Generated by kicad-footprint-generator · KiCad file format 20260206
NCP43080DDR2G
onsemi · AC-DC Controllers & Regulators · SOIC-8
NCP43080DDR2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply voltage pin; operating voltage range up to VCC = 35 V. |
| 2 | MIN_TOFF | passive | Adjusts the minimum off time period by connecting a resistor to ground. |
| 3 | MIN_TON | passive | Adjusts the minimum on time period by connecting a resistor to ground. |
| 4 | LLD | input | Input that modulates the driver clamp level and/or turns the driver off during light load conditions. |
| 5 | NC | unconnected | No connect on the NCP43080D; leave this pin open or tie it to ground. |
| 6 | CS | input | Current sense pin that detects current through the SR MOSFET and/or its body diode, with a basic turn-off threshold of 0 mV, rugged up to 150 V; a series resistor can decrease the turn-off threshold. |
| 7 | GND | power_in | Ground for the SR MOSFET driver, VCC decoupling capacitor, min on/off time resistors and LLD input; wire directly to the SR MOSFET source using Kelvin connection. |
| 8 | DRV | output | Driver output for the SR MOSFET with 8 A sink / 4 A source peak current capability and a 9.5 V clamp on the D version. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | -0.3 | 37 | V | 6 | ||
| MIN_TON, MIN_TOFF, MAX_TON, LLD Input Voltage | VMIN_TON, VMIN_TOFF, VMAX_TON, VLLD | -0.3 | V | max is VCC as printed | 6 | ||
| Driver Output Voltage | VDRV | -0.3 | 17 | V | 6 | ||
| Current Sense Input Voltage | VCS | -4 | 150 | V | 6 | ||
| Current Sense Dynamic Input Voltage | VCS_DYN | -10 | 150 | V | tPW = 200 ns | 6 | |
| MIN_TON, MIN_TOFF, MAX_TON, LLD Input Current | IMIN_TON, IMIN_TOFF, IMAX_TON, ILLD | -10 | 10 | mA | 6 | ||
| Junction to Air Thermal Resistance, SOIC8 | RθJ-A_SOIC8 | 160 | °C/W | 1 oz 1 in2 Copper Area | 6 | ||
| Maximum Junction Temperature | TJMAX | 150 | °C | 6 | |||
| Storage Temperature | TSTG | -60 | 150 | °C | 6 | ||
| ESD HBM, Except Pin 6 | ESDHBM | 2000 | V | per JESD22-A114E | 6 | ||
| ESD HBM, Pin 6 | ESDHBM | 1000 | V | per JESD22-A114E | 6 | ||
| ESD Machine Model | ESDMM | 200 | V | per JESD22-A115-A | 6 | ||
| ESD CDM, Except Pin 6 | ESDCDM | 750 | V | per JESD22-C101F | 6 | ||
| ESD CDM, Pin 6 | ESDCDM | 250 | V | per JESD22-C101F | 6 | ||
| Maximum Operating Input Voltage | VCC | 35 | V | 6 | |||
| Operating Junction Temperature | TJ | -40 | 125 | °C | 6 | ||
| VCC UVLO rising (ver. A, D & Q) | VCCON | 4.2 | 4.45 | 4.8 | V | VCC rising | 6 |
| VCC UVLO falling (ver. A, D & Q) | VCCOFF | 3.7 | 3.95 | 4.2 | V | VCC falling | 6 |
| VCC UVLO Hysteresis (ver. A, D & Q) | VCCHYS | 0.5 | V | 6 | |||
| Start-up Delay | tSTART_DEL | 75 | 125 | µs | VCC rising from 0 to VCCON + 1 V @ tr = 10 µs | 6 | |
| Current Consumption, CDRV = 0 nF (B, D, Q) | ICC | 3.5 | 4.5 | 6 | mA | RMIN_TON = RMIN_TOFF = 0 kΩ, CDRV = 0 nF, fSW = 500 kHz | 7 |
| Current Consumption, CDRV = 1 nF (B, D, Q) | ICC | 7.7 | 9 | 10.7 | mA | RMIN_TON = RMIN_TOFF = 0 kΩ, CDRV = 1 nF, fSW = 500 kHz | 7 |
| Current Consumption, CDRV = 10 nF (B, D, Q) | ICC | 40 | 50 | 60 | mA | RMIN_TON = RMIN_TOFF = 0 kΩ, CDRV = 10 nF, fSW = 500 kHz | 7 |
| Current Consumption, no switching | ICC | 1 | 2 | 2.5 | mA | No switching, VCS = 0 V, RMIN_TON = RMIN_TOFF = 0 kΩ | 7 |
| Current Consumption below UVLO | ICC_UVLO | 75 | 125 | µA | No switching, VCC = VCCOFF, 0.1 V, VCS = 0 V | 7 | |
| Current Consumption in Disable Mode | ICC_DIS | 30 | 55 | 75 | µA | VLLD = VCC − 0.1 V, VCS = 0 V | 7 |
| Output Voltage Rise-Time | tr | 40 | 55 | ns | CDRV = 10 nF, 10% to 90% VDRVMAX | 7 | |
| Output Voltage Fall-Time | tf | 20 | 35 | ns | CDRV = 10 nF, 90% to 10% VDRVMAX | 7 | |
| Driver Source Resistance | RDRV_SOURCE | 1.2 | Ω | 7 | |||
| Driver Sink Resistance | RDRV_SINK | 0.5 | Ω | 7 | |||
| Output Peak Source Current | IDRV_SOURCE | 4 | A | 7 | |||
| Output Peak Sink Current | IDRV_SINK | 8 | A | 7 | |||
| Maximum Driver Output Voltage (ver. B, D and Q) | VDRVMAX | 9 | 9.5 | 10.5 | V | VCC = 35 V, CDRV > 1 nF, VLLD = 0 V | 7 |
| Minimum Driver Output Voltage | VDRVMIN | 3.6 | 4 | 4.4 | V | VCC = VCCOFF + 200 mV, VLLD = 0 V | 7 |
| Minimum Driver Output Voltage (LLD) | VDRVLLDMIN | 0 | 0.4 | 1.2 | V | VLLD = VCC − VLLDREC V | 7 |
| Propagation Delay CS to DRV On | tPD_ON | 35 | 60 | ns | VCS goes down from 4 to −1 V, tf_CS = 5 ns | 7 | |
| Propagation Delay CS to DRV Off | tPD_OFF | 12 | 23 | ns | VCS goes up from −1 to 4 V, tr_CS = 5 ns | 7 | |
| CS Bias Current | ICS | -105 | -100 | -95 | µA | VCS = −20 mV | 7 |
| Turn On CS Threshold Voltage | VTH_CS_ON | -120 | -75 | -40 | mV | 7 | |
| Turn Off CS Threshold Voltage | VTH_CS_OFF | -1 | 0 | mV | Guaranteed by Design | 7 | |
| Turn Off Timer Reset Threshold Voltage | VTH_CS_RESET | 0.4 | 0.5 | 0.6 | V | 7 | |
| CS Leakage Current | ICS_LEAKAGE | 0.4 | µA | VCS = 150 V | 7 | ||
| Minimum tON time | tON_MIN | 25 | 56 | 75 | ns | RMIN_TON = 0 Ω | 7 |
| Minimum tOFF time | tOFF_MIN | 160 | 245 | 290 | ns | RMIN_TOFF = 0 Ω | 7 |
| Minimum tON time | tON_MIN | 0.92 | 1 | 1.08 | µs | RMIN_TON = 10 kΩ | 7 |
| Minimum tOFF time | tOFF_MIN | 0.92 | 1 | 1.08 | µs | RMIN_TOFF = 10 kΩ | 7 |
| Minimum tON time | tON_MIN | 4.62 | 5 | 5.38 | µs | RMIN_TON = 50 kΩ | 7 |
| Minimum tOFF time | tOFF_MIN | 4.62 | 5 | 5.38 | µs | RMIN_TOFF = 50 kΩ | 7 |
| LLD Disable Threshold | VLLD_DIS | 0.8 | 0.9 | 1 | V | VLLD_DIS = VCC − VLLD | 8 |
| LLD Recovery Threshold | VLLD_REC | 0.9 | 1 | 1.1 | V | VLLD_REC = VCC − VLLD | 8 |
| LLD Disable Hysteresis | VLLD_DISH | 0.1 | V | 8 | |||
| LLD Disable Time Hysteresis | tLLD_DISH | 45 | µs | Disable to Normal, Normal to Disable | 8 | ||
| LLD Disable Recovery Time | tLLD_DIS_REC | 6 | 12.5 | 16 | µs | 8 | |
| LLD Low Pass Filter Frequency | fLPLLD | 6 | 10 | 13 | kHz | 8 | |
| Driver Voltage Clamp Threshold | VLLDMAX | 2 | V | VDRV = VDRVMAX, VLLDMAX = VCC − VLLD | 8 |
CAD (KiCad official)
- Symbol:
NCP43080DDR2G - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ncp43080ddr2g-etched.step/ncp43080ddr2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp43080ddr2g.step/ncp43080ddr2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (38 pp, sha256
4c3cdc2efeaab3bd, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).