← Commit history
page.json+194−8@@ -1,13 +1,204 @@ {+ "schema_version": 1,+ "type": "component", "slug": "ncp59744mn2adjtbg",+ "title": "NCP59744MN2ADJTBG",+ "brief": "onsemi Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, QFN-20(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "onsemi Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, QFN-20(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "pmic", "ncp59744mn2adjtbg" ],+ "component": {+ "mpn": "NCP59744MN2ADJTBG",+ "manufacturer": "onsemi",+ "package": "QFN-20(5x5)",+ "pin_count": 21,+ "category": "PMIC",+ "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/1912271732_onsemi-NCP59744MN2ADJTBG_C462919.pdf",+ "parts": {+ "symbol": "ncp59744mn2adjtbg.kicad_sym",+ "footprint": "ncp59744mn2adjtbg.kicad_mod",+ "model_3d": "ncp59744mn2adjtbg.glb",+ "model_3d_step": "ncp59744mn2adjtbg.step",+ "lbr": "ncp59744mn2adjtbg.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "OUT",+ "type": "power_out",+ "description": "Regulated output voltage (0.8 V to 3.6 V). One of four paralleled OUT pins (1, 18, 19, 20). Recommended COUT >= 2.2 uF ceramic."+ },+ {+ "number": "2",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection. May be left floating or tied to GND for improved thermal contact to the top-side plane."+ },+ {+ "number": "3",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection. May be left floating or tied to GND for improved thermal contact to the top-side plane."+ },+ {+ "number": "4",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection. May be left floating or tied to GND for improved thermal contact to the top-side plane."+ },+ {+ "number": "5",+ "name": "IN",+ "type": "power_in",+ "description": "Unregulated input to the pass device (VIN 0.8 V to 5.5 V). One of four paralleled IN pins (5, 6, 7, 8)."+ },+ {+ "number": "6",+ "name": "IN",+ "type": "power_in",+ "description": "Unregulated input to the pass device (VIN 0.8 V to 5.5 V). One of four paralleled IN pins (5, 6, 7, 8)."+ },+ {+ "number": "7",+ "name": "IN",+ "type": "power_in",+ "description": "Unregulated input to the pass device (VIN 0.8 V to 5.5 V). One of four paralleled IN pins (5, 6, 7, 8)."+ },+ {+ "number": "8",+ "name": "IN",+ "type": "power_in",+ "description": "Unregulated input to the pass device (VIN 0.8 V to 5.5 V). One of four paralleled IN pins (5, 6, 7, 8)."+ },+ {+ "number": "9",+ "name": "PG",+ "type": "output",+ "description": "Power-Good open-drain, active-high output. Goes high-Z when VOUT exceeds the PG trip threshold (~90% of nominal) and is pulled low otherwise. Requires an external 10 kOhm to 1 MOhm pull-up to a supply up to 5.5 V. May be left floating if unused."+ },+ {+ "number": "10",+ "name": "BIAS",+ "type": "power_in",+ "description": "Bias input voltage (2.2 V to 5.5 V) for the error amplifier, reference, and internal control circuits. Typical IBIAS ~1.3 mA."+ },+ {+ "number": "11",+ "name": "EN",+ "type": "input",+ "description": "Enable pin. Driving high (>=1.1 V) enables the regulator; driving low (<=0.4 V) puts it into shutdown. Must not be left floating. 100 mV hysteresis and ~20 us deglitch."+ },+ {+ "number": "12",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the regulator."+ },+ {+ "number": "13",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection. May be left floating or tied to GND for improved thermal contact to the top-side plane."+ },+ {+ "number": "14",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection. May be left floating or tied to GND for improved thermal contact to the top-side plane."+ },+ {+ "number": "15",+ "name": "SS",+ "type": "passive",+ "description": "Soft-Start pin. A capacitor from this pin to GND sets the startup time using ISS ~0.45 uA charging. If left floating, soft-start ramp is typically 200 us. Must not be left floating for user-programmed soft-start."+ },+ {+ "number": "16",+ "name": "FB",+ "type": "input",+ "description": "Feedback input to the error amplifier. Connect to the center tap of an external resistor divider that sets the output voltage (VREF = 0.8 V). Must not be left floating."+ },+ {+ "number": "17",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection. May be left floating or tied to GND for improved thermal contact to the top-side plane."+ },+ {+ "number": "18",+ "name": "OUT",+ "type": "power_out",+ "description": "Regulated output voltage. One of four paralleled OUT pins (1, 18, 19, 20)."+ },+ {+ "number": "19",+ "name": "OUT",+ "type": "power_out",+ "description": "Regulated output voltage. One of four paralleled OUT pins (1, 18, 19, 20)."+ },+ {+ "number": "20",+ "name": "OUT",+ "type": "power_out",+ "description": "Regulated output voltage. One of four paralleled OUT pins (1, 18, 19, 20)."+ },+ {+ "number": "PAD",+ "name": "GND",+ "type": "power_in",+ "description": "Exposed thermal pad on the underside of the package. Must be soldered to the PCB ground plane for proper thermal performance and electrical grounding."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/1912271732_onsemi-NCP59744MN2ADJTBG_C462919.pdf",+ "pages": 12,+ "sha256": "85f37db2e0c8407b",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 21,+ "described": 21,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "onsemi",+ "Package": "QFN-20(5x5)",+ "Category": "PMIC",+ "Pins": "21"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "ncp59744mn2adjtbg"+ ],+ "discovery_pitch": "NCP59744MN2ADJTBG (onsemi) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +216,5 @@ "docs/ncp59744mn2adjtbg-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }