main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ncp508sq33t1g: viewers · Ray
ncp508sq33t1g-etched.glb Publish 0.1.0 · Ray
ncp508sq33t1g-etched.step ncp508sq33t1g: factory component page (tier=mfr) · Ray
ncp508sq33t1g-hero.glb ncp508sq33t1g: hero GLB from the etched model (keeps the MPN mark) · Ray
ncp508sq33t1g-hero.overlay.json Publish 0.1.0 · Ray
ncp508sq33t1g.glb Publish 0.1.0 · Ray
ncp508sq33t1g.kicad_mod Publish 0.1.0 · Ray
ncp508sq33t1g.kicad_sym Publish 0.1.0 · Ray
ncp508sq33t1g.lbr Publish 0.1.0 · Ray
ncp508sq33t1g.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray

NCP508SQ33T1G

onsemi · Linear Voltage Regulators (LDO) · SOT-353

NCP508SQ33T1G from onsemi, in a SOT-353. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Vin power_in Positive power supply input voltage; the datasheet gives a maximum input voltage Vin(max) of 13.0 V and a maximum recommended operating input of 7.0 V.
2 GND power_in Power supply ground.
3 Enable input When pulled low the device is disabled and placed into low-power standby; if the enable function is not used it should be connected to Vin.
4 N/C unconnected Not connected pin.
5 Vout power_out Regulated output voltage, rated for an output current Iout(nom) of at least 50 mA.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOT-353
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Tolerance (TA = 25°C, Iout = 10 mA) Vout -2 2 % TA = 25°C, Iout = 10 mA 3
Output Voltage Tolerance (TA = −40°C to 85°C, Iout = 10 mA) Vout -3 3 % TA = −40°C to 85°C, Iout = 10 mA 3
Line Regulation Regline 2 20 mV Vin = Vout + 1 V to 12 V, Iout = 10 mA 3
Load Regulation Regload 6 40 mV Iout = 1.0 mA to 50 mA 3
Output Current Iout(nom) 50 mA Vout = Vout(nom), 0.1 V 3
Dropout Voltage Vin−Vout 140 250 mV Vout = 3.0 V, measured at Vout − 100 mV, Iout = 30 mA 3
Dropout Voltage Vin−Vout 155 300 mV Vout = 3.0 V, measured at Vout − 100 mV, Iout = 40 mA 3
Dropout Voltage Vin−Vout 180 mV Vout = 3.0 V, measured at Vout − 100 mV, Iout = 50 mA 3
Quiescent Current IQ 0.1 1 A Enable Input = 0V 3
Ground Current IGND 145 200 A Enable Input = Vin, Vin = Vout + 1 V, Iout = 0 mA 3
Ground Current IGND 160 260 A Enable Input = Vin, Iout = 1 mA 3
Ground Current IGND 300 500 A Enable Input = Vin, Iout = 10 mA 3
Ground Current IGND 1100 1900 A Enable Input = Vin, Iout = 50 mA 3
Enable Input Threshold Voltage (Voltage Increasing, Output Turns On, Logic High) Vth(en) 0.9 V Voltage Increasing, Output Turns On, Logic High 3
Enable Input Threshold Voltage (Voltage Decreasing, Output Turns Off, Logic Low) Vth(en) 0.15 V Voltage Decreasing, Output Turns Off, Logic Low 3
Enable Input Current Ienable 8 15 A Venable = 2.4 V 3
Output Turn On Time 20 s Enable at 10% to Vout at 95% nominal value 3
Output Short Circuit Current Limit Iout(max) 100 250 mA Vout = 0 V 3
Ripple Rejection RR 70 dB Vin = Vout(nom) + 1 Vdc + 0.5 Vpp, f = 1 kHz, Io = 10 mA 3
Maximum Operating Input Voltage Vin 7 V 2
Operating Ambient Temperature TA -40 85 °C 2
Input Voltage Vin(max) 13 V 2
Enable Voltage Enable -0.3 V Printed max is Vin(max) + 0.3 V 2
Output Voltage Vout -0.3 V Printed max is Vin(max) + 0.3 V 2
Maximum Junction Temperature TJ 125 °C 2
Storage Temperature Tstg -55 150 °C 2
Lead Soldering Temperature Tsolder 260 °C 10 sec 2
Thermal Resistance, Junction-to-Ambient (SC-88A) RJA 200 °C/W RJA on a 30 x 30 mm PCB Cu thickness 1 oz; TA = 25°C 2

CAD (KiCad official)

  • Symbol: NCP508SQ33T1G
  • Footprint: Package_TO_SOT_SMD:SOT-353_SC-70-5
  • 3D model: SOT-353 (KiCad packages3D, STEP)
  • 3D model files: ncp508sq33t1g-etched.step / ncp508sq33t1g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp508sq33t1g.step / ncp508sq33t1g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (16 pp, sha256 1fae753c1c39c5fe, retrieved 2026-10-27, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed (audit)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF