3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNCS32100XMNTXG
onsemi · Specialized Sensors · QFN-40(5x5)
NCS32100XMNTXG from onsemi, in a QFN-40(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LC2 | bidirectional | Oscillator coil drive output, connected to the excitation coil and matching capacitors. |
| 2 | LC1 | bidirectional | Oscillator coil drive output, connected to the excitation coil and matching capacitors. |
| 3 | V5VO | power_out | LC oscillator power supply output, connected to V5VA. |
| 4 | NC | unconnected | No connect; datasheet recommends connecting to ground. |
| 5 | VCC | power_in | Primary 5 V supply (2.75 V to 5.5 V operating), connect to the supply with a 10 µF bypass capacitor. |
| 6 | V5VA | power_out | 3 V/5 V supply for the internal LC oscillator, connect to a local 10 µF bypass capacitor. |
| 7 | NC | unconnected | No connect; datasheet recommends connecting to ground. |
| 8 | VBAT | power_in | Optional 3 V backup battery supply (2.75 V to 4.2 V) with a 100 µF bypass capacitor; connect to ground through 20 kΩ if not using battery backup. |
| 9 | V2VD | power_out | Digital supply observation pin, connect to a 1 µF bypass capacitor. |
| 10 | GND | power_in | Ground, 0 V return connected to module ground. |
| 11 | NC | unconnected | No connect; datasheet recommends connecting to ground. |
| 12 | NC | unconnected | No connect; datasheet recommends connecting to ground. |
| 13 | GND | power_in | Ground, 0 V return connected to module ground. |
| 14 | GND | power_in | Ground, 0 V return connected to module ground. |
| 15 | V2VD | power_out | Digital supply observation pin, connect to a 1 µF bypass capacitor. |
| 16 | VDDIO | power_in | I/O power supply for the Data[3:0] pins, 3 V to 5 V, connected to the external RS-485 driver supply. |
| 17 | Data3 | bidirectional | Configurable digital I/O; RX, data from external master to the NCS32100. |
| 18 | Data2 | bidirectional | Configurable digital I/O; TX, data from the NCS32100 to the external master. |
| 19 | Data1 | bidirectional | Configurable digital I/O; available as a GPIO. |
| 20 | Data0 | bidirectional | Configurable digital I/O; TX_EN, enable signal for the external RS-485 transceiver. |
| 21 | GND | power_in | Ground, 0 V return connected to module ground. |
| 22 | V2VD | power_out | Digital supply observation pin, connect to a 1 µF bypass capacitor. |
| 23 | SWDIO | input | Serial Wire data pin for MCU firmware programming; connect to ground when not programming. |
| 24 | SWCLK | input | Serial Wire clock pin for MCU firmware programming; connect to ground when not programming. |
| 25 | DBG_EN | input | MCU debug enable; assert high to program/debug the internal MCU, low (ground) when not in use. |
| 26 | NC | unconnected | No connect; datasheet recommends connecting to ground. |
| 27 | GND | power_in | Ground, 0 V return connected to module ground. |
| 28 | V2VAR | power_out | Internally regulated analog power output, connect to V2VATL with a 1 µF capacitor. |
| 29 | GND | power_in | Ground, 0 V return connected to module ground. |
| 30 | DC | input | Receiver coil DC bias, connect to ground through a 0.1 µF capacitor. |
| 31 | REC7 | bidirectional | Receiver coil 7 input for fine or coarse coil connection (set via internal registers); receiver signal 0.015 to 0.120 Vpp. |
| 32 | REC6 | bidirectional | Receiver coil 6 input for fine or coarse coil connection (set via internal registers); receiver signal 0.015 to 0.120 Vpp. |
| 33 | REC5 | bidirectional | Receiver coil 5 input for fine or coarse coil connection (set via internal registers); receiver signal 0.015 to 0.120 Vpp. |
| 34 | REC4 | bidirectional | Receiver coil 4 input for fine or coarse coil connection (set via internal registers); receiver signal 0.015 to 0.120 Vpp. |
| 35 | REC3 | bidirectional | Receiver coil 3 input for fine or coarse coil connection (set via internal registers); receiver signal 0.015 to 0.120 Vpp. |
| 36 | REC2 | bidirectional | Receiver coil 2 input for fine or coarse coil connection (set via internal registers); receiver signal 0.015 to 0.120 Vpp. |
| 37 | REC1 | bidirectional | Receiver coil 1 input for fine or coarse coil connection (set via internal registers); receiver signal 0.015 to 0.120 Vpp. |
| 38 | REC0 | bidirectional | Receiver coil 0 input for fine or coarse coil connection (set via internal registers); receiver signal 0.015 to 0.120 Vpp. |
| 39 | V2VATL | power_in | Analog supply input, supplied by external connection to V2VAR, with a 0.1 µF bypass capacitor. |
| 40 | GND | power_in | Ground, 0 V return connected to module ground. |
| 41 | GND | power_in | Ground, 0 V return connected to module ground (listed as pin 41, beyond the 40 leads). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | QFN-40(5x5) |
| Category | Sensors |
| Pins | 41 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VCC | -0.3 | 6 | V | 4 | ||
| VBAT Voltage Range | VBAT | -0.3 | 6 | V | 4 | ||
| Storage Temperature Range | TSTG | -40 | 150 | °C | 4 | ||
| Lead Temperature, Soldering | TSLD | 260 | °C | 10 Sec. | 4 | ||
| ESD Capability, Human Body Model | ESDHBM | 2 | kV | TA = 25°C, JS-001-2017 | 4 | ||
| ESD Capability, Charged Device Model | ESDCDM | 0.5 | kV | TA = 25°C, JS-002-2018 | 4 | ||
| Latch-up Current Immunity | LU | 100 | mA | TA = 25°C, JESD78 | 4 | ||
| Excitation Frequency Range | FOSC | 3 | 4 | 6 | MHz | 4 | |
| VCC | VCC | 2.75 | 5 | 5.5 | V | 4 | |
| VBAT | VIN | 2.75 | 3.3 | 4.2 | V | 4 | |
| VCC - VBAT | VNOM | 0.3 | 0.7 | 5.5 | V | Voltage difference required to stay in normal mode | 4 |
| REC Pins Input Voltage Amplitude | VREC | 0.015 | 0.12 | Vpp | Peak to peak | 4 | |
| Ambient Temperature | TA | -40 | 85 | °C | 4 | ||
| Junction Temperature | TJ | -40 | 105 | °C | 4 | ||
| Supply Battery Mode Current | ISTBY | 0.2 | 2 | 5 | mA | VCC = 0 V, VBAT = 3.3 V | 4 |
| Supply Dynamic Current | IDYN | 82 | 90 | 133 | mA | VCC = 5.0 V | 4 |
| Thermal Resistance, Junction-to-Ambient, Steady State | RJA | 32 | °C/W | Surface-mounted on FR4 board, minimum recommended pad size, 1 oz Cu | 4 | ||
| Thermal Resistance, Junction-to-Case (VIN Paddle) | RJC | 0.98 | °C/W | 4 | |||
| VBAT DC reverse current | IVBAT | 1 | A | VCC = 5 V, VBAT = 3.3 V, T = 85°C | 4 | ||
| Data[3:0] Pin Drive Strength | 2 | mA | VCC = 5.0 V | 4 |
CAD (KiCad official)
- Symbol:
NCS32100XMNTXG - Footprint:
Package_DFN_QFN:QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm - 3D model: QFN-40(5x5) (KiCad packages3D, STEP)
- 3D model files:
ncs32100xmntxg-etched.step/ncs32100xmntxg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncs32100xmntxg.step/ncs32100xmntxg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (29 pp, sha256
13997cdca436d81e, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).