3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNCP3065MNTXG
onsemi · LED Drivers · DFN-8-EP(4x4)
NCP3065MNTXG from onsemi, in a DFN-8-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Switch Collector | output | Internal Darlington switch collector, rated 0 to +40 V with the switch carrying up to 1.5 A. |
| 2 | Switch Emitter | passive | Internal Darlington switch emitter, rated −0.6 to +VCC V when the transistor is off. |
| 3 | Timing Capacitor | passive | Oscillator input for the timing capacitor, limited to −0.2 to +1.4 V. |
| 4 | GND | power_in | Ground pin for all internal circuits and the reference for the maximum ratings. |
| 5 | Comparator Inverting Input | input | Inverting input of the internal comparator, limited to −0.2 V to +VCC. |
| 6 | VCC | power_in | Voltage supply pin, rated 0 to +40 V. |
| 7 | Ipk Sense | input | Peak current sense input that monitors the voltage drop across an external resistor to limit peak current, rated −0.2 to VCC + 0.2 V. |
| 8 | N.C. | unconnected | Pin not connected. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | DFN-8-EP(4x4) |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC (Pin 6) supply voltage | VCC | 0 | 40 | V | 3 | ||
| Comparator Inverting Input (Pin 5) | VCII | -0.2 | V | 3 | |||
| Darlington Switch Collector (Pin 1) | VSWC | 0 | 40 | V | 3 | ||
| Darlington Switch Emitter (Pin 2) | VSWE | -0.6 | V | Transistor OFF | 3 | ||
| Darlington Switch Collector to Emitter (Pins 1-2) | VSWCE | 0 | 40 | V | 3 | ||
| Darlington Switch Current | ISW | 1.5 | A | 3 | |||
| Ipk Sense (Pin 7) | VIPK | -0.2 | V | 3 | |||
| Timing Capacitor (Pin 3) | VTCAP | -0.2 | 1.4 | V | 3 | ||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | 3 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 3 | ||
| Maximum Junction Temperature | TJ(MAX) | 150 | °C | 3 | |||
| Oscillator Frequency | fOSC | 110 | 150 | 190 | kHz | VPin 5 = 0 V, CT = 2.2 nF, TJ = 25°C | 4 |
| Discharge to Charge Current Ratio | IDISCHG/ICHG | 5.5 | 6 | 6.5 | − | Pin 7 to VCC, TJ = 25°C | 4 |
| Current Limit Sense Voltage | VIPK(Sense) | 165 | 185 | 235 | mV | TJ = 25°C | 4 |
| Darlington Switch Collector to Emitter Voltage Drop | VSWCE(DROP) | 1 | 1.3 | V | ISW = 1.0 A, TJ = 25°C | 4 | |
| Collector Off-State Current | IC(OFF) | 0.01 | 100 | µA | VCE = 40 V | 4 | |
| Threshold Voltage tolerance | VTH | -5 | 5 | % | TJ = 0 to +85°C | 4 | |
| Threshold Voltage tolerance | VTH | -10 | 10 | % | TJ = −40°C to +125°C | 4 | |
| Threshold Voltage Line Regulation | REGLINE | -6 | 6 | mV | VCC = 3.0 V to 40 V | 4 | |
| Input Bias Current | ICII in | -1000 | -100 | 1000 | nA | Vin = Vth | 4 |
| Supply Current | ICC | 7 | mA | VCC = 5.0 V to 40 V, CT = 2.2 nF, Pin 7 = VCC, VPin 5 > Vth, Pin 2 = GND | 4 | ||
| Threshold Voltage | VTH | 235 | mV | TJ = 25°C | 4 | ||
| Thermal Shutdown Threshold | 160 | °C | 4 | ||||
| Thermal Shutdown Hysteresis | 10 | °C | 4 | ||||
| Thermal Resistance Junction-to-Air (DFN-8) | RJA | 78 | °C/W | 3 | |||
| Thermal Resistance Junction-to-Case (DFN-8) | RJC | 14 | °C/W | 3 |
CAD (KiCad official)
- Symbol:
NCP3065MNTXG - Footprint:
Package_DFN_QFN:DFN-8-1EP_4x4mm_P0.8mm_EP2.5x3.6mm - 3D model: DFN-8-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
ncp3065mntxg-etched.step/ncp3065mntxg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp3065mntxg.step/ncp3065mntxg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (20 pp, sha256
59e84fb20dc664bf, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).