Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
NCP699SN18T1G
onsemi · Linear Voltage Regulators (LDO) · TSOP-5
NCP699SN18T1G from onsemi, in a TSOP-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vin | power_in | Positive power supply input voltage, rated 2.1 to 6.0 V in the maximum ratings. |
| 2 | Gnd | power_in | Power supply ground. |
| 3 | Enable | input | Pulling this input low places the device into low-power standby; the enable threshold is 0.95 V rising and 0.3 V falling, and if unused it should be connected to Vin. |
| 4 | N/C | unconnected | No internal connection. |
| 5 | Vout | power_out | Regulated output voltage, rated −0.3 V to Vin + 0.3 V in the maximum ratings. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TSOP-5 |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | Vout | 1.746 | 1.8 | 1.854 | V | Iout = 10 mA, TA = −40°C to 85°C | 3 |
| Output Current Limit | Io(nom.) | 150 | 240 | mA | 1.3 V−3.9 V (Vin = Vout(nom.) + 2.0 V) | 3 | |
| Dropout Voltage | Vin−Vout | 570 | 620 | mV | Iout = 150 mA, Measured at Vout = Vout(nom) −3.0% | 3 | |
| Disable Current | DIS | 0.03 | 1 | A | TA = −40°C to 85°C, Enable Input = 0 V | 3 | |
| Ground Current | IGND | 40 | 90 | A | TA = −40°C to 85°C, Enable Input = Vin, Iout = 1.0 mA to Io(nom.) | 3 | |
| Output Short Circuit Current | Iout(max) | 150 | 300 | 600 | mA | 1.3 V−3.9 V (Vin = Vout(nom.) + 2.0 V) | 3 |
| Line Regulation | Regline | 1 | 3 | mV/V | Iout = 10 mA, 1.3 V−4.4 V (Vin = Vout(nom.) + 1.0 V to 6.0 V) | 3 | |
| Load Regulation | Regload | 0.3 | 0.8 | mV/mA | Iout = 1.0 mA to 150 mA | 3 | |
| Enable Input Threshold Voltage (Voltage Increasing, Output Turns On, Logic High) | Vth(en) | 0.95 | V | TA = −40°C to 85°C | 3 | ||
| Enable Input Threshold Voltage (Voltage Decreasing, Output Turns Off, Logic Low) | Vth(en) | 0.3 | V | TA = −40°C to 85°C | 3 | ||
| Ripple Rejection | RR | 55 | dB | f = 120 Hz, 15 mA | 3 | ||
| Ripple Rejection | RR | 50 | dB | f = 1.0 kHz, 15 mA | 3 | ||
| Output Voltage Noise | Vn | 100 | Vrms | f = 100 Hz to 100 kHz, Iout = 30 mA, Cout = 1 F | 3 | ||
| Output Voltage Temperature Coefficient | TC | 100 | ppm/°C | 3 | |||
| Input Voltage | Vin | 2.1 | 6 | V | Maximum Ratings | 2 | |
| Enable Voltage | Enable | -0.3 | V | Maximum voltage Vin +0.3 V | 2 | ||
| Output Voltage | Vout | -0.3 | V | Maximum voltage Vin +0.3 V | 2 | ||
| Operating Junction Temperature | TJ | 150 | °C | 2 | |||
| Maximum Junction Temperature | TJ(max) | 150 | °C | 2 | |||
| Operating Ambient Temperature | TA | -40 | 85 | °C | 2 | ||
| Storage Temperature | Tstg | -55 | 150 | °C | 2 | ||
| Junction-to-Ambient Thermal Resistance | RJA | 250 | °C/W | 1 oz Copper Thickness, 100 mm2 | 2 | ||
| PSIJ-Lead | JL2 | 68 | °C/W | 1 oz Copper Thickness, 100 mm2 | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Copper | PSIJ−Lead 2 JL2 1 oz Copper Thickness, 100 mm2 68 °C/W | 2 |
CAD (KiCad official)
- Symbol:
NCP699SN18T1G - Footprint:
Package_SO:TSOP-5_1.65x3.05mm_P0.95mm - 3D model: TSOP-5 (KiCad packages3D, STEP)
- 3D model files:
ncp699sn18t1g-etched.step/ncp699sn18t1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp699sn18t1g.step/ncp699sn18t1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (8 pp, sha256
baf50af65c8b9f98, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).