main
Ray
Publish 0.1.1
e69ce23
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137
{
"slug": "ncp177amx120tcg",
"version": "0.1.1",
"type": "component",
"description": "onsemi Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, XDFN-4-EP(1x1). Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"pmic",
"ncp177amx120tcg"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ncp177amx120tcg.kicad_sym",
"ncp177amx120tcg.kicad_mod",
"ncp177amx120tcg.glb",
"ncp177amx120tcg.step",
"ncp177amx120tcg.lbr",
"docs/hero.png",
"docs/ncp177amx120tcg-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ncp177amx120tcg-etched.step",
"ncp177amx120tcg-etched.glb"
],
"component": {
"mpn": "NCP177AMX120TCG",
"manufacturer": "onsemi",
"package": "XDFN-4-EP(1x1)",
"pin_count": 5,
"category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
"datasheet": "https://www.onsemi.com/pdf/datasheet/ncp177amx120tc-d.pdf",
"parts": {
"symbol": "ncp177amx120tcg.kicad_sym",
"footprint": "ncp177amx120tcg.kicad_mod",
"model_3d": "ncp177amx120tcg-etched.glb",
"model_3d_plain": "ncp177amx120tcg.glb",
"model_3d_step": "ncp177amx120tcg-etched.step",
"model_3d_step_plain": "ncp177amx120tcg.step",
"lbr": "ncp177amx120tcg.lbr"
},
"pins": [
{
"number": "1",
"name": "OUT",
"type": "power_out",
"description": "Regulated output voltage pin. Fixed 1.20 V nominal (AMX120TCG option) with ±0.8% accuracy at Tj = 25 C, sourcing up to 500 mA. Requires a 1 uF ceramic (X7R/X5R) output capacitor placed as close as possible to this pin and GND; minimum effective capacitance 0.8 uF, max ESR 0.5 ohm. On A-version an internal ~60 ohm active-discharge FET pulls this pin to GND when EN is low."
},
{
"number": "2",
"name": "GND",
"type": "power_in",
"description": "Power-supply ground / device reference. Should be connected to the ground plane together with the exposed pad for good thermal dissipation."
},
{
"number": "3",
"name": "EN",
"type": "input",
"description": "Active-high enable input. VENH >= 1.0 V enables the regulator; VENL <= 0.4 V disables it (and engages the ~60 ohm output active-discharge on the A-version). Absolute max -0.3 V to 6.0 V; input current 0.15 uA typ at 5.5 V. An internal ~300 nA pull-down keeps the part off if EN is left floating; tie EN to IN if the enable function is unused."
},
{
"number": "4",
"name": "IN",
"type": "power_in",
"description": "Power-supply input voltage. Operating range 1.6 V to 5.5 V (absolute max -0.3 V to 6.0 V). Requires a 1 uF or larger ceramic X7R/X5R input capacitor placed close to this pin and GND to ensure stability and provide a low-impedance path for AC noise."
},
{
"number": "EP",
"name": "EPAD",
"type": "passive",
"description": "Exposed thermal pad on the package underside. Must be tied to the ground plane for proper power dissipation (RθJA = 223 C/W on the JEDEC board). Electrically the datasheet does not designate it as a signal pin, but it should be connected to GND.",
"thermal_pad": true
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
"cad": "KiCad official (CC-BY-SA 4.0)",
"cad_basis": {
"from": [
"README CAD section (factory cad_wording)",
".kicad_mod model path agrees"
],
"missing": []
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ncp177amx120tcg.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
1.002,
1,
0.385
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "1fcbe51eaca76e761de8aac3070a55467f3017cf1867ff062861bcfffd48546a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ncp177amx120tcg-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
1.002,
1,
0.385
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "c1c99830580571bbe53bf146392f8b96828761391c87f5e13ea8779eb93a2fe7",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"visibility": "public"
}