NCS214RMUTAG

{
  "slug": "ncs214rmutag",
  "version": "0.1.0",
  "type": "component",
  "description": "onsemi Current Sense Amplifiers, UQFN-10(1.4x1.8). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers-comparators",
    "ncs214rmutag",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ncs214rmutag.kicad_sym",
    "ncs214rmutag.kicad_mod",
    "ncs214rmutag.glb",
    "ncs214rmutag.step",
    "ncs214rmutag.lbr",
    "docs/hero.png",
    "docs/ncs214rmutag-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ncs214rmutag-hero.glb",
    "ncs214rmutag-hero.overlay.json",
    "ncs214rmutag-etched.glb"
  ],
  "component": {
    "mpn": "NCS214RMUTAG",
    "manufacturer": "onsemi",
    "package": "UQFN-10(1.4x1.8)",
    "pin_count": 10,
    "category": "Amplifiers/Comparators",
    "subcategory": "Current Sense Amplifiers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589990617724973056",
    "parts": {
      "symbol": "ncs214rmutag.kicad_sym",
      "footprint": "ncs214rmutag.kicad_mod",
      "model_3d": "ncs214rmutag-hero.glb",
      "model_3d_plain": "ncs214rmutag-etched.glb",
      "model_3d_step": "ncs214rmutag-etched.step",
      "model_3d_step_plain": "ncs214rmutag.step",
      "lbr": "ncs214rmutag.lbr"
    },
    "distributor_links": {
      "lcsc": "C892876",
      "digikey": "NCS214RMUTAGOSTR-ND",
      "mouser": "863-NCS214RMUTAG"
    },
    "distributor_check": {
      "checked_at": "2026-10-21T01:48:45Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "NCS214RMUTAGOSTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "863-NCS214RMUTAG",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; can be left floating or connected to any voltage between VS and GND."
      },
      {
        "number": "2",
        "name": "IN+",
        "type": "input",
        "description": "Non-inverting shunt sense input, common-mode range -0.3 V to 26 V, tied to the same shunt side as pin 3."
      },
      {
        "number": "3",
        "name": "IN+",
        "type": "input",
        "description": "Non-inverting shunt sense input, common-mode range -0.3 V to 26 V, tied to the same shunt side as pin 2."
      },
      {
        "number": "4",
        "name": "IN-",
        "type": "input",
        "description": "Inverting shunt sense input, common-mode range -0.3 V to 26 V, tied to the same shunt side as pin 5."
      },
      {
        "number": "5",
        "name": "IN-",
        "type": "input",
        "description": "Inverting shunt sense input, common-mode range -0.3 V to 26 V, tied to the same shunt side as pin 4."
      },
      {
        "number": "6",
        "name": "Vs",
        "type": "power_in",
        "description": "Supply voltage input, +2.2 V to +26 V operating range (30 V absolute maximum), with 0.1 uF bypass recommended."
      },
      {
        "number": "7",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; can be left floating or connected to any voltage between VS and GND."
      },
      {
        "number": "8",
        "name": "REF",
        "type": "input",
        "description": "Reference voltage input setting the output offset; must be driven from a low-impedance source and not exceed VS + 0.3 V."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "10",
        "name": "OUT",
        "type": "output",
        "description": "Voltage output (gain 100 V/V for NCS214R) swinging to within 200 mV of VS, tolerating up to 1 nF load capacitance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text+vision",
        "consensus_model": "claude-opus-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin numbering was inferred from the top-view drawing on page 1, assuming the usual counter-clockwise",
          "vision extraction: provenance cannot be text-verified; needs consensus"
        ],
        "pages_sent": 18,
        "cost_usd": 0.672,
        "at": "2026-10-21T01:45:18"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589990617724973056",
        "pages": 18,
        "sha256": "b174cc9ca810b5aa",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ncs214rmutag.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          1.4,
          1.8,
          0.57
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "18e8e52c79f660f6db601c893a3ba62a564efea84c0c6dd95908b6b785ca7f2d",
        "checked": "2026-10-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ncs214rmutag-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          1.4,
          1.8,
          0.57
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5545558a8955029c83567c61c67dc8e201fc43ec75f18b62391bb773486850b0",
        "checked": "2026-10-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}