component
NCV20064DTBR2G
Public Made by Adomby adom
onsemi Operational Amplifier, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNCV20064DTBR2G
onsemi · Operational Amplifier · TSSOP-14
NCV20064DTBR2G from onsemi, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT 1 | output | Output of op amp channel 1, which swings rail-to-rail between VSS and VDD. |
| 2 | IN− 1 | input | Inverting input of op amp channel 1, with the common-mode range specified as VSS − 0.2 V to VDD + 0.2 V. |
| 3 | IN+ 1 | input | Non-inverting input of op amp channel 1, with the common-mode range specified as VSS − 0.2 V to VDD + 0.2 V. |
| 4 | VDD | power_in | Positive supply rail; operating supply voltage VS = VDD − VSS is 1.8 V to 5.5 V, and the absolute maximum is 6 V. |
| 5 | IN+ 2 | input | Non-inverting input of op amp channel 2, with the common-mode range specified as VSS − 0.2 V to VDD + 0.2 V. |
| 6 | IN− 2 | input | Inverting input of op amp channel 2, with the common-mode range specified as VSS − 0.2 V to VDD + 0.2 V. |
| 7 | OUT 2 | output | Output of op amp channel 2, which swings rail-to-rail between VSS and VDD. |
| 8 | OUT 3 | output | Output of op amp channel 3, which swings rail-to-rail between VSS and VDD. |
| 9 | IN− 3 | input | Inverting input of op amp channel 3, with the common-mode range specified as VSS − 0.2 V to VDD + 0.2 V. |
| 10 | IN+ 3 | input | Non-inverting input of op amp channel 3, with the common-mode range specified as VSS − 0.2 V to VDD + 0.2 V. |
| 11 | VSS | power_in | Negative supply rail (ground in single-supply use); the reference for VS = VDD − VSS and the input common-mode range. |
| 12 | IN+ 4 | input | Non-inverting input of op amp channel 4, with the common-mode range specified as VSS − 0.2 V to VDD + 0.2 V. |
| 13 | IN− 4 | input | Inverting input of op amp channel 4, with the common-mode range specified as VSS − 0.2 V to VDD + 0.2 V. |
| 14 | OUT 4 | output | Output of op amp channel 4, which swings rail-to-rail between VSS and VDD. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TSSOP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | 0.5 | 3.5 | mV | VS = 1.8 V; TA = 25°C; RL ≥ 10 k; VCM = VOUT = mid-supply | 5 | |
| Input Offset Voltage (boldface, over temperature) | VOS | 4 | mV | VS = 1.8 V; TA = −40°C to 125°C | 5 | ||
| Input Bias Current (boldface, over temperature) | IIB | 1500 | pA | VS = 1.8 V; TA = −40°C to 125°C | 5 | ||
| Input Offset Current (boldface, over temperature) | IOS | 1100 | pA | VS = 1.8 V; TA = −40°C to 125°C | 5 | ||
| Common Mode Rejection Ratio | CMRR | 48 | 73 | dB | VS = 1.8 V; VCM = VSS, 0.2 to VDD + 0.2 | 5 | |
| Common Mode Rejection Ratio | CMRR | 45 | dB | VS = 1.8 V; VCM = VSS + 0.2 to VDD − 0.2 | 5 | ||
| Open Loop Voltage Gain | AVOL | 86 | 120 | dB | VS = 1.8 V; TA = 25°C; RL ≥ 10 k | 5 | |
| Open Loop Voltage Gain (boldface, over temperature) | AVOL | 80 | dB | VS = 1.8 V; TA = −40°C to 125°C | 5 | ||
| Output Voltage High (voltage swing from positive rail) | VOH | 3 | 19 | mV | VS = 1.8 V; VOH = VDD − VOUT | 5 | |
| Output Voltage High (boldface, over temperature) | VOH | 20 | mV | VS = 1.8 V; VOH = VDD − VOUT; TA = −40°C to 125°C | 5 | ||
| Output Voltage Low (voltage swing from negative rail) | VOL | 3 | 19 | mV | VS = 1.8 V; VOL = VOUT − VSS | 5 | |
| Output Voltage Low (boldface, over temperature) | VOL | 20 | mV | VS = 1.8 V; VOL = VOUT − VSS; TA = −40°C to 125°C | 5 | ||
| Power Supply Rejection Ratio | PSRR | 67 | 90 | dB | VS = 1.8 V; No Load | 5 | |
| Power Supply Rejection Ratio (boldface, over temperature) | PSRR | 64 | dB | VS = 1.8 V; No Load; TA = −40°C to 125°C | 5 | ||
| Power Supply Quiescent Current (per channel) | IDD | 125 | 170 | A | VS = 1.8 V; Per channel, no load | 5 | |
| Input Offset Voltage | VOS | 0.5 | 3.5 | mV | VS = 3.3 V; TA = 25°C; RL ≥ 10 k; VCM = VOUT = mid-supply | 6 | |
| Input Offset Voltage (boldface, over temperature) | VOS | 4 | mV | VS = 3.3 V; TA = −40°C to 125°C | 6 | ||
| Input Bias Current (boldface, over temperature) | IIB | 1500 | pA | VS = 3.3 V; TA = −40°C to 125°C | 6 | ||
| Input Offset Current (boldface, over temperature) | IOS | 1100 | pA | VS = 3.3 V; TA = −40°C to 125°C | 6 | ||
| Common Mode Rejection Ratio | CMRR | 53 | 76 | dB | VS = 3.3 V; VCM = VSS, 0.2 to VDD + 0.2 | 6 | |
| Common Mode Rejection Ratio | CMRR | 48 | dB | VS = 3.3 V; VCM = VSS + 0.2 to VDD − 0.2 | 6 | ||
| Open Loop Voltage Gain | AVOL | 90 | 120 | dB | VS = 3.3 V; TA = 25°C; RL ≥ 10 k | 6 | |
| Open Loop Voltage Gain (boldface, over temperature) | AVOL | 86 | dB | VS = 3.3 V; TA = −40°C to 125°C | 6 | ||
| Output Voltage High (voltage swing from positive rail) | VOH | 3 | 24 | mV | VS = 3.3 V; VOH = VDD − VOUT | 6 | |
| Output Voltage High (boldface, over temperature) | VOH | 25 | mV | VS = 3.3 V; VOH = VDD − VOUT; TA = −40°C to 125°C | 6 | ||
| Output Voltage Low (voltage swing from negative rail) | VOL | 3 | 24 | mV | VS = 3.3 V; VOL = VOUT − VSS | 6 | |
| Output Voltage Low (boldface, over temperature) | VOL | 25 | mV | VS = 3.3 V; VOL = VOUT − VSS; TA = −40°C to 125°C | 6 | ||
| Power Supply Rejection Ratio | PSRR | 67 | 90 | dB | VS = 3.3 V; No Load | 6 | |
| Power Supply Rejection Ratio (boldface, over temperature) | PSRR | 64 | dB | VS = 3.3 V; No Load; TA = −40°C to 125°C | 6 | ||
| Power Supply Quiescent Current (per channel) | IDD | 135 | 180 | A | VS = 3.3 V; Per channel, no load | 6 | |
| Input Offset Voltage | VOS | 0.5 | 3.5 | mV | VS = 5.5 V; TA = 25°C; RL ≥ 10 k; VCM = VOUT = mid-supply | 7 | |
| Input Offset Voltage (boldface, over temperature) | VOS | 4 | mV | VS = 5.5 V; TA = −40°C to 125°C | 7 | ||
| Input Bias Current (boldface, over temperature) | IIB | 1500 | pA | VS = 5.5 V; TA = −40°C to 125°C | 7 | ||
| Input Offset Current (boldface, over temperature) | IOS | 1100 | pA | VS = 5.5 V; TA = −40°C to 125°C | 7 | ||
| Common Mode Rejection Ratio | CMRR | 55 | 79 | dB | VS = 5.5 V; VCM = VSS, 0.2 to VDD + 0.2 | 7 | |
| Common Mode Rejection Ratio | CMRR | 51 | dB | VS = 5.5 V; VCM = VSS + 0.2 to VDD − 0.2 | 7 | ||
| Open Loop Voltage Gain | AVOL | 90 | 120 | dB | VS = 5.5 V; TA = 25°C; RL ≥ 10 k | 7 | |
| Open Loop Voltage Gain (boldface, over temperature) | AVOL | 86 | dB | VS = 5.5 V; TA = −40°C to 125°C | 7 | ||
| Output Voltage High (voltage swing from positive rail) | VOH | 3 | 24 | mV | VS = 5.5 V; VOH = VDD − VOUT | 7 | |
| Output Voltage High (boldface, over temperature) | VOH | 25 | mV | VS = 5.5 V; VOH = VDD − VOUT; TA = −40°C to 125°C | 7 | ||
| Output Voltage Low (voltage swing from negative rail) | VOL | 3 | 24 | mV | VS = 5.5 V; VOL = VOUT − VSS | 7 | |
| Output Voltage Low (boldface, over temperature) | VOL | 25 | mV | VS = 5.5 V; VOL = VOUT − VSS; TA = −40°C to 125°C | 7 | ||
| Power Supply Rejection Ratio | PSRR | 67 | 90 | dB | VS = 5.5 V; No Load | 7 | |
| Power Supply Rejection Ratio (boldface, over temperature) | PSRR | 64 | dB | VS = 5.5 V; No Load; TA = −40°C to 125°C | 7 | ||
| Power Supply Quiescent Current (per channel) | IDD | 140 | 200 | A | VS = 5.5 V; Per channel, no load | 7 | |
| Supply Voltage (VDD − VSS) | VS | 6 | V | 4 | |||
| Input Current (maximum) | II | -10 | 10 | mA | 4 | ||
| Output Current (maximum) | IO | -100 | 100 | mA | 4 | ||
| Continuous Total Power Dissipation | PD | 200 | mW | Note 2 | 4 | ||
| Maximum Junction Temperature | TJ | 150 | °C | 4 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 4 | ||
| Mounting Temperature | Tmount | 260 | °C | Infrared or convection, 20 sec | 4 | ||
| ESD Capability, Human Body Model | ESDHBM | 2000 | V | Human Body Model, JS-001-2017 (AEC-Q100-002) | 4 | ||
| ESD Capability, Charged Device Model | ESDCDM | 2000 | V | Charged Device Model, JS-002-2014 (AEC-Q100-011) | 4 | ||
| Supply Voltage (VDD − VSS) | VS | 1.8 | 5.5 | V | 4 | ||
| Ambient Temperature | TA | -40 | 125 | °C | 4 | ||
| Junction to Ambient Thermal Resistance (TSSOP-14, single layer board) | JA | 178 | °C/W | Single layer board (Note 6) | 4 | ||
| Junction to Ambient Thermal Resistance (TSSOP-14, multi-layer board) | JA | 140 | °C/W | Multi-layer board (Note 7) | 4 |
CAD (KiCad official)
- Symbol:
NCV20064DTBR2G - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
ncv20064dtbr2g-etched.step/ncv20064dtbr2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncv20064dtbr2g.step/ncv20064dtbr2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (27 pp, sha256
af5e67abd5b8d2a3, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).