Single layer 1S PCB, 1.0 oz copper, 50 mm² copper area | 3 |
CAD (KiCad official)
- Symbol:
NCV2250SN2T1G - Footprint:
Package_SO:TSOP-5_1.65x3.05mm_P0.95mm - 3D model: TSOP-5 (KiCad packages3D, STEP)
- 3D model files:
ncv2250sn2t1g-etched.step/ncv2250sn2t1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncv2250sn2t1g.step/ncv2250sn2t1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (12 pp, sha256
5600ff2f6674ceda, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NCV2250SN2T1G
**onsemi** · Pre-ordered transistors · TSOP-5
NCV2250SN2T1G from onsemi, in a TSOP-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Push-pull complementary output stage on the NCS2250/NCV2250 (the open-drain variant needs an external pull-up resistor). |
| 2 | VSS | power_in | Negative supply pin; connect to ground or negative rail, with a bypass capacitor of at least 0.1 μF as close as possible to the pin if not connected to ground. |
| 3 | IN+ | input | Non-inverting input, with a common mode range of VSS - 0.2 V to VDD + 0.2 V. |
| 4 | IN- | input | Inverting input, with a common mode range of VSS - 0.2 V to VDD + 0.2 V. |
| 5 | VDD | power_in | Positive supply pin for a 1.8 V to 5.5 V supply; connect to positive rail with a bypass capacitor of at least 0.1 μF as close as possible to the pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TSOP-5 |
| Category | Transistors |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range (VDD - VSS) | VS | 0 | | 6 | V | | 3 |
| Storage Temperature Range | Tstg | -65 | | 150 | °C | | 3 |
| Maximum Junction Temperature | TJ(max) | | | 150 | °C | | 3 |
| Latch-up Current | ILU | | | 100 | mA | Per JESD78 (Note 6) | 3 |
| ESD Capability, Human Body Model | HBM | | | 2000 | V | Human Body Model | 3 |
| ESD Capability, Machine Model | MM | | | 50 | V | Machine Model | 3 |
| Power Supply Voltage | VS | 1.8 | | 5.5 | V | | 3 |
| Ambient Temperature | TA | -40 | | 125 | °C | | 3 |
| Quiescent Supply Current | IDD | | 150 | 200 | μA | No load; VDD = 5 V | 4 |
| Quiescent Supply Current (boldface) | IDD | | | 250 | μA | No load; VDD = 5 V; TA = -40 to 125 °C | 4 |
| Power Supply Rejection Ratio (boldface) | PSRR | 62.5 | | | dB | VDD = 5 V; TA = -40 to 125 °C | 4 |
| Input Offset Voltage | VOS | | 0.5 | 6 | mV | VDD = 5 V | 4 |
| Input Offset Voltage (boldface) | VOS | | | 6 | mV | VDD = 5 V; TA = -40 to 125 °C | 4 |
| Input Bias Current (boldface) | IIB | | | 1000 | pA | VDD = 5 V; TA = -40 to 125 °C | 4 |
| Input Offset Current (boldface) | IOS | | | 1000 | pA | VDD = 5 V; TA = -40 to 125 °C | 4 |
| Common Mode Rejection Ratio (boldface) | CMRR | 59 | | | dB | VDD = 5 V; TA = -40 to 125 °C | 4 |
| Propagation Delay, NCS2250 (push-pull) | tpLH, tpHL | | 50 | 64 | ns | VOD = 100 mV; VDD = 5 V | 4 |
| Quiescent Supply Current | IDD | | 145 | 200 | μA | No load; VDD = 1.8 V | 5 |
| Quiescent Supply Current (boldface) | IDD | | | 250 | μA | No load; VDD = 1.8 V; TA = -40 to 125 °C | 5 |
| Power Supply Rejection Ratio (boldface) | PSRR | 62.5 | | | dB | VDD = 1.8 V; TA = -40 to 125 °C | 5 |
| Input Offset Voltage | VOS | | 0.5 | 6 | mV | VDD = 1.8 V | 5 |
| Input Offset Voltage (boldface) | VOS | | | 6 | mV | VDD = 1.8 V; TA = -40 to 125 °C | 5 |
| Input Bias Current (boldface) | IIB | | | 1000 | pA | VDD = 1.8 V; TA = -40 to 125 °C | 5 |
| Input Offset Current (boldface) | IOS | | | 1000 | pA | VDD = 1.8 V; TA = -40 to 125 °C | 5 |
| Common Mode Rejection Ratio (boldface) | CMRR | 55 | | | dB | VDD = 1.8 V; TA = -40 to 125 °C | 5 |
| Propagation Delay, NCS2250 (push-pull) | tpLH, tpHL | | 56 | 68 | ns | VOD = 100 mV; VDD = 1.8 V | 5 |
| Power Supply Rejection Ratio | PSRR | | 88 | | dB | VDD = 5 V | 4 |
| Common Mode Rejection Ratio | CMRR | | 81 | | dB | VDD = 5 V | 4 |
| Input Bias Current | IIB | | 20 | | pA | VDD = 5 V | 4 |
| Input Offset Current | IOS | | 20 | | pA | VDD = 5 V | 4 |
| Input Capacitance | CIN | | 3.8 | | pF | VDD = 5 V | 4 |
| Output Current Capability, Sourcing (NCS2250) | IO | | 48 | | mA | Sourcing; VDD = 5 V | 4 |
| Output Current Capability, Sinking | IO | | 52 | | mA | Sinking; VDD = 5 V | 4 |
| Output Rise Time (NCS2250) | trise | | 4 | | ns | 10% to 90%, VOD = 100 mV; VDD = 5 V | 4 |
| Output Fall Time (NCS2250) | tfall | | 4 | | ns | 90% to 10%, VOD = 100 mV; VDD = 5 V | 4 |
| Propagation Delay, NCS2250 (push-pull) | tpLH, tpHL | | 60 | | ns | VOD = 50 mV; VDD = 5 V | 4 |
| Propagation Delay, NCS2250 (push-pull) | tpLH, tpHL | | 90 | | ns | VOD = 20 mV; VDD = 5 V | 4 |
| Propagation Delay Skew (NCS2250) | tSKEW | | 6 | | ns | VOD = 100 mV, CL = 50 pF; VDD = 5 V | 4 |
| Propagation Delay Skew (NCS2250) | tSKEW | | 2 | | ns | VOD = 50 mV, CL = 50 pF; VDD = 5 V | 4 |
| Propagation Delay Skew (NCS2250) | tSKEW | | 1 | | ns | VOD = 20 mV, CL = 50 pF; VDD = 5 V | 4 |
| Power Supply Rejection Ratio | PSRR | | 82 | | dB | VDD = 1.8 V | 5 |
| Common Mode Rejection Ratio | CMRR | | 76 | | dB | VDD = 1.8 V | 5 |
| Input Bias Current | IIB | | 20 | | pA | VDD = 1.8 V | 5 |
| Input Offset Current | IOS | | 20 | | pA | VDD = 1.8 V | 5 |
| Input Capacitance | CIN | | 4.4 | | pF | VDD = 1.8 V | 5 |
| Output Current Capability, Sourcing (NCS2250) | IO | | 25 | | mA | Sourcing; VDD = 1.8 V | 5 |
| Output Current Capability, Sinking | IO | | 42 | | mA | Sinking; VDD = 1.8 V | 5 |
| Output Rise Time (NCS2250) | trise | | 7 | | ns | 10% to 90%, VOD = 100 mV; VDD = 1.8 V | 5 |
| Output Fall Time (NCS2250) | tfall | | 6 | | ns | 90% to 10%, VOD = 100 mV; VDD = 1.8 V | 5 |
| Propagation Delay, NCS2250 (push-pull) | tpLH, tpHL | | 71 | | ns | VOD = 50 mV; VDD = 1.8 V | 5 |
| Propagation Delay, NCS2250 (push-pull) | tpLH, tpHL | | 106 | | ns | VOD = 20 mV; VDD = 1.8 V | 5 |
| Propagation Delay Skew (NCS2250) | tSKEW | | 5 | | ns | VOD = 100 mV, CL = 50 pF; VDD = 1.8 V | 5 |
| Propagation Delay Skew (NCS2250) | tSKEW | | 2 | | ns | VOD = 50 mV, CL = 50 pF; VDD = 1.8 V | 5 |
| Propagation Delay Skew (NCS2250) | tSKEW | | 1 | | ns | VOD = 20 mV, CL = 50 pF; VDD = 1.8 V | 5 |
| Junction-to-Ambient Thermal Resistance (TSOP-5) | JA | | 150 | | °C/W | Single layer 1S PCB, 1.0 oz copper, 50 mm² copper area | 3 |
## CAD (KiCad official)
- Symbol: `NCV2250SN2T1G`
- Footprint: `Package_SO:TSOP-5_1.65x3.05mm_P0.95mm`
- 3D model: TSOP-5 (KiCad packages3D, STEP)
- 3D model files: `ncv2250sn2t1g-etched.step` / `ncv2250sn2t1g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ncv2250sn2t1g.step` / `ncv2250sn2t1g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/ncv2250sn2t1-d.pdf) (12 pp, sha256 `5600ff2f6674ceda`, retrieved 2026-11-05, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ncv2250sn2t1g-datasheet.pdf)