component
NCP715SQ30T2G
Public Made by Adomby adom
onsemi Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SC-70-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
NCP715SQ30T2G
onsemi · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SC-70-5
NCP715SQ30T2G from onsemi, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | N/C | unconnected | No connection; this pin can be tied to ground to improve thermal dissipation or left disconnected. |
| 2 | GND | power_in | Power supply ground. |
| 3 | N/C | unconnected | No connection; this pin can be tied to ground to improve thermal dissipation or left disconnected. |
| 4 | IN | power_in | Input pin (2.5 V to 24 V operating range); a small capacitor is needed from this pin to ground to assure stability. |
| 5 | OUT | power_out | Regulated output voltage pin; a small 0.47 uF ceramic capacitor is needed from this pin to ground to assure stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SC-70-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Input Voltage | VIN | 4 | 24 | V | 0 < IOUT < 50 mA | 8 | |
| Output Voltage Accuracy | VOUT | 2.94 | 3 | 3.06 | V | 4.0 V < VIN < 24 V, 0 < IOUT < 50 mA | 8 |
| Line Regulation | RegLINE | 3 | mV | VOUT + 1 V ≤ VIN ≤ 24 V, IOUT = 1 mA | 8 | ||
| Load Regulation | RegLOAD | 10 | mV | IOUT = 0 mA to 50 mA | 8 | ||
| Dropout Voltage | VDO | 250 | 400 | mV | VDO = VIN, (VOUT(NOM), 90 mV), IOUT = 50 mA | 8 | |
| Maximum Output Current | IOUT | 100 | 200 | mA | 8 | ||
| Ground Current | IGND | 3.2 | 4.2 | µA | 0 < IOUT < 50 mA, -40 < TA < 85°C | 8 | |
| Ground Current | IGND | 5.8 | µA | 0 < IOUT < 50 mA, VIN = 24 V | 8 | ||
| Power Supply Rejection Ratio | PSRR | 60 | dB | VIN = 4.0 V, VOUT = 3.0 V, VPP = 100 mV modulation, IOUT = 1 mA, COUT = 10 µF, f = 100 kHz | 8 | ||
| Output Noise Voltage | VN | 135 | µVrms | VOUT = 3 V, IOUT = 50 mA, f = 200 Hz to 100 kHz, COUT = 10 µF | 8 | ||
| Thermal Shutdown Temperature | TSD | 170 | °C | Temperature increasing from TJ = +25°C | 8 | ||
| Thermal Shutdown Hysteresis | TSDH | 25 | °C | Temperature falling from TSD | 8 | ||
| Input Voltage | VIN | -0.3 | 24 | V | 3 | ||
| Output Voltage | VOUT | -0.3 | 6 | V | 3 | ||
| Maximum Junction Temperature | TJ(MAX) | 150 | °C | 3 | |||
| Operating Ambient Temperature Range | TA | -40 | 125 | °C | 3 | ||
| Storage Temperature Range | TSTG | -55 | 150 | °C | 3 | ||
| ESD Capability, Human Body Model | ESDHBM | 2000 | V | 3 | |||
| ESD Capability, Machine Model | ESDMM | 200 | V | 3 | |||
| Thermal Resistance, Junction-to-Air, SC-70 | RθJA | 390 | °C/W | SC-70 | 3 |
CAD (KiCad official)
- Symbol:
NCP715SQ30T2G - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
ncp715sq30t2g-etched.step/ncp715sq30t2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp715sq30t2g.step/ncp715sq30t2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (22 pp, sha256
6fce190241b29eaf, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NCP715SQ30T2G
**onsemi** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SC-70-5
NCP715SQ30T2G from onsemi, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | N/C | unconnected | No connection; this pin can be tied to ground to improve thermal dissipation or left disconnected. |
| 2 | GND | power_in | Power supply ground. |
| 3 | N/C | unconnected | No connection; this pin can be tied to ground to improve thermal dissipation or left disconnected. |
| 4 | IN | power_in | Input pin (2.5 V to 24 V operating range); a small capacitor is needed from this pin to ground to assure stability. |
| 5 | OUT | power_out | Regulated output voltage pin; a small 0.47 uF ceramic capacitor is needed from this pin to ground to assure stability. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SC-70-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Input Voltage | VIN | 4 | | 24 | V | 0 < IOUT < 50 mA | 8 |
| Output Voltage Accuracy | VOUT | 2.94 | 3 | 3.06 | V | 4.0 V < VIN < 24 V, 0 < IOUT < 50 mA | 8 |
| Line Regulation | RegLINE | | | 3 | mV | VOUT + 1 V ≤ VIN ≤ 24 V, IOUT = 1 mA | 8 |
| Load Regulation | RegLOAD | | | 10 | mV | IOUT = 0 mA to 50 mA | 8 |
| Dropout Voltage | VDO | | 250 | 400 | mV | VDO = VIN, (VOUT(NOM), 90 mV), IOUT = 50 mA | 8 |
| Maximum Output Current | IOUT | 100 | 200 | | mA | | 8 |
| Ground Current | IGND | | 3.2 | 4.2 | µA | 0 < IOUT < 50 mA, -40 < TA < 85°C | 8 |
| Ground Current | IGND | | | 5.8 | µA | 0 < IOUT < 50 mA, VIN = 24 V | 8 |
| Power Supply Rejection Ratio | PSRR | | 60 | | dB | VIN = 4.0 V, VOUT = 3.0 V, VPP = 100 mV modulation, IOUT = 1 mA, COUT = 10 µF, f = 100 kHz | 8 |
| Output Noise Voltage | VN | | 135 | | µVrms | VOUT = 3 V, IOUT = 50 mA, f = 200 Hz to 100 kHz, COUT = 10 µF | 8 |
| Thermal Shutdown Temperature | TSD | | 170 | | °C | Temperature increasing from TJ = +25°C | 8 |
| Thermal Shutdown Hysteresis | TSDH | | 25 | | °C | Temperature falling from TSD | 8 |
| Input Voltage | VIN | -0.3 | | 24 | V | | 3 |
| Output Voltage | VOUT | -0.3 | | 6 | V | | 3 |
| Maximum Junction Temperature | TJ(MAX) | | | 150 | °C | | 3 |
| Operating Ambient Temperature Range | TA | -40 | | 125 | °C | | 3 |
| Storage Temperature Range | TSTG | -55 | | 150 | °C | | 3 |
| ESD Capability, Human Body Model | ESDHBM | | | 2000 | V | | 3 |
| ESD Capability, Machine Model | ESDMM | | | 200 | V | | 3 |
| Thermal Resistance, Junction-to-Air, SC-70 | RθJA | | 390 | | °C/W | SC-70 | 3 |
## CAD (KiCad official)
- Symbol: `NCP715SQ30T2G`
- Footprint: `Package_TO_SOT_SMD:SOT-353_SC-70-5`
- 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files: `ncp715sq30t2g-etched.step` / `ncp715sq30t2g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ncp715sq30t2g.step` / `ncp715sq30t2g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/ncp715sq30t2-d.pdf) (22 pp, sha256 `6fce190241b29eaf`, retrieved 2026-10-27, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ncp715sq30t2g-datasheet.pdf)