main
Ray
ncp4318alcdr2g: laser-etched CAD + chip hero (factory 2.0.0 backfill)
a994b8c
NCP4318ALCDR2G
onsemi · AC-DC Controllers and Regulators · SOIC-8
NCP4318ALCDR2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GATE1 | output | Gate drive output for SR MOSFET1. Adaptive clamp at 10 V (heavy load) or 6 V (light load). Peak sourcing 1.5 A / sinking 4.5 A, 30 ns typical turn-on/turn-off propagation delay. Max rated 17 V. |
| 2 | GND | power_in | Device ground. All voltages are referenced to this pin. |
| 3 | VS1 | input | Synchronous rectifier source sense input for SR1. Recommended operating range -0.3 V to 5 V (max -0.3 V to 5.5 V DC, -4 V to 5.5 V dynamic 200 ns pulse). |
| 4 | VD1 | input | Synchronous rectifier drain sense input for SR1. IOFFSET1 current source (~310 uA typ, 10 uA/step) flows out of this pin so an external series resistor sets the SR turn-off threshold. IOFFSET1 is disabled during VDD UVLO or green mode. Max rated 200 V. |
| 5 | VS2 | input | Synchronous rectifier source sense input for SR2. Recommended operating range -0.3 V to 5 V (max -0.3 V to 5.5 V DC, -4 V to 5.5 V dynamic 200 ns pulse). |
| 6 | VD2 | input | Synchronous rectifier drain sense input for SR2. IOFFSET2 current source (~310 uA typ, 10 uA/step) flows out of this pin so an external series resistor sets the SR turn-off threshold. IOFFSET2 is disabled during VDD UVLO or green mode. Max rated 200 V. |
| 7 | VDD | power_in | Supply voltage. Recommended 0 V-35 V, absolute max 37 V. Turn-on UVLO ~4.0 V, turn-off ~3.8 V. SR gate enabled above VDD_GATE_ON (~6.5-7.1 V). |
| 8 | GATE2 | output | Gate drive output for SR MOSFET2. Adaptive clamp at 10 V (heavy load) or 6 V (light load). Peak sourcing 1.5 A / sinking 4.5 A, 30 ns typical turn-on/turn-off propagation delay. Max rated 17 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-8 |
| Category | PMIC |
| Pins | 8 |
Ordering variants
NCP4318ALCDR2GNCP4318ALCDR2GBLCDR2GNCP4318ALCDR2GALSDR2GNCP4318ALCDR2GAHJDR2GNCP4318ALCDR2GALKDR2G
CAD (KiCad official)
- Symbol:
NCP4318ALCDR2G - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ncp4318alcdr2g-etched.step/ncp4318alcdr2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp4318alcdr2g.step/ncp4318alcdr2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (None pp, sha256
41429236d5d836f1, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NCP4318ALCDR2G
**onsemi** · AC-DC Controllers and Regulators · SOIC-8
NCP4318ALCDR2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GATE1 | output | Gate drive output for SR MOSFET1. Adaptive clamp at 10 V (heavy load) or 6 V (light load). Peak sourcing 1.5 A / sinking 4.5 A, 30 ns typical turn-on/turn-off propagation delay. Max rated 17 V. |
| 2 | GND | power_in | Device ground. All voltages are referenced to this pin. |
| 3 | VS1 | input | Synchronous rectifier source sense input for SR1. Recommended operating range -0.3 V to 5 V (max -0.3 V to 5.5 V DC, -4 V to 5.5 V dynamic 200 ns pulse). |
| 4 | VD1 | input | Synchronous rectifier drain sense input for SR1. IOFFSET1 current source (~310 uA typ, 10 uA/step) flows out of this pin so an external series resistor sets the SR turn-off threshold. IOFFSET1 is disabled during VDD UVLO or green mode. Max rated 200 V. |
| 5 | VS2 | input | Synchronous rectifier source sense input for SR2. Recommended operating range -0.3 V to 5 V (max -0.3 V to 5.5 V DC, -4 V to 5.5 V dynamic 200 ns pulse). |
| 6 | VD2 | input | Synchronous rectifier drain sense input for SR2. IOFFSET2 current source (~310 uA typ, 10 uA/step) flows out of this pin so an external series resistor sets the SR turn-off threshold. IOFFSET2 is disabled during VDD UVLO or green mode. Max rated 200 V. |
| 7 | VDD | power_in | Supply voltage. Recommended 0 V-35 V, absolute max 37 V. Turn-on UVLO ~4.0 V, turn-off ~3.8 V. SR gate enabled above VDD_GATE_ON (~6.5-7.1 V). |
| 8 | GATE2 | output | Gate drive output for SR MOSFET2. Adaptive clamp at 10 V (heavy load) or 6 V (light load). Peak sourcing 1.5 A / sinking 4.5 A, 30 ns typical turn-on/turn-off propagation delay. Max rated 17 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-8 |
| Category | PMIC |
| Pins | 8 |
## Ordering variants
- `NCP4318ALCDR2G`
- `NCP4318ALCDR2GBLCDR2G`
- `NCP4318ALCDR2GALSDR2G`
- `NCP4318ALCDR2GAHJDR2G`
- `NCP4318ALCDR2GALKDR2G`
## CAD (KiCad official)
- Symbol: `NCP4318ALCDR2G`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `ncp4318alcdr2g-etched.step` / `ncp4318alcdr2g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ncp4318alcdr2g.step` / `ncp4318alcdr2g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](docs/ncp4318alcdr2g-datasheet.pdf) (None pp, sha256 `41429236d5d836f1`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ncp4318alcdr2g-datasheet.pdf)