main
History Download
Ray Publish 0.1.0 f5fa871

NCP612SQ18T2G

onsemi · Linear Voltage Regulators (LDO) · SC-70-5

NCP612SQ18T2G from onsemi, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Vin power_in Positive power supply input voltage, rated 0 to 6.0 V in the maximum ratings table.
2 Gnd power_in Power supply ground.
3 Enable input Pulling this input low places the device into low-power standby and disables it; if unused it should be connected to Vin.
4 N/C unconnected No internal connection.
5 Vout power_out Regulated output voltage, rated −0.3 V to Vin +0.3 V in the maximum ratings table.

Key specifications

Parameter Value
Manufacturer onsemi
Package SC-70-5
Category Power Management ICs
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage (TA = 25°C, Iout = 10 mA) Vout 1.746 1.8 1.854 V TA = 25°C, Iout = 10 mA; 1.8 V version 2
Output Voltage (TA = −40°C to 85°C, Iout = 10 mA) Vout 1.746 1.8 1.854 V TA = −40°C to 85°C, Iout = 10 mA; 1.8 V version 2
Dropout Voltage Vin−Vout 420 560 mV TA = −40°C to 85°C, Iout = 100 mA, Measured at Vout(nom) −3.0%; 1.8 V version 3
Output Current Io(nom.) 100 200 mA 1.5 V−3.9 V (Vin = Vout(nom.) + 2.0 V) 3
Output Short Circuit Current Iout(max) 150 300 600 mA 1.5 V−3.9 V (Vin = Vout(nom.) + 2.0 V); Vout = 0 V 3
Line Regulation Regline 1 3 mV/V Iout = 10 mA, 1.5 V−4.4 V (Vin = Vout(nom.) + 1.0 V to 6.0 V) 3
Load Regulation Regload 0.3 0.8 mV/mA Iout = 1.0 mA to 100 mA 3
Ground Current IGND 40 90 µA Enable Input = Vin, Iout = 1.0 mA to Io(nom.) 3
Quiescent Current (TA = −40°C to 85°C) IQ 0.03 1 µA Enable Input = 0 V 3
Quiescent Current (TA = −40°C to 85°C) IQ 40 90 µA Enable Input = Vin, Iout = 1.0 mA to Io(nom.) 3
Output Voltage Noise Vn 100 Vrms Iout = 30 mA, Cout = 1 µF, f = 100 Hz to 100 kHz 3
Enable Input Threshold Voltage (Logic High) Vth(en) 0.95 V Voltage Increasing, Output Turns On, Logic High 3
Enable Input Threshold Voltage (Logic Low) Vth(en) 0.3 V Voltage Decreasing, Output Turns Off, Logic Low 3
Output Voltage Temperature Coefficient TC 100 ppm/°C 3
Input Voltage Vin 0 6 V 2
Enable Voltage Enable -0.3 V Max = Vin + 0.3 V 2
Output Voltage Vout -0.3 V Max = Vin + 0.3 V 2
Operating Junction Temperature TJ 150 °C 2
Operating Ambient Temperature TA -40 125 °C 2
Storage Temperature Tstg -55 150 °C 2
Thermal Resistance, Junction-to-Ambient RJA 300 °C/W 2

CAD (KiCad official)

  • Symbol: NCP612SQ18T2G
  • Footprint: Package_TO_SOT_SMD:SOT-353_SC-70-5
  • 3D model: SC-70-5 (KiCad packages3D, STEP)
  • 3D model files: ncp612sq18t2g-etched.step / ncp612sq18t2g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp612sq18t2g.step / ncp612sq18t2g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (10 pp, sha256 955b3316f14c2080, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF