Generated by kicad-footprint-generator · KiCad file format 20260206
NCS21914DR2G
onsemi · Precision Op Amps · SOIC-14
NCS21914DR2G from onsemi, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Amplifier 1 output. Rail-to-rail output stage, swings within ~10 mV of the supply rails; short-circuit current typ. 16 mA sourcing / 18 mA sinking; drives up to 1 nF capacitive load. |
| 2 | IN-1 | input | Amplifier 1 inverting input. High-impedance CMOS input; input bias current typ. ±100 pA; input diode-clamped to supply rails through 1.65 kΩ (limit input current to ±10 mA). |
| 3 | IN+1 | input | Amplifier 1 non-inverting input. Common-mode range VSS to VDD-1.5 V; CMRR typ. 150 dB at VS = 36 V; ESD/latch-up protected inputs. |
| 4 | VDD | power_in | Positive supply pin, shared by all four amplifiers. Operating range 4 V to 36 V (VDD-VSS ≤ 40 V absolute max). Quiescent current typ. 475 µA / max 570 µA per channel. Bypass with a local 0.1 µF ceramic close to the pin. |
| 5 | IN+2 | input | Amplifier 2 non-inverting input. Common-mode range VSS to VDD-1.5 V; input impedance is very high (CMOS gate). |
| 6 | IN-2 | input | Amplifier 2 inverting input. High-impedance input; differential input voltage limited to ±17 V by internal clamp diodes with 1.65 kΩ series protection. |
| 7 | OUT2 | output | Amplifier 2 output. Rail-to-rail; VOH/VOL typ. 100 mV from rail with 10 kΩ load; slew rate typ. 1.6 V/µs. |
| 8 | OUT3 | output | Amplifier 3 output. Rail-to-rail output; short-circuit protected; drives up to 1 nF cap load. |
| 9 | IN-3 | input | Amplifier 3 inverting input. High-impedance CMOS input; internal input protection diodes to VDD/VSS with 1.65 kΩ series (limit external input current to ±10 mA). |
| 10 | IN+3 | input | Amplifier 3 non-inverting input. Common-mode range VSS to VDD-1.5 V. |
| 11 | VSS | power_in | Negative supply / ground pin, shared by all four amplifiers. Total supply (VDD-VSS) 4 V to 36 V operating, 40 V absolute max. In single-supply designs tie to GND. |
| 12 | IN+4 | input | Amplifier 4 non-inverting input. Common-mode range VSS to VDD-1.5 V; CMOS high-impedance input. |
| 13 | IN-4 | input | Amplifier 4 inverting input. High-impedance input; internal ESD/latch-up protection. |
| 14 | OUT4 | output | Amplifier 4 output. Rail-to-rail; open-loop gain typ. 150 dB; output impedance behavior per Figure 23. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Ordering variants
Same part, different packaging or reel option.
NCS21914DR2GNCS21914DR2GNCV21914DR2GNCS21914DTBR2GNCS21914DR2GNCV21914DTBR2G
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Offset Voltage | VOS | -25 | 1 | 25 | V | 4 | |
| Offset Voltage Drift vs Temp | VOS/T | -0.085 | 0.02 | 0.085 | V/°C | 4 | |
| Input Bias Current | IIB | -500 | 100 | 500 | pA | 4 | |
| Input Bias Current (boldface, over temperature) | IIB | -3500 | 3500 | pA | Boldface: TA = –40°C to 125°C | 4 | |
| Input Offset Current | IOS | -500 | 200 | 500 | pA | 4 | |
| Input Offset Current (boldface, over temperature) | IOS | -3500 | 3500 | pA | Boldface: TA = –40°C to 125°C | 4 | |
| Common Mode Rejection Ratio | CMRR | 140 | 150 | dB | VSS ≤ VCM ≤ VDD−1.5 V, VS = 36 V | 4 | |
| Common Mode Rejection Ratio (boldface, over temperature) | CMRR | 130 | dB | Boldface: TA = –40°C to 125°C, VS = 36 V | 4 | ||
| Common Mode Rejection Ratio | CMRR | 130 | 150 | dB | VSS ≤ VCM ≤ VDD−1.5 V, VS = 12 V (Note 8) | 4 | |
| Common Mode Rejection Ratio (boldface, over temperature) | CMRR | 120 | dB | Boldface: TA = –40°C to 125°C, VS = 12 V (Note 8) | 4 | ||
| Common Mode Rejection Ratio | CMRR | 130 | 140 | dB | VSS ≤ VCM ≤ VDD−1.5 V, VS = 8 V (Note 8) | 4 | |
| Common Mode Rejection Ratio | CMRR | 120 | 130 | dB | VSS ≤ VCM ≤ VDD−1.5 V, VS = 4 V | 4 | |
| Common Mode Rejection Ratio (boldface, over temperature) | CMRR | 110 | dB | Boldface: TA = –40°C to 125°C, VS = 4 V | 4 | ||
| Open Loop Voltage Gain | AVOL | 130 | 150 | dB | VSS + 0.5 V < VO < VDD – 0.5 V | 4 | |
| Open Loop Voltage Gain (boldface, over temperature) | AVOL | 125 | 135 | dB | Boldface: TA = –40°C to 125°C, VSS + 0.5 V < VO < VDD – 0.5 V | 4 | |
| Output Voltage High, Referenced to Rail | VOH | 5 | 10 | mV | No Load | 4 | |
| Output Voltage High, Referenced to Rail | VOH | 100 | 210 | mV | RL = 10 k | 4 | |
| Output Voltage High, Referenced to Rail (boldface, over temperature) | VOH | 140 | 250 | mV | Boldface: TA = –40°C to 125°C, RL = 10 k | 4 | |
| Output Voltage Low, Referenced to Rail | VOL | 5 | 10 | mV | No Load | 4 | |
| Output Voltage Low, Referenced to Rail | VOL | 100 | 210 | mV | RL = 10 k | 4 | |
| Output Voltage Low, Referenced to Rail (boldface, over temperature) | VOL | 140 | 250 | mV | Boldface: TA = –40°C to 125°C, RL = 10 k | 4 | |
| Power Supply Rejection Ratio | PSRR | 0.02 | 0.3 | V/V | VS = 4 V to 36 V | 5 | |
| Power Supply Rejection Ratio | PSRR | 130 | 154 | dB | VS = 4 V to 36 V | 5 | |
| Quiescent Current | IQ | 475 | 570 | A | Per channel | 5 | |
| Quiescent Current (boldface, over temperature) | IQ | 570 | A | Boldface: TA = –40°C to 125°C, per channel | 5 | ||
| Supply Voltage (VDD − VSS) | VS | 40 | V | 3 | |||
| Differential Input Voltage | VID | -17 | 17 | V | Note 2: inputs diode connected with 1.65 kΩ total input protection | 3 | |
| Input Current | II | -10 | 10 | mA | Notes 1 and 2 | 3 | |
| Operating Temperature | TA | -40 | 125 | °C | 3 | ||
| Storage Temperature | TSTG | -65 | 150 | °C | 3 | ||
| Junction Temperature | TJ | 150 | °C | 3 | |||
| ESD Human Body Model (HBM) | ESD HBM | 3000 | V | JS-001-2017 (AEC-Q100-002) | 3 | ||
| ESD Charged Device Model (CDM) | ESD CDM | 2000 | V | JS-002-2014 (AEC-Q100-011) | 3 | ||
| Latch-up Current | ILU | 100 | mA | JESD78E (AEC-Q100-004) | 3 | ||
| Supply Voltage (VDD − VSS) | VS | 4 | 36 | V | 3 | ||
| Specified Operating Temperature Range | TA | -40 | 125 | °C | 3 | ||
| Differential Voltage | VDIFF | -17 | 17 | V | Note 7 | 3 | |
| Thermal Resistance, Junction to Ambient (SOIC-14) | JA | 59 | °C/W | As mounted on 80x80x1.5 mm FR4 PCB, 2S2P, 2 oz copper, 200 mm² heat spreader, JESD51-7 | 3 |
CAD (KiCad official)
- Symbol:
NCS21914DR2G - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
ncs21914dr2g-etched.step/ncs21914dr2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncs21914dr2g.step/ncs21914dr2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (22 pp, sha256
f5d8387cd1d9293b, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).