3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNCP716BSN300T1G
onsemi · Linear Voltage Regulators (LDO) · TSOP-5
NCP716BSN300T1G from onsemi, in a TSOP-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated output voltage pin; a small 1.0 µF ceramic capacitor is needed from this pin to ground to assure stability. |
| 2 | GND | power_in | Power supply ground pin. |
| 3 | IN | power_in | Input pin; a small capacitor is needed from this pin to ground to assure stability, and the operating input voltage range is 2.5 V to 24 V. |
| 4 | N/C | unconnected | No connection; this pin can be tied to ground to improve thermal dissipation or left disconnected. |
| 5 | N/C | unconnected | No connection; this pin can be tied to ground to improve thermal dissipation or left disconnected. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TSOP-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Input Voltage | VIN | 2.5 | 24 | V | 3 | ||
| Output Voltage Accuracy | VOUT | 2.94 | 3 | 3.06 | V | −40°C ≤ TJ ≤ 125°C | 3 |
| Line Regulation | RegLINE | 4 | 10 | mV | VOUT + 1 V ≤ VIN ≤ 24 V, IOUT = 0.1 mA | 3 | |
| Load Regulation | RegLOAD | 0.0013 | 0.007 | %/mA | IOUT = 0.1 mA to 150 mA | 3 | |
| Dropout Voltage | VDO | 700 | 1100 | mV | VOUT = 0.97 VOUT(NOM), IOUT = 150 mA | 3 | |
| Maximum Output Current | IOUT | 150 | mA | 3 | |||
| Ground Current | IGND | 3.2 | 4.7 | A | IOUT = 0 mA, −40 < TA < 125°C | 3 | |
| Input Voltage (absolute maximum) | VIN | -0.3 | 24 | V | 2 | ||
| Output Voltage (absolute maximum) | VOUT | -0.3 | 6 | V | 2 | ||
| Maximum Junction Temperature | TJ(MAX) | 150 | °C | 2 | |||
| Storage Temperature | TSTG | -55 | 150 | °C | 2 | ||
| ESD Capability, Human Body Model | ESDHBM | 2000 | V | Tested per EIA/JESD22−A114 | 2 | ||
| ESD Capability, Machine Model | ESDMM | 200 | V | Tested per EIA/JESD22−A115 | 2 | ||
| Operating Junction Temperature | TJ | -40 | 125 | °C | Performance guaranteed over the indicated operating temperature range (Table 4 header); junction temperature should be limited to +125°C maximum | 3 | |
| Power Supply Rejection Ratio | PSRR | 55 | dB | VIN = 4.0 V, VOUT = 3.0 V + 200 mVpp modulation, IOUT = 1 mA, COUT =10 F, f = 100 kHz | 3 | ||
| Output Noise Voltage | VN | 80 | Vrms | VOUT = 3.0 V, IOUT = 150 mA, f = 100 Hz to 100 kHz | 3 | ||
| Thermal Shutdown Temperature | TSD | 180 | °C | Temperature increasing from TJ = +25°C | 3 | ||
| Thermal Shutdown Hysteresis | TSDH | 10 | °C | Temperature falling from TSD | 3 | ||
| Thermal Resistance, Junction-to-Air (TSOP-5) | RJA | 250 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
NCP716BSN300T1G - Footprint:
Package_SO:TSOP-5_1.65x3.05mm_P0.95mm - 3D model: TSOP-5 (KiCad packages3D, STEP)
- 3D model files:
ncp716bsn300t1g-etched.step/ncp716bsn300t1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp716bsn300t1g.step/ncp716bsn300t1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (8 pp, sha256
a0fac2d4062de377, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).