NCP711ASNADJT1G

{
  "schema_version": 1,
  "type": "component",
  "slug": "ncp711asnadjt1g",
  "title": "NCP711ASNADJT1G",
  "brief": "onsemi Linear Voltage Regulators (LDO), TSOP-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management ics",
    "ncp711asnadjt1g",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "NCP711ASNADJT1G",
    "manufacturer": "onsemi",
    "package": "TSOP-5",
    "pin_count": 5,
    "category": "Power Management ICs",
    "subcategory": "Linear Voltage Regulators (LDO)",
    "datasheet": "https://www.onsemi.com/pdf/datasheet/ncp711asnadjt1-d.pdf",
    "parts": {
      "symbol": "ncp711asnadjt1g.kicad_sym",
      "footprint": "ncp711asnadjt1g.kicad_mod",
      "model_3d": "ncp711asnadjt1g-hero.glb",
      "model_3d_plain": "ncp711asnadjt1g-etched.glb",
      "model_3d_step": "ncp711asnadjt1g-etched.step",
      "model_3d_step_plain": "ncp711asnadjt1g.step",
      "lbr": "ncp711asnadjt1g.lbr"
    },
    "distributor_links": {
      "lcsc": "C892727",
      "digikey": "488-NCP711ASNADJT1GTR-ND",
      "mouser": "863-NCP711ASNADJT1G"
    },
    "distributor_check": {
      "checked_at": "2026-10-23T03:17:45Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "488-NCP711ASNADJT1GTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "863-NCP711ASNADJT1G",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "IN",
        "type": "power_in",
        "description": "Power supply input pin, recommended input voltage range 2.7 V to 18 V."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "Enable input pin (high - enabled, low - disabled); if connected to IN or left unconnected (no pull-up resistor required) the device is enabled."
      },
      {
        "number": "4",
        "name": "ADJ",
        "type": "input",
        "description": "Adjust input pin on the ADJ version (NCP711ASNADJT1G); connect it to the output resistor divider or directly to the OUT pin, with a 1.2 V reference."
      },
      {
        "number": "5",
        "name": "OUT",
        "type": "power_out",
        "description": "LDO output pin, up to 100 mA output current."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: TSOP-5 pin 4 function depends on device version (NC/ADJ/PG). NCP711ASNADJT1G is the adjustable versi"
        ],
        "pages_sent": 12,
        "cost_usd": 0.106,
        "at": "2026-10-23T03:17:35"
      },
      "datasheet": {
        "url": "https://www.onsemi.com/pdf/datasheet/ncp711asnadjt1-d.pdf",
        "pages": 12,
        "sha256": "e38ab168e681b63f",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 5,
        "described": 5,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ncp711asnadjt1g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          3.05,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "7bb4f709cbcec3383aaa7ba920208a4d73b376d9bb60806b65f21dbdb00a84b7",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ncp711asnadjt1g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          3.05,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "c9842864f9f86dec8cf73b8cf1a89c435eb64f3b31ad555f3a91046d0eb95a40",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "onsemi",
      "Package": "TSOP-5",
      "Category": "Power Management ICs",
      "Pins": "5"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "e38ab168e681b63f489df9775c4918c5af4305a78de187996fb391bca14c71fe",
      "rows": [
        {
          "name": "Recommended Input Voltage",
          "symbol": "VIN",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 2.7,
          "typ": null,
          "max": 18,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Output Voltage Accuracy",
          "symbol": "VOUT",
          "kind": "electrical",
          "unit": "%",
          "min": -1,
          "typ": null,
          "max": 1,
          "conditions": "TJ = −40°C to +85°C",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Output Voltage Accuracy",
          "symbol": "VOUT",
          "kind": "electrical",
          "unit": "%",
          "min": -1,
          "typ": null,
          "max": 2,
          "conditions": "TJ = −40°C to +125°C",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "ADJ Reference Voltage",
          "symbol": "VADJ",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": 1.2,
          "max": null,
          "conditions": "ADJ version only",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "ADJ Input Current",
          "symbol": "IADJ",
          "kind": "electrical",
          "unit": "A",
          "min": -0.1,
          "typ": 0.01,
          "max": 0.1,
          "conditions": "VADJ = 1.2 V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Line Regulation",
          "symbol": "VO(VI)",
          "kind": "electrical",
          "unit": "%VOUT",
          "min": null,
          "typ": null,
          "max": 0.2,
          "conditions": "VIN = VOUT−NOM + 1 V to 18 V and VIN ≥ 2.7 V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Load Regulation",
          "symbol": "VO(IO)",
          "kind": "electrical",
          "unit": "%VOUT",
          "min": null,
          "typ": null,
          "max": 0.4,
          "conditions": "IOUT = 0.1 mA to 100 mA",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Quiescent Current (version A)",
          "symbol": "IQ",
          "kind": "electrical",
          "unit": "A",
          "min": null,
          "typ": 1.3,
          "max": 2.5,
          "conditions": "VIN = VOUT−NOM + 1 V to 18 V, IOUT = 0 mA",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Ground Current",
          "symbol": "IGND",
          "kind": "electrical",
          "unit": "A",
          "min": null,
          "typ": 325,
          "max": 450,
          "conditions": "IOUT = 100 mA",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Shutdown Current",
          "symbol": "ISHDN",
          "kind": "electrical",
          "unit": "A",
          "min": null,
          "typ": 0.35,
          "max": 1.5,
          "conditions": "VEN = 0 V, IOUT = 0 mA, VIN = 18 V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Output Current Limit",
          "symbol": "IOLIM",
          "kind": "electrical",
          "unit": "mA",
          "min": 140,
          "typ": 250,
          "max": 450,
          "conditions": "VOUT = VOUT−NOM − 100 mV",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Short Circuit Current",
          "symbol": "IOSC",
          "kind": "electrical",
          "unit": "mA",
          "min": 140,
          "typ": 250,
          "max": 450,
          "conditions": "VOUT = 0 V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Dropout Voltage",
          "symbol": "VDO",
          "kind": "electrical",
          "unit": "mV",
          "min": null,
          "typ": 215,
          "max": 355,
          "conditions": "IOUT = 100 mA",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "EN Threshold",
          "symbol": "VEN−TH",
          "kind": "electrical",
          "unit": "V",
          "min": 0.7,
          "typ": 0.9,
          "max": 1.05,
          "conditions": "VEN rising",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "EN Hysteresis",
          "symbol": "VEN−HY",
          "kind": "electrical",
          "unit": "V",
          "min": 0.01,
          "typ": 0.1,
          "max": 0.2,
          "conditions": "VEN falling",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "EN Internal Pull−up Current",
          "symbol": "IEN−PU",
          "kind": "electrical",
          "unit": "A",
          "min": 0.01,
          "typ": 0.3,
          "max": 1,
          "conditions": "VEN = 1 V, VIN = 5.5 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "EN Input Leakage Current",
          "symbol": "IEN−LK",
          "kind": "electrical",
          "unit": "A",
          "min": -1,
          "typ": 0.05,
          "max": 1,
          "conditions": "VEN = 18 V, VIN = 18 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Internal UVLO Threshold",
          "symbol": "VIUL−TH",
          "kind": "electrical",
          "unit": "V",
          "min": 1.6,
          "typ": 1.95,
          "max": 2.6,
          "conditions": "Ramp VIN up until output is turned on",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Internal UVLO Hysteresis",
          "symbol": "VIUL−HY",
          "kind": "electrical",
          "unit": "V",
          "min": 0.05,
          "typ": 0.2,
          "max": 0.3,
          "conditions": "Ramp VIN down until output is turned off",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Start−up time",
          "symbol": "tSTART",
          "kind": "timing",
          "unit": "s",
          "min": 100,
          "typ": 250,
          "max": 500,
          "conditions": "VOUT−NOM ≤ 3.3 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Start−up time",
          "symbol": "tSTART",
          "kind": "timing",
          "unit": "s",
          "min": 300,
          "typ": 600,
          "max": 1000,
          "conditions": "VOUT−NOM > 3.3 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "VIN Voltage",
          "symbol": "VIN",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 22,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "VOUT Voltage",
          "symbol": "VOUT",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 22,
          "conditions": "max is (VIN + 0.3) or 22 V; whichever is lower",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "EN Voltage",
          "symbol": "VEN",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": null,
          "conditions": "max is VIN + 0.3",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "ADJ Voltage",
          "symbol": "VFB/ADJ",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 5.5,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Maximum Junction Temperature",
          "symbol": "TJ(MAX)",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Storage Temperature",
          "symbol": "TSTG",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -55,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "ESD Capability, Human Body Model",
          "symbol": "ESDHBM",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 2000,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "ESD Capability, Charged Device Model",
          "symbol": "ESDCDM",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 1000,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Thermal Resistance, Junction−to−Air",
          "symbol": "RthJA",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 147,
          "max": null,
          "conditions": "TSOP−5, JEDEC 1S2P board",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Thermal Resistance, Junction−to−Case (top)",
          "symbol": "RthJCt",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 82,
          "max": null,
          "conditions": "TSOP−5",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Thermal Resistance, Junction−to−Board (top)",
          "symbol": "RthJBt",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 113,
          "max": null,
          "conditions": "TSOP−5",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Thermal Characterization Parameter, Junction−to−Case (top)",
          "symbol": "PsiJCt",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 22,
          "max": null,
          "conditions": "TSOP−5",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Thermal Characterization Parameter, Junction−to−Board",
          "symbol": "PsiJB",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 113,
          "max": null,
          "conditions": "TSOP−5",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Power Supply Ripple Rejection",
          "symbol": "PSRR",
          "kind": "electrical",
          "unit": "dB",
          "min": null,
          "typ": 80,
          "max": null,
          "conditions": "VIN = VOUT−NOM + 2 V, IOUT = 10 mA, 10 Hz",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Power Supply Ripple Rejection",
          "symbol": "PSRR",
          "kind": "electrical",
          "unit": "dB",
          "min": null,
          "typ": 70,
          "max": null,
          "conditions": "VIN = VOUT−NOM + 2 V, IOUT = 10 mA, 10 kHz",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Output Noise",
          "symbol": "VN",
          "kind": "electrical",
          "unit": "VRMS",
          "min": null,
          "typ": 240,
          "max": null,
          "conditions": "f = 10 Hz to 100 kHz, VOUT−NOM = 5.0 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Thermal Shutdown Temperature",
          "symbol": "TSD",
          "kind": "thermal",
          "unit": "°C",
          "min": null,
          "typ": 165,
          "max": null,
          "conditions": "Temperature rising from TJ = +25°C",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Thermal Shutdown Hysteresis",
          "symbol": "TSDH",
          "kind": "thermal",
          "unit": "°C",
          "min": null,
          "typ": 20,
          "max": null,
          "conditions": "Temperature falling from TSD",
          "source_page": 5,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ncp711asnadjt1g"
  ],
  "discovery_pitch": "NCP711ASNADJT1G (onsemi) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ncp711asnadjt1g.kicad_sym",
    "ncp711asnadjt1g.kicad_mod",
    "ncp711asnadjt1g.glb",
    "ncp711asnadjt1g.step",
    "ncp711asnadjt1g.lbr",
    "docs/hero.png",
    "docs/ncp711asnadjt1g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ncp711asnadjt1g-hero.glb",
    "ncp711asnadjt1g-hero.overlay.json",
    "ncp711asnadjt1g-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}