main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs ncp303lsn27t1g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ncp303lsn27t1g: viewers · Ray
ncp303lsn27t1g-etched.fit.json ncp303lsn27t1g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ncp303lsn27t1g-etched.glb ncp303lsn27t1g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ncp303lsn27t1g-etched.step ncp303lsn27t1g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ncp303lsn27t1g-hero.glb ncp303lsn27t1g: hero from the plain model · Ray
ncp303lsn27t1g-hero.overlay.json ncp303lsn27t1g: hero from the plain model · Ray
ncp303lsn27t1g.glb Publish 0.1.0 · Ray
ncp303lsn27t1g.kicad_mod Publish 0.1.0 · Ray
ncp303lsn27t1g.kicad_sym Publish 0.1.0 · Ray
ncp303lsn27t1g.lbr Publish 0.1.0 · Ray
ncp303lsn27t1g.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md ncp303lsn27t1g: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

NCP303LSN27T1G

onsemi · Supervisor and Reset ICs · TSOP-5

NCP303LSN27T1G from onsemi, in a TSOP-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Reset Output output Open-drain N-channel active-low reset output. Sinks current (Iout typ 0.14 mA at Vout=0.05 V, Vin=0.70 V; typ 3.5 mA at Vout=0.5 V, Vin=1.5 V) when the input drops below the 2.7 V detector threshold. Requires an external pull-up resistor to the desired output rail (rated -0.3 V to 12 V).
2 Input power_in Monitored supply input and device power. Detects when Vin decreases below the 2.7 V threshold (Vdet- 2.646/2.700/2.754 V). Absolute max 12 V; typical operating range 0.8 V to 10 V; supply current typ 0.25 uA at Vin=2.6 V.
3 Ground power_in Device ground reference for the internal bandgap, comparator and output stage.
4 N.C. unconnected No internal connection. Leave floating or tie to ground per PCB preference.
5 CD passive External delay capacitor pin for the programmable reset time delay generator. Internal pull-up resistance Rd typ 1.0 MOhm (0.5-2.0 MOhm); delay-pin threshold Vtcd typ 2.01 V at Vin=2.97 V; internal sink current typ 250 uA (Vin=0.7 V, Vcd=0.1 V) to discharge the cap during a fault. Absolute max -0.3 V to Vin+0.3 V.

Key specifications

Parameter Value
Manufacturer onsemi
Package TSOP-5
Category PMIC
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • NCP303LSN27T1G

CAD (KiCad official)

  • Symbol: NCP303LSN27T1G
  • Footprint: Package_SO:TSOP-5_1.65x3.05mm_P0.95mm
  • 3D model: TSOP-5 (KiCad packages3D, STEP)
  • 3D model files: ncp303lsn27t1g-etched.step / ncp303lsn27t1g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp303lsn27t1g.step / ncp303lsn27t1g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (27 pp, sha256 625daa7711ef4912, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF